Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지

Effect of Deposition Time on the Properties of TiN-coated Layer of SM45C Steel by Arc Ion Plating

AIP법에서 증착시간이 SM45C 강의 TiN 코팅층 성질에 미치는 영향

  • 김해지 (경남과학기술대학교 자동차공학과)
  • Received : 2011.03.05
  • Accepted : 2011.10.06
  • Published : 2011.10.31
Download PDF
⟨ Previous Next ⟩

Abstract

The effect of deposition time in arc ion plating on surface properties of the TiN-coated SM45C steel is presented in this paper. The surface roughness, micro-particle, micro-hardness, coated thickness, atomic distribution of TiN, and adhesion strength are measured for various deposition times. It has been shown that the deposition time has a considerable effect on the micro-hardness, the coated thickness, and the atomic distribution of TiN of the SM45C steels but that it has little influence on the surface roughness and adhesion strength.

Keywords

References

  1. E. Moll and E. Bergmann, "Hard coatings by plasma-assisted PVD technologies: Industrial practice", Int. J. Surface and Coatings Tech., Vol. 37, pp. 483-509, 1989. https://doi.org/10.1016/0257-8972(89)90085-6
  2. G. Hakansson, L. Hultman and J. E. SundgrenJ. E. GreeneW. D. Münz, "Microstructures of TiN films grown by various physical vapour deposition techniques", Int. J. Surface and Coatings Tech., Vol. 48, pp. 51-67, 1991. https://doi.org/10.1016/0257-8972(91)90128-J
  3. K. Akari, H. Tamagaki, T. Kumakiri, K. TsujiE. S. Koh and C. N. Tai, "Reduction in macroparticles during the deposition of TiN films prepared by arc ion plating", Int. J. Surface and Coatings Tech., Vol. 43-44, pp. 312-323, 1990. https://doi.org/10.1016/0257-8972(90)90084-P
  4. T. Matsue, T. Hanabusa and Y. Ikeuchi, "Dependence to processing conditions of structure in TiN films deposited by arc ion plating," Int. J. of Vacuum, Vol. 74, pp. 647-651, 2004. https://doi.org/10.1016/j.vacuum.2004.01.049
  5. S. W. Kim, "Consideration on the evaluation of adhesion force of thin film with rockwell and scratch tester", J. of the KSHT, Vol. 17, No. 6, pp. 365-369, 2004.
  6. G. H. Kang, H. Uchida and E. S. Koh, "A study on the surface structure of Ti cathode and the macroparticle of TiN films prepared by the arc ion plating process", Int. J. Surface and Coatings Tech., Vol. 86-87, pp. 421-424, 1996. https://doi.org/10.1016/S0257-8972(96)02980-5
  7. J.S. Kim, "Tendency of PVD coating technology onmetal cutting tools", J. of the KSPE, Vol. 18, No. 8, pp. 11-17, 2001.
  8. K. J. Yoon, S. J. Cho, S. S. Kim, M. S. Yoon and S. H. Yang, "Wear mechanism of TiN-coated high-speed steel during sliding", Int. J. Wear, Vol. 170, pp. 101-108, 1993. https://doi.org/10.1016/0043-1648(93)90356-Q