참고문헌
- Slocum, A. H., "Precision machine design," Prentice-Hall, pp. 58-113, 1992.
- Evans, C. J. and Hocken, R. J., "Self-calibration: reversal, redundancy, error separation and absolute testing," CIRP Annals -Manufacturing Technology, Vol. 45, No. 2, pp. 617-634, 1996. https://doi.org/10.1016/S0007-8506(07)60515-0
- Hocken, R. J. and Borchardt, B. R., "On characterizing measuring machine geometry," National Bureau of Standards Information Report, NBSIR 79-1752, 1979.
- Lieberman, B., "Quality assurance procedures for MEBES," J. Vac. Sci. Technol., Vol. 15, No. 3, pp. 913-916, 1978. https://doi.org/10.1116/1.569627
- Raugh, M. R., "Absolute 2-D sub-micron metrology for electron beam lithography," Proc. of SPIE, Vol. 480, pp. 145-162, 1984.
- Raugh, M. R., "Absolute two-dimensional submicron metrology for electron beam lithography: a calibration theory with application," Precision Engineering, Vol. 7, No. 1, pp. 3-13, 1985. https://doi.org/10.1016/0141-6359(85)90072-8
- Takac, M. T., "Self-calibration in one dimension," Proc. of SPIE, Vol. 2087, pp. 80-86, 1993.
- Ye, J., Takac, M. and Berglund, C. N., "An exact algorithm for self-calibration of two-dimensional precision metrology stages," Precision Engineering, Vol. 20, No. 1, pp. 16-32, 1997. https://doi.org/10.1016/S0141-6359(97)00005-6
- Hume, K. J., "Metrology with autocollimators,"Hilger & Watts, Lts., 1965.
- Ruijl, T., "Ultra Precision Coordinate Measuring Machine; Design, Calibration and Error. Compensation," Ph. D. Thesis, Mechanical Engineering, Delft University of Technology, 2001.
- Renishaw, http://www.renishaw.com/
- ACS, http://www.acsmotioncontrol.com/
- Lion, http://www.lionprecision.com/
- Obishi, http://www.obishi.co.jp/
- Park, S.-H. Kim, D., Kim, K. H. and Jang, S., "Calibration of the straightness and orthogonality of a laser feedback stage system using self-calibration method," Proc. of ICPT, pp. 173-178, 2008.