참고문헌
- Oh, M. S., Yoon, I. J. and Baek, D. K., "Study of the Thermal Deflection Error and the Deflection Error Induced by the Cutting Force", Journal of KSIA, Vol. 5, No. 4, pp. 373-378, 2002.
- Dornfeld, D., Lee, D. E., "Precision Manufacturing", Springer, 2007.
- Oh, S. H., "A Study on the Correlation between Machinability and the Cutting Condition in Machining Aluminum Alloy", Journal of KSMPE, Vol. 3, No. 4, pp. 56-62, 2004.
- Sim, G. J., Cheong, C. Y., Oh, S. H. and Seo, N. S., "A Study on the Classification and Prediction of the Chip Type under the Specified Cutting Condition in Turing", Journal of KSPE, Vol. 12, No. 8, pp. 53-62, 1995.
- Masuda, M., Torri, M., "The Influence of Cutting Force on Boundary Failure of Cutting Tool", Journal of JSPE, Vol. 53, No. 10, pp. 1596-1601, 1987.
- Levy, E. K., Tsai, C. L. and Groover, M. P., "Analytical Investigation of the Effect of Tool Wear on the Temperature Variations in a Metal Cutting Tool", Trans, ASME, Vol. 98, No. 1, pp. 251-257, 1976. https://doi.org/10.1115/1.3438828
- Shih, Albert J., "Finite Element Analysis of Orthogonal Metal Cutting Mechanics", International Journal of Machine Tools & Manufacture, Vol. 36, No. 2, pp. 255-273, 1996. https://doi.org/10.1016/0890-6955(95)98765-Y
- Kim, K. W. and Sin, H. C., "Development of a Thermo-Viscoplastic Cutting Model using Finite Element Method", International Journal of Machine Tools & Manufacture, Vol. 36, No. 3, pp. 379-397, 1996. https://doi.org/10.1016/0890-6955(95)00054-2
- Ng, E. G., Aspinwall, D. K., Brazil, D. and Monaghan, J., "Modelling of Temperature and Force When Orthogonally machining Hardened Steel", International Journal of Machine Tools & Manufacture, Vol. 39, No. 6, pp. 885-903, 1999. https://doi.org/10.1016/S0890-6955(98)00077-7
- Choi, T. K., Kim, J. S., Park, J. H. and Lim, H. J., "The Machinability Estimation Depending on Cutting Condition in Al6061-T6 Turning Operations", Journal of KSMTE, Vol. 18, No. 6, pp. 675-680, 2009.
- Lee, M. J., Hwang, Y. K. and Lee, C. M., "A study on the development of analysis model for prediction of relative deformation between cutting tool and workpiece", Journal of the KSPE, Vol. 27, No. 4, pp. 20-26, 2010.