Development of high-performance cement grout for ground heat exchangers

지중열교환기용 고성능 시멘트 그라우트 개발

  • 이동철 (코오롱건설 기술연구센터) ;
  • 양희정 (코오롱건설 기술연구센터) ;
  • 전중규 (코오롱건설 기술연구센터) ;
  • 서신석 (한일시멘트 테크니컬센터) ;
  • 최용민 (한일시멘트 테크니컬센터)
  • Received : 2011.05.06
  • Accepted : 2011.05.30
  • Published : 2011.06.01

Abstract

Performance of ground-source heat pumps (GSHPs) is mainly affected by ground heat exchangers which makes up more than 40% of construction cost. Exact construction and grout as backfill are important, because it is difficult to repair after being installed. As grout materials, bentonite grout material and cement material are used In this paper, thermal conductivity according to mix proportion of cement grout has been experimentally studied. Some variables were set to evaluate thermal conductivities according to change in cement content, unit water ratio, mass per volume of fresh mortar, and aggregate types. From the experimental analysis, high performance cement grout has been proposed.

Keywords

References

  1. 백성권, 전중규, 안형준, 2007, "지열냉난방시스템 수직형 지중열교환기 그라우트의 열적 특성에 관한 연구", 한국신.재생에너지학회 추계논문집, pp. 546-549.
  2. 최항석, 2009, 지중열교환기용 그라우팅, 설비학회 제 38권, pp. 56-60.
  3. 김국한, 김상은, 방기성, 김진근, 2001, "콘크리트의 열전도율에 관한 실험적 연구", 한국콘크리트학회 논문집, 제13권 4호, pp. 305-313.
  4. KS L ISO 679, 2006, Methods of testing cements - Determination of strength, 한국표준정보망.
  5. Japan Concrete institute, 1982, "The measuring methods of conductivity, diffusivity, and specific heat of concrete and their application", J. Japan Concr., pp. 11-14.
  6. Yunsheng Xu, 2000, "Effect of sand addition on the specific heat and thermal conductivity of cement", Cement and Concrete Research 30, pp. 59-61. https://doi.org/10.1016/S0008-8846(99)00206-9
  7. Rohsenow, W.M., 1973, handbook of Heat Transfer, Mcgraw-Hill, New York.