DOI QR코드

DOI QR Code

발전소 온배수를 이용한 1MW급 폐쇄형 해양온도차발전 성능해석

Analysis of 1MW Closed OTEC Cycle Using Thermal Effluent and Waste Heat

  • 김현주 (한국해양연구원 해양심층수연구센터) ;
  • 이호생 (한국해양연구원 해양심층수연구센터) ;
  • 정동호 (한국해양연구원 해양심층수연구센터) ;
  • 문덕수 (한국해양연구원 해양심층수연구센터)
  • 투고 : 2010.04.07
  • 심사 : 2010.05.18
  • 발행 : 2010.05.31

초록

발전소 온배수 및 폐열을 이용한 1 MW급 폐쇄형 해양온도차발전 사이클에 대한 성능을 비교 분석하였다. 폐쇄형 해양온도차발전 사이클에 대한 열역학적 모델은 랭킨 사이클이고, 기화기 증발 열원으로 발전소 온배수를 이용하여 사이클 효율, 기화기 및 응축기 열량 등 사이클 성능을 비교 분석하였다. 발전소 온배수 온도가 증가함에 따라 기화기 내 증발 포화압력은 상승하게 되고 그로 인해 사이클 효율은 증가하였고, 총 출력 1 MW에 필요한 기화기 및 응축기 용량은 감소하였다. 따라서 발전소 온배수는 폐쇄형 해양온도차발전에서 주요한 열원으로 사용될 수 있음을 알 수 있었다. 또한, 주위 이용 가능한 폐열이 있을 때 기화기 출구 작동유체와 열교환시켜 터빈으로 유입되는 작동유체의 온도를 상승시킨다면 사이클 효율은 크게 증가할 것이다.

The thermodynamic performance of closed ocean thermal energy conversion (OTEC) cycle with 1 MW gross power was evaluated to obtain the basic data for the optimal design of OTEC. The basic thermodynamic model for OTEC is Rankine cycle and the thermal effluent from power plant was used for the heat source of evaporator. The cycle performance such as efficiency, heat exchanger capacity, etc. was analyzed on the temperature variation of thermal effluent. The saturated pressure of evaporator increased with respect to the increase of thermal effluent temperature, so the cycle efficiency increased and necessary capacity of evaporator and condenser decreased under 1 MW gross power. As the thermal effluent temperature increases about $15^{\circ}C$, the cycle efficiency increased approximately 44%. So, it was revealed that thermal effluent from power plant is important heat source for OTEC plant. Also, if there is an available waste heat, it can be transferred heat to the working fluid form the evaporator through heat exchanger and cycle efficiency will be increased.

키워드

참고문헌

  1. A. D'Arsonal, "Utilisation de forces naturelles, Revue Scientifique", vol. 17, pp. 370-372, 1881.
  2. G. Claude, "Power from the tropical seas", Mechanical Engineering, vol. 52, no. 12, pp. 1039-1044, 1990.
  3. 김광우, "해양온도차 발전 시스템의 소개", 대한설비공학회지, 제30권, 제1호, pp. 18-25, 2001.
  4. 홍기용, 현범수, "해양에너지 기술현황과 전망", 설비저널, 제39권, 제1호, pp. 13-20, 2010.
  5. H. Uehara, "The experimental research on ocean thermal energy conversion using the Uehara cycle", proceedings of the International OTEC/DOWA Conference, pp. 132-141, 1999.
  6. Korea Power Company, A Study on the Development of Ocean Thermal Energy conversion and Wave Power Generation System, Technical report, KRC-89G-T10, 1989.
  7. 이호생, 김현주, 윤정인, "해양 심층수를 이용한 냉난방 히트펌프 시스템", 한국마린엔지니어링학회, 제34권, 제1호, pp. 21-25, 2010.
  8. 엄지홍, 이재용, 김남진, 김종보, "20 kW급 해양온도차 파이롯 플랜트 성능실험", 대한설비공학회, 제13권, 제10호, pp. 1002-1009, 2001.
  9. L. A. Vega, "Ocean thermal energy conversion", Encyclopedia of Energy Technology and the Environment, pp. 2104-2119, 1995.

피인용 문헌

  1. Performance Analysis of Closed-type OTEC Cycle using Waste Heat vol.25, pp.1, 2011, https://doi.org/10.5574/KSOE.2011.25.1.080
  2. A Study on the Improvement for Cycle Efficiency of Closed-type OTEC vol.35, pp.1, 2011, https://doi.org/10.5916/jkosme.2011.35.1.046
  3. Performance Comparison of R134a Organic Rankine Cycle (ORC) Using Hot Wastewater and Surface Seawater vol.36, pp.6, 2012, https://doi.org/10.5916/jkosme.2012.36.6.768
  4. Basic performance analysis of ocean thermal energy conversion using the refrigerant mixture R32/R152a vol.38, pp.4, 2014, https://doi.org/10.5916/jkosme.2014.38.4.502
  5. 화력발전소 폐열에 따른 작동유체별 액-증기 이젝터를 적용한 1MW급 ORC의 성능 분석 vol.18, pp.6, 2010, https://doi.org/10.9726/kspse.2014.18.6.120
  6. Dynamic Simulation of Performance Change of MW-class OTEC according to Seawater Flow Rate vol.23, pp.1, 2010, https://doi.org/10.9726/kspse.2019.23.1.048