참고문헌
- Ha, S. B., Choi, W. and Lee, J. C., "A study on the Surface Roughness & Bending Strength for Zirconia Ceramic Grinding," J. of the KSPE, Vol. 17, No. 5, pp. 131-136, 2000.
- Ueda, K., "Application of Fracture Mechanics in Micro-cutting of Engineering Ceramics," Annals of the CIRP, Vol. 32, No. 1, pp. 83-88, 1983. https://doi.org/10.1016/S0007-8506(07)63366-6
- Nakai, T., "Machining of Ceramics," Kogyo-Jairyo, Vol. 32, No. 12, pp. 34-42, 1978.
- Iijima, N. and Takeyama, H., "Study on Machining Performance of Sintered Diamond Tool and Its Wear Mechanism (1st Report)-Mechano-physical Wear Mechanism of Sintered Diamond Tool," Journal of JSPE, Vol. 50, No. 7, pp. 1100-1107, 1984.
- Watanabe, M. and Yoshikawa, M., "Cutting of Ceramic Materials by Diamond Coated Cutting Tools," Journal of JSPE, Vol. 56, No. 9, pp. 1735-1740, 1990.
- Kitagawa. T., Kubo, A. and Maekawa, K., "Plasma Hot Machining for Difficult-to-cut Materials (3rd Report)-Application to Glasses and Engineering Ceramics," J. the Ceramic Society of Japan, Vol. 55, No. 6, pp. 1059-1065, 1989.
- Uehara, K. and Takeshita, H., "Cutting Ceramics with a Technical of Hot Machining," Annals of the CIRP, Vol. 35, No. 1, pp. 55-58, 1986. https://doi.org/10.1016/S0007-8506(07)61837-X
- Akasawa, T., Takeshita, H. and Uehara, K., "Hot Machining of Ceramics," Annals of the CIRP, Vol. 36, No. 1, pp. 37-40, 1987. https://doi.org/10.1016/S0007-8506(07)62548-7
- Koenig, W. and Wagemann, A., "Machining of Ceramic Components: Process-Technological Potentials," NIST Spec. Publ. No. 847, pp. 3-20, 1993.
- Wang, Z. Y., Rajurkar, K. P. and Murugappan, M., "Cryogenic PCBN Turning of Ceramics," Wear, Vol. 195, No. 1-2, pp. 1-6, 1996. https://doi.org/10.1016/0043-1648(95)06645-4
- Halcomb, D. L. and Rey, M. C., "Ceramic Cutting Tools for Machining Unsintered Compacts of Oxide Ceramics," Ceramics Bulletin, Vol. 61, No. 12, pp. 1311-1314, 1982.
- Lee, J. W., "Tool Wear in Turning of the Presintered Low Purity Alumina," J. of the KSPE, Vol. 22, No. 1, pp. 39-46, 2005.
- Lee, J. W., "Evaluation of Wet Machining Characteristics of the Presintered Low Purity Alumina with the Ceramic, CBN and Diamond Tools," J. of the KSPE, Vol. 24, No. 2, pp. 33-40, 2007.