유구 전사 및 토층 전사 전용 우레탄 수지의 합성과 그 적용에 관한 연구

The Study on the Synthesis of Urethane Polymer and Their Application for the Exclusive Use of Soil Layer Transcription and the 1st Transcript of Historical Site

  • 한원식 (한서대학교 문화재보존과학연구센터) ;
  • 위광철 (한서대학교 문화재보존과학연구센터)
  • Han, Won-Sik (The Research Center of Conservation Science for Cultural Heritage, Hanseo University) ;
  • Wi, Koang-Chul (The Research Center of Conservation Science for Cultural Heritage, Hanseo University)
  • 투고 : 2010.08.05
  • 심사 : 2010.08.24
  • 발행 : 2010.09.20

초록

유구 전사용으로 수입되어 사용되는 우레탄 수지 NS-10을 대체하기 위하여 1 차 유구 전사용과 토층 전사용 우레탄 수지를 합성하였다. 합성된 우레탄 수지는 NS-10과 비교하여 볼 때, 수분을 함유하는 토양에서 같은 침투력을 갖고 있으며, 유구 전사 시, 최종생성물인 에폭시 표면과 우레탄 pre-polymer 층의 박리에도 안정한 도막층을 형성하였다. 1 차 유구 전사용으로 사용될 우레탄은 NS-10과 같이 강한 인장 강도를 부여하고자 했으며, 토층 전사용 우레탄의 경우에는 역시 NS-10과 같은 인장 강도를 가지되 NS-10보다 경질성을 증가시켰다. 이 경질성의 증가로 인하여 토층 전사 후에도 토층 전사체 후면의 작업을 최소화할 수 있는 장점을 갖게 되었다. 최종적으로 합성된 우레탄 수지들을 실험실에서 제작한 압착 토양과 실제 유구와 유사한 토양에 직접 적용하여 본 결과, 기존에 사용하였던 NS-10과 비교하여 만족스런 침투력과 안정성을 가지고 있는 전사체를 형성함을 보여 작업자에게 편의성을 주는 우수한 전사용 수지였다.

Urethane resin applicable for the first transcription of historical site and transcription of soil layer were synthesized in order to replace the imported urethane resin, NS-10. Comparing to the NS-10, the urethane polymers showed similar penetration to wet soil and formed a stable layer of polyurethane during progress working the peeling off the polyurethane pre-product from epoxy surface of final product. The urethane resins used for the first transcription of historical site improved tensile strength, which is consistent with that of NS-10. In addition the urethane resin for transcription of soil layer was supplied with hardness that have a also same strong point as like NS-10. This property is advantage due to simplifying the transcription work of soil layer in backward. When we tested to the real ground soil as well as experimentation compressed soil with use these synthesis urethane resin, we ca get the satisfying result in penetration property and stability and these properties evaluated the resins as an advanced product serving better convenience for worker.

키워드

참고문헌

  1. 정문교, "문화재행정과 정책". 지식산업사, p221-222, (2000).
  2. (사)한국문화재조사연구기관협회, "발굴 보존 유적 실태조사 자료집 I". p1, (2008).
  3. 박철원, "발굴유구 보존처리 및 이전. 복원에 관한 연구 -가마(窯址)를 중심으로-". 목포대학교 석사학위논문, (2002).
  4. 박성우, "토기 가마의 이전 방법에 대한 연구". 공주대학교 석사학위논문, (2008).
  5. 안진환, "발굴유구 보존에 대한 연구". 영남대학교대학원 석사학위논문, (2008).
  6. 서정호, "문화재를 위한 보존 방법론". 경인문화사, p381-412, (2008).
  7. 京都造形藝術大學, "保存科學入門". 角川書店, p295-296, (2002).
  8. 한원식, 홍태기, 임성진, 위광철, "유구 이전복원을 위한 표면 박리형 Epoxy polymer의 개발". 보존과학회지, 22, p77-86, (2008).
  9. 한원식, 홍태기, 박기정, 임성진, 위광철, "유구 이전 전용 저점도형 에폭시와 박리제에 관한 연구". 보존과학회지, 24, p37-42, (2007).
  10. 한원식, 홍태기, 임성진, 위광철, "자기분산형 수용성 에폭시를 이용한 유구 이전용 박리제의 개발". 보존과학회지, 25, p171-178, (2009).