Acknowledgement
Supported by : 한국연구재단
References
- U.S, 1997, Micro Electro Mechanical System (MEMS) Markets, Frost & Sulivan.
- Chung, S. J., 2000, A Micro Cycloid-Gear System Fabricated by Multi-Exposure LIGA Technique, Microsyst Technol, Vol. 6, pp. 149-153. https://doi.org/10.1007/s005420050185
- Ogawa, K. Suzuki, S. Kaneko, Y. Nakano, Y. Ishikawa and T. Kitahara, 1997, Tensile Testing of Micro Fabricated Thin Films, Microsyst Technol, Vol. 3, pp. 117-121. https://doi.org/10.1007/s005420050067
- Kim, J. W., Lee, S. J., Lee, J. M. and Kim, B. M., 2009, "Extrusion of Spur Gear Using High-Energy Ball milled Al-78Zn Powder," Trans. of the KSME (A), Vol. 33, No. 4, pp. 440-446. https://doi.org/10.3795/KSME-A.2009.33.4.440
- Lee, K. H., Kim, J. W., Hwang, D. W., Kim, J. H., Chang, S. S. and Kim, B. M., 2009, "Powder Extrusion with Superplastic Al-78Zn Powders for Micro Spur Gears," Proc. Kor. Soc. Tech. Plast. Conf., pp. 387-390.
- Kim, J. W., Lee, K. H., Hwang, D. W. and Kim, B. M., 2009, "Improvement of Fatigue Resistance of the Miniature Gear by Controlling Holing Time of Temperature in the Hot Powder Extrusion Process," Proc. Kor. Soc. Tech. Plast. Conf., pp. 449-452.
- Kwon, Y. S., Lee, H. T. and Kim, K. T., 1996, "Analysis for Cold Die Compaction of Metal Powder," Trans. of the KSME (A), Vol. 20, No. 6, pp. 1893-1902.
- Kim, K. T. and Kim, J. S., 1997, "Stage 1 Compaction Behavior of Tool Steel Under Die Pressing," Trans. of the KSME (A), Vol. 21, No. 7, pp. 1073-1080.
- Lee, S. C. and Kim. K. T., 2002, "Densification Behavior of Aluminum Alloy Powder Under Cold Compaction," Int. J. Mech. Sci., Vol. 44, pp. 1295-1308. https://doi.org/10.1016/S0020-7403(02)00054-1
- Tavoosi. M., Karimzadeh. F., Enayati. M. H. and Heidarpour. A., 2008, "Bulk Al-Zn/Al2O3 Nanocomposite Prepared by Reactive Milling and Hot Pressing Methods,"
- Bauser. M., Sauer. G. and Siegert. K., 2006, Extrusion, ASM International, USA.
- Kuhn, H. A. and Ferguson, B. L., 1990, Powder Forging, Metal Powder Industries Federation, USA.