DOI QR코드

DOI QR Code

합성율과 벽체두께가 합성지하벽의 전단거동에 미치는 영향

The Effect of Composite Ratio and Wall Thickness on the Shear Behavior of Composite Basement Wall

  • 투고 : 2009.10.12
  • 심사 : 2009.12.17
  • 발행 : 2010.01.30

초록

도심지의 제한된 공간에서 대형 건축 지하구조물을 축조하기 위한 지하 굴토공사는 주변지반의 안정이 최우선 되어야 하며, 이를 위해서 흙막이 공사가 필수적으로 검토되어야 한다. 가설 흙막이 구조에서 응력부담재로 주로 사용되고 있는 H-Pile은 주열식 흙막이 벽체에서 지하외벽의 시공 이후에는 방치되므로 재료의 낭비를 초래하게 된다. 이를 개선하기 위하여 가설재인 H-Pile과 지하벽을 합성한 합성지하벽 공법이 개발되어 현재 많은 국내의 현장에 활용되고 있다. 본 연구에서는 지하합성벽의 전단내력을 평가하기 위하여 총 5개의 실험체를 제작하였다. 실험변수로는 전단연결재에 따른 합성율과 벽체 두께를 변수로 하여 실험을 실시하였으며, 기준식에서 제시하는 콘크리트 전단강도와 H-Pile의 전단강도를 실험값과 비교 분석하였다. 실험결과 합성율이 증가함에 따라 전단강도는 상승하지만 그 차이는 크지 않은 것으로 나타났다. 합성지하벽의 전단강도 산정시, 콘크리트 강재의 웨브 뿐만아니라, 강재플랜지의 기여도를 고려한 새로운 식을 제시하고 이를 이용한 계산결과와 실험결과를 비교한 결과 좋은 대응을 보이는 것으로 나타났다.

When doing underground excavation works for the purpose of constructing large underground structures for a building in the limited space in downtown area, the stability of the adjacent ground must be top priority, and to accomplish this, it is essential to review the retaining wall construction carefully. H-Pile, which has been mainly used as a stress-carrying material in temporary earth-retaining structures, is most likely to be abandoned after completion of the works for the basement exterior wall in relation to contiguous bored piles, so it will result in a waste of material. To improve this situation, Basement Composite Wall where H-Pile and basement wall are compounded, has been developed. This wall is being used most frequently in many local construction sites. In this study, five specimens are made in order to evaluate the shear resistance of the basement composite wall and tested. Test parameter is the composition ratio and wall thickness according to shear connectors. Test result shows that the shear strength is improved when the composite ratio is increased but the magnitude is not much. A formula, which considers the contribution of concrete, web of H-pile as well as flange' effect in calculation of shear strength of composite basement wall, is suggested and used to calculation of the strength of specimens. It is found that there is a good co-relation between test result and the calculated one by the formula.

키워드

참고문헌

  1. 서수연, 김재엽, 하기주, 무지주 지하옹벽 거푸집 시공시의 압축지지대, 특허 제10-0728207호
  2. 이성호, 역T형 합성 지하벽의 구조적 거동에 관한 실험적 연구, 한양대학교 박사학위논문, 2002.
  3. 초대형 구조 시스템 연구 센터, 삼성중공업(주), "CBS 공법의 개발 및 성능 평가에 관한 연구", 2001.
  4. AISC Committee on the Code of Standard Practice, Code of Standard Practice for Steel Buildings and Bridges, ASIC 360-05, American Institute of Steel Construction, Inc., Chicago, IL, 2005
  5. ACI Committee 318, Building Code Requirements for Structural Concrete(ACI318-08) and Commentary (AC I318R-08), ACI, 2008
  6. Bazant, Zdenek P., and Kim, Jin-Keun, "Size Effect in Shear Failure of Longitudinally Reinforced Beams", ACI Journal, Proceedings V. 81, No. 5, Sept.-Oct., 1984.
  7. JSCE, "Standard Specification for Design and Construction of Concrete Structures", Part I(Design), Japan Society of Civil Engineers, Tokyo, 1991.
  8. R. Park, "Evaluation of Ductility of Structures and Structural Assemblages from Laboratory Testing," Bulletin of The New Zealand National Society for Earthquake Engineering, Vol. 22, No. 3, September, 1989.
  9. Zsutty, Theodore C, "Beam Shear Strength Prediction by Analysis of Existing Data", ACI Journal, Proceedings V. 65, No. 11, Nov., 1968.

피인용 문헌

  1. 전단경간비에 따른 합성지하벽의 거동과 접촉면의 조건을 고려한 유한요소 해석 vol.15, pp.6, 2010, https://doi.org/10.11112/jksmi.2011.15.6.118