DOI QR코드

DOI QR Code

Basic Study on the Characteristics of Wooden Sidewalk Pavement Material using Wood Waste Chip

폐목재 칩을 활용한 목질계 보도포장재의 특성에 대한 기초연구

  • 최재진 (국립공주대학교 건설환경공학부) ;
  • 송진우 (국립공주대학교 대학원 건설환경공학부)
  • Received : 2010.08.23
  • Accepted : 2011.03.21
  • Published : 2011.06.30

Abstract

An experiment was conducted to suggest the road pavement material combining wooden chip crushed from little useful roots and branches from logging sites or wood waste from construction sites with urethane resin. For the specimen, the mass ratio of urethane resin to construction wood waste chip/lumber waster chip was set to three different levels of 0.5, 0.75, and 1.0, which was measured, mixed with mixer, and molded; 7 days after, tensile strength test, elasticity test using golf balls and steel balls, permeability coefficient measurement, and flammability test were executed. As the result, the tensile strength of the specimen at the dry state in the air exhibited the range of 0.2-1.1MPa, and there was no change after 7 days of aging. When submerged in water, however, the strength was partially diminished; the diminishing rate was greater for less urethane resin usage, and therefore it appears desirable to set the mass ratio of resin to the wood waste chip over 0.75 to consider the moisture intrusion by precipitation and such. As the result of elasticity test, the GB and SB coefficients of the specimen using wood waste chips and urethane resin were measured to be low at below 20%, exhibiting excellent elasticity as road pavement material. Also, the permeability coefficient was over 0.5mm/sec for specimens of all combinations, exceeding the standard value required after construction for permeable pavement material, and the flammability of wood-type pavement material was evaluated to have no practical issues.

건설현장에서 나오는 폐목재 또는 활용가치가 낮은 벌목지에서 발생하는 나무뿌리와 가지 등의 임목폐기물을 분쇄한 목재 칩을 우레탄 수지로 결합시킨 보도용 포장재를 제안하기 위한 실험을 실시하였다. 시험체는 재료혼합비율로서 건설폐목재 칩 및 임목폐기물 칩에 대한 우레탄 수지의 질량비를 0.5, 0.75, 1.0의 3수준으로 정하고 재료 계량 후 믹서로 혼합, 성형한 다음 7일이 경과하였을 때 인장강도 시험, 골프공과 스틸볼을 이용한 탄력성 시험, 투수계수 측정 및 가연성 시험을 실시하였다. 실험결과 공기중 건조상태에서 시험체의 인장강도는 0.2~1.1MPa의 범위를 나타냈으며 재령 7일 이후의 강도 변화는 나타나지 않았다. 그러나 침수시켰을 때 강도가 저하되었으며 그 강도의 저하비율은 우레탄 수지의 사용량이 적을수록 크게 되므로 강우 등에 의한 수분 침투를 고려하여 폐목재 칩에 대한 수지의 질량비는 0.75 이상으로 하는 것이 바람직하다고 판단된다. 탄력성 시험결과로서 폐목재 칩과 우레탄 수지를 사용한 시험체의 GB계수와 SB계수는 20% 이하의 낮은 값으로 측정되어 보도용 포장재로서 우수한 특성을 나타냈다. 또한 투수계수는 모든 배합의 시험체에서 0.5mm/sec 이상으로, 투수성 포장재에 있어서 시공 후 요구되는 일반적인 투수계수의 기준값을 상회하였으며, 목질계 포장재의 가연성은 실용상 특별히 문제가 되지는 않을 것으로 판단되었다.

Keywords

References

  1. 김외정(2005) 폐목재 수집 및 건설산업의 활용과 전망, 한국건설순환자원학회지, 한국건설순환자원학회, Vol. 1, No. 1, pp. 47-51.
  2. 박준석, 김정대, 홍수열, 도인환, 배재근(2008) 국내 폐목재 발생량 예측 및 재활용 가치 추정, 한국폐기물학회지, 한국폐기물학회, 제25권 제4호, pp. 363-370.
  3. 산업자원부(2007) 목질계 바이오매스의 에너지 활용 방안 : 우드칩을 이용한 에너지 생산설비를 중심으로 : 최종보고서.
  4. 임업연구원(2000) 폐목재의 수집체계 개선 및 재활용 촉진방안, 임업연구원 연구원보, Vol. 159, p. 274.
  5. 久保光, 三田村文寬, 米村豊志, 小形信男(2007) 廢プラスチックと廢木材チップを利用した舖裝の性能評價, 土木學會第62回年次學術講演會, V-132.
  6. 久保光, 三田村文寬, 小形信男, 米村豊志(2008) リサイクル資源を利用した廢木材チップ舖裝の硏究開發(その4) 一廢プラスチックの添加が木質系舖裝材の物性に及ぼす影響-, 福井縣雪對策.建設技術硏究所年報, 제21호, pp. 66-73.
  7. 久保光, 米村豊志(2005) リサイクル資源を利用した廢木材チップ 舖裝の硏究開發, 福井縣雪對策.建設技術硏究所年報, 제18호, pp. 59-63.
  8. 福手勤(1998) 透水性による負荷低減, コンクリ一ト工學, Vol. 36, No. 3, pp. 16-18.
  9. 三浦裕二(1984) 透水性鋪裝と土壤生物, 鋪裝, Vol. 19, No. 2, pp. 18-20.
  10. 森田千尋 外 7人(2007a) 廢木材チップを利用した舖裝材の開發について, 土木構造.材料論文集, 제23호.
  11. 森田千尋, 大野博之(2007b) 廢木材の舖裝材としての基本性能に關する硏究一物理.化學的性質の觀点から, 環境情報科學論文集 21, pp. 631-636.
  12. 日本道路協會(1996) 鋪裝試驗法便覽別冊.
  13. Hidenobu Tokushige, Makoto Kawakami, Yasuji Kurimoto, Hidefumi Yamauchi and Takanobu Sasaki(2004) Porous Polymer Concrete Using Polyurethane Resin and Chipped Aggregates Made of Wood Wastes, RILEM International Symposium on Environment-Conscious Materials and Systems for Sustainable Development, September 6-7, Koriyama, Japan, pp. 321-328.
  14. Pascale Coatanlem, Raoul Jauberthie and Frank Rendell(2006) Lightweight Wood Chipping Concrete Durability, Construction and Building Materials 20, pp. 776-781. https://doi.org/10.1016/j.conbuildmat.2005.01.057