Restorative Dentistry and Endodontics

  • 제36권5호
  • /
  • Pages.409-418
  • /
  • 2011
  • /
  • 2234-7658(pISSN)
  • /
  • 2234-7666(eISSN)
대한치과보존학회 (The Korean Academy of Conservative Dentistry)
권호 표지
DOI QR코드

DOI QR Code

2단계 접착제의 상아질 결합강도에 대한 Er:YAG 레이저 조사 영향

Effect of Er:YAG lasing on the dentin bonding strength of two-step adhesives

  • 송병춘 (조선대학교 치과대학 치과보존학교실) ;
  • 조영곤 (조선대학교 치과대학 치과보존학교실) ;
  • 이명선 (서영대학교 치위생과)
  • Song, Byeong-Choon (Department of Conservative Dentistry, Chosun University School of Dentistry) ;
  • Cho, Young-Gon (Department of Conservative Dentistry, Chosun University School of Dentistry) ;
  • Lee, Myung-Seon (Department of Dental Hygiene, SeoYeong University)
  • 투고 : 2011.07.29
  • 심사 : 2011.08.29
  • 발행 : 2011.09.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

연구목적: 이 연구는 상아질 표면에 Er:YAG 레이저를 조사하지 않는 군, 레이저를 조사한 군, 레이저를 조사한 후 부가적인 산처리를 한 군으로 분류하여 2단계 단일병 전부식 접착시스템과 자가부식 프라이머 접착시스템을 이용하여 복합레진을 접착하였을 때 이러한 표면처리가 복합레진의 미세전단 결합강도와 결합계면에 미치는 영향을 비교하기 위하여 시행하였다. 연구 재료 및 방법: 32개의 발거된 대구치의 교합면측 상아질을 이용하였고, 상아질의 표면처리는 1군과 4군에서 각각 인산과 자가부식 프라이머로 하였으며, 2군과 5군은 Er:YAG 레이저로 에칭처리하였고, 3군과 6군은 레이저로 에칭한 후 다시 각각 인산과 자가부식 프라이머로 하였다. 1군, 2군, 3군은 Single Bond 2와 Z 250 (3M ESPE)을 이용하였고, 4군, 5군, 6군은 Clearfil SE Bond와 Clearfil AP-Z (Kuraray)을 이용하여 상아질 면에 Tygon tube를 접착하였다. 각 군의 미세전단 결합강도를 측정한 후 통계 처리하였고, 또한 6개의 시편에서 복합레진과 상아질 계면을 주사전자현미경하에서 관찰하였다. 결과: Single Bond 2를 사용한 군에서 2군의 결합강도는 1군과 3군보다 통계학적으로 낮게 나타났으며, Clearfil SE Bond를 사용한 군에서 4군, 5군, 6군의 결합강도는 각각 통계학적으로 유의한 차이를 나타내었다(p < 0.05). 2군과 5군은 아주 짧고 가는 레진테그가 관찰되었고, 3군과 6군은 길고 가는 레진테그와 레진테그의 측지가 관찰되었다. 결론: 레이저로 에칭 처리한 상아질에 대한 부가적인 산 처리나 자가부식 프라이머의 처리는 상아질의 접착력을 향상시켰다.

Objectives: The purpose of this study was to compare the microshear bond strength (${\mu}$SBS) and bonding interfaces of two-step total-etching and self-etching adhesive systems to three etch types of dentin either the acid etched, laser etched or laser and acid etched. Materials and Methods: The occlusal dentinal surfaces of thirty human molars were used. They were divided into six groups: group 1, 37% $H_3PO_4$ + Single Bond 2 (3M ESPE); group 2, Er:YAG laser (KEY Laser 3, KaVo) + Single Bond 2; group 3, Er:YAG laser + 37% $H_3PO_4$ + Single Bond 2; group 4, Clearfil SE Primer + Bond (Kuraray); group 5, Er:YAG laser + Clearfil SE Bond; group 6, Er:YAG laser + Clearfil SE Primer + Bond. The samples were subjected to ${\mu}$SBS testing 24 hr after bonding. Also scanning microscopic evaluations were made on the resin-dentin interfaces of six specimens. Results: The ${\mu}$SBS of group 2 was significantly lower than that of groups 1 and 3 in Single Bond 2 (p < 0.05). There were significant differences among the uSBS of groups 4, 5, and 6 in Clearfil SE Bond (p < 0.05). Very short and slender resin tags were observed in groups 2 and 5. Long and slender resin tags and lateral branches of tags were observed in groups 3 and 6. Conclusions: Treatment of dentin surface using phosphoric acid or self-etching primer improved the adhesion of Er:YAG lased dentin.

키워드

참고문헌

  1. Tay FR, Carvalho R, Sano H, Pashley DH. Effect of smear layers on the bonding of a self-etching primer to dentin. J Adhes Dent 2000;2:99-116.
  2. Prati C, Chersoni S, Mongiorgi R, Pashley DH. Resin-infiltrated dentin layer formation of new bonding systems. Oper Dent 1998;23:185-194.
  3. Hibst R, Keller U, Steiner R. Die wirkung gepulster Er:YAG Laserstrhlung auf zahngewebe. Lasers Sur Med 1988;4:163-165.
  4. Sakakibara Y, Ishimaru K, Takamizu M. A study on bond strength to dentin irradiated by Erbium:YAG laser. Jpn J Conservative Dent 1998;41:207-219.
  5. Barceleiro MO, de Mello JB, de Mello GS, Dias KR, de Miranda MS, Filho HRS. Hybrid layer thickness and morphology: the influence of cavity preparation with Er:YAG laser. Oper Dent 2005;30:304-310.
  6. Gimbel CB. Hard tissue laser procedures. Dent Clin North Am 2000;44:931-953.
  7. Keller U, Hibst R. Experimental studies of the application of the Er:YAG laser on dental hard substances:II. Light microscopic and SEM investigations. Lasers Surg Med 1989;9:345-351. https://doi.org/10.1002/lsm.1900090406
  8. Visuri SR, Gilbert JL, Wright DD, Wigdor HA, Walsh JT Jr. Shear strength of composite bonded to Er:YAG laser-prepared dentin. J Dent Res 1996;75:599-605. https://doi.org/10.1177/00220345960750011401
  9. Sassi JF, Chimello DT, Borsatto MC, Corona SA, Pecora JD, Palma-Dibb RG. Comparative study of the dentin/adhesive systems interface after treatment with Er:YAG laser and acid etching using scanning electron microscope. Laser Surg Med 2004;34:385-390. https://doi.org/10.1002/lsm.20064
  10. Giachetti L, Scaminaci Russo D, Scrpelli F, Vitale M. SEM analysis of dentin treated with the Er:YAG laser: a pilot study of the consequences resulting from laser use on adhesion mechanism. J Clin Laser Med Surg 2004;22:35-41. https://doi.org/10.1089/104454704773660958
  11. Dunn WJ, Davis JT, Bush AC. Shear bond strength and SEM evaluation of composite bonded to Er:YAG laser-prepared dentin and enamel. Dent Mater 2005; 21:616-624. https://doi.org/10.1016/j.dental.2004.11.003
  12. Martl′nez-Insua A, Da Silva Dominguez L, Rivera FG, Santana-Penl′n UA. Differnces in bonding to acidetched or Er:YAG-laser-trated enamel and dentin surfaces. J Proshet Dent 2000;84:280-288. https://doi.org/10.1067/mpr.2000.108600
  13. Ramos RP, Chinelatti MA, Chimello DT, Borsatto MC, Pecora JD, Palma-Dibb RG. Bonding of self-etching and total-etch systems to Er:YAG laser-irradiated dentin. Tensile bond strength and scanning electron microscopy. Braz Dent J 2004;15(Spec No):S19-20. https://doi.org/10.1590/S0103-64402004000100004
  14. Bertrand MF, Semez G, Leforestier E, Muller-Bolla M, Nammour S, Rocca JP. Er:YAG laser cavity preparation and composite resin bonding with a singlecomponent adhesive system: relationship between shear bond strength and microleakage. Laser Surg Med 2006;38:615-623. https://doi.org/10.1002/lsm.20342
  15. Van Meerbeek B, De Munk J, Mattar D, Van Landuyt K, Lambrechts P. Microtensile bond strength of an etch&rinse and self-etch adhesive to enamel and dentin as a function of surface treatment. Oper Dent 2003;28:647-660.
  16. Eguro T, Maeda T, Otsuki M, Nishimura Y, Katsuumi I, Tanaka H. Adhesion of Er-YAG laser-irradiated dentin and composite resins: application of various treatments on irradiated surface. Laser Surg Med 2002;30:267-272. https://doi.org/10.1002/lsm.10043
  17. Bertrand MF, Rocca JP. Er:YAG laser and conservative dentistry. EMS-Stomatologie 2005;1:104-115. https://doi.org/10.1016/j.emcsto.2005.01.007
  18. Ceballos L, Osorio R, Toledane M, Marshall GW. Microleakage of composite restorations after acid or Er-YAG laser cavity treatments. Dent Mater 2001;17: 340-346. https://doi.org/10.1016/S0109-5641(00)00092-0
  19. Moon YH, Kim JR, Choi KK, Park SJ. The Effect of thermocycling on the durability of dentin adhesive systems. J Kor Acad Cons Dent 2007;32:222-235. https://doi.org/10.5395/JKACD.2007.32.3.222
  20. Kim CY, Shin DH. Microleakage of composite resin restoration according to the number of thermocycling. J Kor Acad Cons Dent 2007;32:377-384. https://doi.org/10.5395/JKACD.2007.32.4.377
  21. Kim YM, Park JW, Lee CY, Song YJ, Seo DK, Rho BD, The influence of cavity configuration on the microtensile bond strength between composite resin and dentin. J Kor Acad Cons Dent 2008;33:472-480. https://doi.org/10.5395/JKACD.2008.33.5.472
  22. Kameyama A, Aizawa K, Kato J, Hirai Y. Tensile bond strength of single-step self-etch adhesives to Er:YAG laser-irradiated dentin. Photomed Laser Surg 2009;27:3-10. https://doi.org/10.1089/pho.2007.2170
  23. Oliveira DC, Manhaes LA, Marques MM, Matos AB, Microtensile bond strength analysis of different adhesive systems and dentin prepared with high-speed and Er:YAG laser: a comparative study. Photomed Laser Surg 2005;23:219-224. https://doi.org/10.1089/pho.2005.23.219
  24. de Oliveira MT, de Freitas PM, de Paula Eduardo C, Ambrosano GM, Giannini M. Influence of diamond sono-abrasion, air-abrasion and Er:YAG laser irradiation on bonding of different adhesive systems to dentin. Eur J Dent 2007;1:158-166.
  25. Gurgan S, Kiremitci A, Cakir FY, Yazici E, Gorucu J, Gutknecht N. Shear bond strength of composite bonded to erbium:yttrium -aluminum-garnet laser-prepared dentin. Lasers Med Sci 2009;24:117-122. https://doi.org/10.1007/s10103-007-0532-0
  26. Bertrand MF, Hessleyer D, Muller-Bolla M, Nammour S, Rocca JP. Scanning electron microscopic evaluation of resin-dentin interface after Er:YAG laser preparation. Laser Surg Med 2004;35:51-57. https://doi.org/10.1002/lsm.20063

피인용 문헌

  1. Ablation of carious dental tissue using an ultrashort pulsed laser (USPL) system vol.30, pp.5, 2015, https://doi.org/10.1007/s10103-014-1594-4