References
- Rich, D. G., 1973, "The Effect of Fin Spacing on the Heat Transfer and Friction Performance of Multi-Row Plate Fin-and-Tube Heat Exchangers," ASHRAE Trans., Vol. 79, No. 2, pp. 137-145.
- Wang, C.-C., Chang, Y.-J., Hsieh, Y.-C. and Lin, Y.-T., 1996, "Sensible Heat and Friction Characteristics of Plate Fin-and-Tube Heat Exchangers Havinf Plain Fins," Int. J. Refrig., Vol. 19, No. 4, pp. 223-230. https://doi.org/10.1016/0140-7007(96)00021-7
- Min, C-K., Cho, J-P., Oh, W-K., and Kim, N-H., 2004, "Heat Transfer and Pressure Drop Characteristics of Heat Exchangers Having Plain Fins Under Dry and Wet Conditions," Korean J. Air-Cond. and Refrigeration Engineering, Vol. 16, No. 3, pp. 218-229.
- Mirkovic, Z., 1974, "Heat Transfer And Flow Resistance Correlation of Helically Finned Tubes in Cross Flow of Staggered Tube Banks," Heat Exchangers: Design and Theory Source Book, edited by N. H. Afgan and E. U. Schlunder, pp. 559-584.
- Eckels P. W. and Rabas, T. J., 1985, "Heat Transfer and Pressure Drop of Typical Air Cooler Finned Tubes," J. Heat Transfer, Vol. 107, pp. 198-204. https://doi.org/10.1115/1.3247378
- Briggs, D. E. and Young, E. H., 1963, "Convection Heat Transfer and Pressure Drop of Air Flowing Across Triangular Pitch Banks of Finned Tubes," Chemical Engineering Progress Symposium Series, Vol. 59, No. 41, pp. 1-10.
- Robinson, K. K. and Briggs, D. E., 1964, "Pressure Drop of Air Flowing Across Triangular Pitch Banks of Finned Tubes," Chemical Engineering Progress Symposium Series, Vol. 62, No. 64, pp. 177-182.
- Kim, N.-H., Youn, B. and Webb, R. L., 1999, "Air-Side Heat Transfer and Friction Correlations for Plain Fin-and-Tube Heat Exchangers with Staggered Tube Arrangements, " J. Heat Transfer, Vol. 121, pp. 662-667. https://doi.org/10.1115/1.2826030
- Wang, C.-C., Chi, K.-Y. and Chang, C.-J., 2000, "Heat Transfer and Friction Characteristics of Plain Fin-and-Tube Heat Exchangers, Part II: Correlation," Int. J. Heat Mass Transfer, Vol. 43, pp. 2693-2700. https://doi.org/10.1016/S0017-9310(99)00333-6
- Nir, A., 1991, "Heat Transfer and Friction Factor Correlations for Cross Flow Over Staggered Finned Tube Banks," Heat Transfer Engineering, Vol. 12, No. 1, pp. 43-58. https://doi.org/10.1080/01457639108939746
- Wang, C.-C., Webb, R. L. and Chi, K.-Y., 2000, "Data Reduction for Air-Side Performance of Fin-and-Tube Heat Exchangers," Exp. Thermal Fluid Sci., Vol. 21, pp. 218-226. https://doi.org/10.1016/S0894-1777(00)00005-4
- Hu, X. and Jacobi, A. M., 1993, "Local Heat Transfer Behavior and Its Impact on a Single-Row, Annularly Finned Tube Heat Exchanger," J. Heat Transfer, Vol. 115, pp. 66-74. https://doi.org/10.1115/1.2910671
- ASHRAE Standard 41.1, 1986, Standard Method for Temperature Measurement, ASHRAE.
- ASHRAE Standard 41.2, 1987, Standard Method for Laboratory Air-Flow Measurement, ASHRAE.
- ASHRAE Standard 41.5, 1975, Standard Measurement Guide, Engineering Analysis And Experimental Data.
- Taborek, J., 1998, "F and θ Charts for Cross- Flow Arrangements," Heat Transfer Enhancement of Heat Exchangers, edited by S. Kakac, A. E. Bergles, F. Mayinger and H. Yuncu, Kluwer Academic Press, pp. 141-162.
- Gnielinski, V., 1976, "New Equations for Heat and Mass Transfer in Turbulent Pipe Flows," Int. Chem. Eng., Vol. 16, pp. 359-368.
- Schmidt, T. E., 1949, "Heat Trasfer Calculations for Extended Surfaces," J. ASRE, Refrigeration Engineering, Vol. 4, pp. 351-357.
- Aziz, A., "Conduction Heat Transfer," Heat Transfer Handbook, edited by A. Bejan and A. D. Kraus, pp. 161-260.
- Torikoshi, K., Xi, G. N., Nakazawa, Y. and Asano, H., 1994, "Flow and Heat Transfer Performance of a Plate Fin and Tube Heat Exchanger (First Report: Effect of Fin Pitch)," Proceedings of the 10th Int. Heat Transfer Conf., Vol. 4, pp. 411-416.
- Nuntaphan, A., Kiatsiriroat, T. and Wang, C.-C., 2005, "Heat Transfer and Friction Characteristics of Crimpled Heat Exchangers with Dehumidification," Applied Thermal Engineering, Vol. 25, pp. 327-340. https://doi.org/10.1016/j.applthermaleng.2004.05.014
- Gianolio, E. and Cuti, F., 1981, "Heat Transfer Coefficients and Pressure Drops for Air Coolers Under Induced and Forced Draft," Heat Transfer Engineering, Vol. 3, No. 1, pp. 38-48. https://doi.org/10.1080/01457638108939573