DOI QR코드

DOI QR Code

무기질계 주입재의 강도발현 메커니즘

Strength Development Mechanism of Inorganic Injection Material

  • 한윤수 (한양대학교 대학원 건설환경공학과) ;
  • 이종휘 (한양대학교 대학원 건설환경공학과) ;
  • 강형남 ((주)지스코) ;
  • 백승인 (한양대학교 대학원 건설환경공학과) ;
  • 천병식 (한양대학교 공과대학 건설환경공학과)
  • 투고 : 2011.03.21
  • 심사 : 2011.09.06
  • 발행 : 2011.10.01

초록

최근 국내에서는 지반개량 재료로 무기질계 급결재와 초미립자 시멘트를 주원료로 하는 NDS(Natural and Durable Stabilizer)공법 등의 개발이 활발하게 연구되어 왔다. 하지만 기존의 연구에서는 NDS의 재령일별 강도발현 과정에 있어서의 화학적인 변화과정 및 강도발현의 원리를 설명해 주지는 못하고 있는 실정이었다. 따라서 무기질계 주입재의 대중화를 위해서는 경화과정의 메커니즘 규명이 확실하게 선행되어야 한다고 판단하였고, 일축압축시험, SEM분석, XRD분석을 재령일 별로 실시하여 각각의 결과값을 분석하였다. 또한 그 특징을 더욱 분명히 구별하기 위하여 물유리계 주입재의 대표적인 예인 SGR 또한 동일한 시험을 실시하여 비교대상으로 하였다. 시험결과 NDS의 강도발현 메커니즘을 일축압축강도-SEM-XRD의 유기적 상관성을 통해 도출할 수 있었고 그 성능의 우수함을 확인하였다.

Recently, NDS(Natural and Durable Stabilizer)method and other similar methods are composed of inorganic accelerating agent and the ultra-super fine cement have been studied as the ground improvement material in Korea. However, in the existing research, the chemical changing process of NDS in the strength development mechanism with the elapsed curing time and the principles of strength development did not give an explanation. For the popularization of the inorganic grout material, it determined that the mechanism verifying of the curing process had to be clearly preceded. Therefore, unconfined compression test, SEM and XRD analysis were performed by the elapsed curing time and were analyzed. In addition, the same trial for SGR method, that is the representative example of the water glass grout material, was selected as comparative target in order to distinguish properties of NDS more clearly. The result of experiment, the strength development mechanism of NDS could be investigated through the close correlation of the unconfined compression strength - SEM - XRD analysis, and excellence of a performance was confirmed.

키워드

참고문헌

  1. 강형남(2011), 다단분급기의 개발 및 지반개량효과 평가, 박사학위논문, 한양대학교. pp. 30-31.
  2. 기술표준원(2001), 흙의 일축압축시험방법, KS F 2314.
  3. 김진춘, 최영철, 정종주, 신상재, 윤남식(2001), 그라우팅기술동향과 MSG 공법의 특징, 한국지반공학회논문집, Vol. 17, No.3, pp. 40-49.
  4. 문경주(2006), 무기계 산업폐기물을 자극제로 이용한 비소성 시멘트의 수화반응, 한국콘크리트학회 논문집, Vol. 18, No. 2, pp. 269-270.
  5. 배승훈(2003), 팽창재의 조성에 따른 칼슘설포알루미네이트계 팽창시멘트의 수화특성, 석사학위논문, 단국대학교. p. 8.
  6. 천병식(2002), S.R.C 공법의 특성 및 현장 적용성에 관한 검토 연구, 연구보고서, 한양대학교, pp. 1-5.
  7. 천병식, 강형남, 도종남, 임주헌(2006), 환경 친화적인 무기질계 지반주입재의 내구성 및 차수효과에 관한 연구, 한국지반환경공학회논문집, Vol. 7, No. 6, pp. 113-119.
  8. 한양대학교(2011), NDS공법의 초미립자 시멘트를 사용한 친환경적이고 내구성이 뛰어난 무기질계 지반주입재의 적용성 연구, pp. 14-17.
  9. 千柄植(1998), 最新 地盤注入-理論과實際-, 圓技術, pp. 199-201, 169-170.
  10. 米倉 亨三, 島田 俊价, 木下 吉友(2000), 恒久グラウト注入工法, 山海堂, pp. 12-27, 103-114.
  11. Ann, K. Y., Song, H. W., Lee, C. H. and Lee, K. C.(2006), Build-up of Surface Chloride and Its Influence on Corrosion Initiation Time of Steel in Concrete, EASEC-10, The Tenth East Asia-Pacific Conference on Structural Engineering & Construction, Bangkok, August 3-5, pp. 767-772.
  12. Cohen, M. D.(1983), Modified Micromechanical Model, Cement Concrete Research, Vol. 13, p. 809. https://doi.org/10.1016/0008-8846(83)90082-0