참고문헌
- Lee, Y. J., Kim, G.C. and Pyo, Y. D., 2005, "The Influence of Operating Conditions on Fuel Economy of the Hybrid Electric Vehicle," International Journal of Automotive Technology, Vol. 13, No. 3, pp. 35-40.
- Lim, S. W., 1995, "Advanced Technology for Lightweight Automobile," Journal of The Korean Society for Heat Treatment, Vol. 21, No. 3, pp. 162-170.
- Lee, D. G., 2006, "Design and Manufacturing of Composite Automotive Parts," Auto Journal, Vol. 29, No. 1, pp. 27-33.
- Lee, S. K., 1997, "The Composite Material for Automobiles," Journal of the KSME, Vol. 39, No. 2, pp. 91-100.
- Lee, S. K. and Kim, B. S., 1996, "Composite Applications to Automobiles," Transactions of the Korean Society of Automotive Engineers, Vol. 18, No. 5, pp. 96-120.
- Lee, J. W., 2007, "Polymer Material for Automobile," Korea Institute of Science and Technology Information.
- Cho, B. K., Lee, S. S. and Cho, M. H., 1995, "Polymeric Composite Materials for Automobile," Polymer, Vol. 6, No. 4, pp. 314-325.
- Lee. Y. H., Park, J. H., Ahn, J. H., Choi, J. H. and Kwon, J. H., 2009, "A Study on Failure Strength of the Hybrid Composite Joint," Journal of the Korea Society of Composite Materials, Vol. 22, No. 2, pp. 7-13.
- Groth, H. L., 1985, "A Method to Prodict Fracture in an Adehesively Bonded Joint," International Journal of Adhesion and Adhesives, Vol. 5, pp. 19-22. https://doi.org/10.1016/0143-7496(85)90041-7
- Hart-Smith, L.J., 1980, "Mechnically Fastened Joints for Advanced Composites, Phenomenological Considerations and Simple Analysis," Fibrous Composite in Structural Design, Plenium Press, pp. 543-574.
- Kim, W. S. and Lee, J. J, 2008, "Interfacial Fracture Toughness Measurement of Composite/ etal Bonding," Journal of the Korea Society of Composite Materials, Vol. 21, No. 4, pp. 7-14.
- Kinloch, A. J., 1987, "Adhesion and Adhesives: Science and Technology," Chapman and Hall.
- Kim, K. S., Lee, Y. M. and Kim, C. G., 2005, "Failure Mode and Strength of Unidirectional Composite Single Lap Bonded Joints II Failure Prediction," Journal of the Korea Society of Composite Materials, Vol. 18, No. 1, pp. 1-9
- Anderson, G. P. and DeVries, K. L., 1989, "Predicting Strength of Adhesive Joint from Test Results," International Journal of Fracture, Vol. 39, pp. 191-200. https://doi.org/10.1007/BF00047449
- Park, S. G., 2008, "Wear Test Guide," Neoplus Co. Ltd.
- Choi, J. H., Jeon, Y. J. and Kwon, J. H., 2002, "A Study on the Strength of Mechanically Fastened Composite Joint," Journal of the Korea Society of Composite Materials, Vol. 15, No. 4, pp. 9-16.
- Lee. B. W., Lee, S. H., Kim, C. G., Yoon, B. I. and Back, J, K., 2008, "A Study on the Low Speed Impact Response and Frictional Characteristics of Shear Thickening Fluid Impregnated Kevlar Fabrics," Journal of the Korea Society of Composite Materials, Vo. 21, No. 2, pp. 15-24.
- Park, S. J., Seo, M. K., Cho, M. S. and Lee, J. R., 2000, "Influence of Oxidation Inhibitor on Carbon-Carbon Composites: 5. Studies on Antioxidation Properties of the Composites," Polymer, Vol. 24, No. 2, pp. 237-244.
- Yoon, B. S., 1998, "A Study on the Glass Fiber Reinforced Polypropylene Composites," Polymer, Vol. 22, No. 4, pp. 633-641.
- Lee, J. B. and Cho, M. H., 2009, "The Effect of Surface Micro Texturing on Friction and Wear of Polyoxymethylene," Journal of Korean Society of Tribologist and Lubrication Engineers, Vol. 25, No. 3, pp. 141-149.