1 |
Park, S. G., 2008, "Wear Test Guide," Neoplus Co. Ltd.
|
2 |
Choi, J. H., Jeon, Y. J. and Kwon, J. H., 2002, "A Study on the Strength of Mechanically Fastened Composite Joint," Journal of the Korea Society of Composite Materials, Vol. 15, No. 4, pp. 9-16.
과학기술학회마을
|
3 |
Lee. B. W., Lee, S. H., Kim, C. G., Yoon, B. I. and Back, J, K., 2008, "A Study on the Low Speed Impact Response and Frictional Characteristics of Shear Thickening Fluid Impregnated Kevlar Fabrics," Journal of the Korea Society of Composite Materials, Vo. 21, No. 2, pp. 15-24.
과학기술학회마을
|
4 |
Park, S. J., Seo, M. K., Cho, M. S. and Lee, J. R., 2000, "Influence of Oxidation Inhibitor on Carbon-Carbon Composites: 5. Studies on Antioxidation Properties of the Composites," Polymer, Vol. 24, No. 2, pp. 237-244.
과학기술학회마을
|
5 |
Yoon, B. S., 1998, "A Study on the Glass Fiber Reinforced Polypropylene Composites," Polymer, Vol. 22, No. 4, pp. 633-641.
|
6 |
Lee, J. B. and Cho, M. H., 2009, "The Effect of Surface Micro Texturing on Friction and Wear of Polyoxymethylene," Journal of Korean Society of Tribologist and Lubrication Engineers, Vol. 25, No. 3, pp. 141-149.
과학기술학회마을
|
7 |
Anderson, G. P. and DeVries, K. L., 1989, "Predicting Strength of Adhesive Joint from Test Results," International Journal of Fracture, Vol. 39, pp. 191-200.
DOI
|
8 |
Lee, Y. J., Kim, G.C. and Pyo, Y. D., 2005, "The Influence of Operating Conditions on Fuel Economy of the Hybrid Electric Vehicle," International Journal of Automotive Technology, Vol. 13, No. 3, pp. 35-40.
과학기술학회마을
|
9 |
Lim, S. W., 1995, "Advanced Technology for Lightweight Automobile," Journal of The Korean Society for Heat Treatment, Vol. 21, No. 3, pp. 162-170.
과학기술학회마을
|
10 |
Lee, S. K. and Kim, B. S., 1996, "Composite Applications to Automobiles," Transactions of the Korean Society of Automotive Engineers, Vol. 18, No. 5, pp. 96-120.
과학기술학회마을
|
11 |
Lee, J. W., 2007, "Polymer Material for Automobile," Korea Institute of Science and Technology Information.
|
12 |
Cho, B. K., Lee, S. S. and Cho, M. H., 1995, "Polymeric Composite Materials for Automobile," Polymer, Vol. 6, No. 4, pp. 314-325.
|
13 |
Lee. Y. H., Park, J. H., Ahn, J. H., Choi, J. H. and Kwon, J. H., 2009, "A Study on Failure Strength of the Hybrid Composite Joint," Journal of the Korea Society of Composite Materials, Vol. 22, No. 2, pp. 7-13.
과학기술학회마을
|
14 |
Groth, H. L., 1985, "A Method to Prodict Fracture in an Adehesively Bonded Joint," International Journal of Adhesion and Adhesives, Vol. 5, pp. 19-22.
DOI
ScienceOn
|
15 |
Hart-Smith, L.J., 1980, "Mechnically Fastened Joints for Advanced Composites, Phenomenological Considerations and Simple Analysis," Fibrous Composite in Structural Design, Plenium Press, pp. 543-574.
|
16 |
Kim, W. S. and Lee, J. J, 2008, "Interfacial Fracture Toughness Measurement of Composite/ etal Bonding," Journal of the Korea Society of Composite Materials, Vol. 21, No. 4, pp. 7-14.
과학기술학회마을
|
17 |
Kinloch, A. J., 1987, "Adhesion and Adhesives: Science and Technology," Chapman and Hall.
|
18 |
Kim, K. S., Lee, Y. M. and Kim, C. G., 2005, "Failure Mode and Strength of Unidirectional Composite Single Lap Bonded Joints II Failure Prediction," Journal of the Korea Society of Composite Materials, Vol. 18, No. 1, pp. 1-9
과학기술학회마을
|
19 |
Lee, S. K., 1997, "The Composite Material for Automobiles," Journal of the KSME, Vol. 39, No. 2, pp. 91-100.
|
20 |
Lee, D. G., 2006, "Design and Manufacturing of Composite Automotive Parts," Auto Journal, Vol. 29, No. 1, pp. 27-33.
|