DOI QR코드

DOI QR Code

Source Localization of Single Impact Based on Higher Order Time Frequency

고차-시간 주파수 기술을 이용한 평판에서의 충격 위치추적

  • 문유성 (인하대학교 대학원 기계공학과) ;
  • 이상권 (인하대학교) ;
  • 양홍군 (인하대학교 대학원 기계공학과)
  • Received : 2010.10.13
  • Accepted : 2011.01.18
  • Published : 2011.02.20

Abstract

The aim of this paper is to present the method of identifying the impact location on the plate. This basic research has the future purpose to achieve the human-interaction technology based on the signal processing, piezoelectric materials, and wave propagation. The present work concerning the location identification of a single impact on the plate simulated the waveform numerically generated by impact force and applied the SWFOM(sliced Wigner higher fourth order moment) to the waveform to get the arrival time differences due to impact force between three sensors attached to the plate. The simulated signal is useful to get the information for time interval for the only direct wave. This information is used the source localization by using experimental work. The measured signal is also used for source localization of a single impact based on the higher order time frequency as a novel work.

Keywords

References

  1. Kishimoto, K., Inoue, H., Hamada, M. and Shibuya, T., 1995, Time Frequency Analysis of Dispersive Waves by Means of Wavelet Transform, J. Appl. Mech., Vol. 62, pp. 841-846. https://doi.org/10.1115/1.2896009
  2. Gaul, L. and Hurlebaus, S., 1997, Identification of the Impact Location a Plate Using Wavelets, Mech. Sys. Signal Process, Vol. 12, pp. 783-795.
  3. Hong, J. C, Sun, K. H. and Kim, Y. Y., 2005 Dispersion-based Short-time Fourier Transform Applied to Dispersive Wave Analysis, Journal of the Acoustical Society of America, Vol. 117, pp. 2949-2960. https://doi.org/10.1121/1.1893265
  4. Jeong, H. and Jang, Y. S., 2000, Fracture Source Localization in Thin Plates Using the Wavelet Transform of Dispersive Waves,” IEEE Tran. Ultra. Ferroelectr. Freq. Control, 47, pp. 612-619. https://doi.org/10.1109/58.842048
  5. Loutridis, S., Douka, E., Hadjileontiadis, L. J., and Torchidis, A., 2005, A Two Dimensional Wavelet Transform Fro Detection of Cracks in Plates, Engineering Structure, Vol. 27, pp. 1327-1338. https://doi.org/10.1016/j.engstruct.2005.03.006
  6. Choi, K. S., Choi, Y. C., Park, J. H. and Kim, W. W., 2008, Source Localization Technique for Metallic Impact Source by Using Phase Delay between Different Type Sensors, Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 18, No. 11, pp. 1143-1149. https://doi.org/10.5050/KSNVN.2008.18.11.1143
  7. Lee, S. K., Banerjee, S. and Mal, A., 2007, Identification of Impact Force on a Thick Plate Based on the Elastodynamic and Higher-order Time-frequency Analysis, Proc. IMechE Part C, J. Mechanical Engineering Science, Vol. 221, pp. 1249-1263. https://doi.org/10.1243/09544062JMES674
  8. Lih, S. S. and Mal, A. K., 1995, On the Accuracy of Approximate Plate Theories for Wave Field Calculations in Composite Laminates, Wave Motion, Vol. 21, pp. 17-24. https://doi.org/10.1016/0165-2125(94)00038-7
  9. Hellier, C. J., 2003, Handbook of Nondestructive Evaluation, McGraw-Hill Company, New York.
  10. Graff, K. F., 1953, Wave Motion in Elastic Solids, Dover Publications Inc., New York.
  11. Tobis, A., 1976, Acoustic Emission Source Location in Two Dimensions by an Array of Three Sensors, Non-destructive Testing, Vol. 9, pp. 9-12. https://doi.org/10.1016/0029-1021(76)90027-X
  12. Fonollosa, J. R. and Nikias, C. L., 1993, Wigner-Higher-Order Moment Spectra Definition, Properties, Computation and Application to Transient Signal Analysis, IEEE Transactions on Signal Processing, Vol. 41, pp. 245-266. https://doi.org/10.1109/TSP.1993.193143

Cited by

  1. Comparative Study on the Measures of Similarity for the Location Template Matching(LTM) Method vol.24, pp.4, 2014, https://doi.org/10.5050/KSNVE.2014.24.4.310