참고문헌
- Voss, H., and Huff, J., 1997, "Portable Fuel Cell Power Generator," J. of Power Sources, Vol. 65, pp. 155-158. https://doi.org/10.1016/S0378-7753(97)02484-1
- Kim, H. G., Kim, Y. S., Yang, S. M., and Nah, S. C., 2005, "TA Study on the Performance and the Efficiency in Polymer Electrolyte Embrane Fuel Cell," J. of KSMTE, Vol. 14, No. 4, pp. 75-80.
- Kim, H. G., Kang, S. S., Kwac, L. K., Song, H. Y., and Kang, Y. W., 2007, "A Study on the Performance Analysis and Design of Cathode in Fuel Cells," J. of KSMTE, Vol. 16, No. 1, pp. 75-79.
- Wang, L., Husar, A., Zhou, T., and Liu, H., 2003, "Aparametric Study of PEM Fuel Cell Performance," Int. Journal of Hydrogen Energy, Vol. 28, pp. 1263-1272. https://doi.org/10.1016/S0360-3199(02)00284-7
- Himanen, O., Hottinen, T., and Tuurala, S., 2007, "Operation of a Planar Free-Breathing PEMFC in a Dead-End Mode," Electrochemistry Communications, Vol. 9, No. 5, pp. 891-894. https://doi.org/10.1016/j.elecom.2006.12.002
- Cousseau, P., Hirschi, R., Frehner, B.,Gamper, S., and Maillefer, D., 2001, "Improved Micro-flow regulator for drug delivery systems," IEEE MEMS Conference, pp. 527-530.
- Yang, B., and Lin, Q., 2007, "A Planar Compliance- Based Self-Adaptive Microfluid Variable Resistor," Journal of MEMS, Vo. 16, pp. 411-419. https://doi.org/10.1109/JMEMS.2007.892892
- Doh, I., and Cho, Y. H., 2009, "Passive Flow-Rate Regulators using Pressure-Dependent Autonomous Deflection of Parallel Membrane Valves," Lab Chip, Vol. 9, pp. 2070-2075. https://doi.org/10.1039/b821524c
- Debray A., Nakakubo T., Ueda K., Mogi S., Shibata M., and Fujita H., 2005, A Passive Micro Gas Regulator for Hydrogen Flow Control," J. Micromech. Microeng. Vol. 15, pp. 202-209. https://doi.org/10.1088/0960-1317/15/9/S05
- Kim, D. W., Hong, K. P., Cho, M. W., and Lee, E. S., 2010, "Mirrorlike Machining of SUS304 by Combined Process of EP and MR Polishing," J. of KSMTE, Vol. 19, No. 2, pp. 267-274.