DOI QR코드

DOI QR Code

Non-explosive separation device using screw jack mechanism

나사잭 메커니즘을 이용한 비폭발식 분리장치

  • 박현준 (한국항공대학교 기계공학과 대학원) ;
  • 이민수 (한국항공대학교 기계공학과 대학원) ;
  • 조재욱 (한국항공대학교 기계공학과 대학원) ;
  • 김병규 (한국항공대학교 기계공학과)
  • Published : 2010.04.01

Abstract

The non-explosive release device using jack mechanism is designed and fabricated for the small satellite. As a triggering actuator for the release device, a piezo rotory motor with torque of more than $1.7kgf{\cdot}cm$ is employed to guarantee stable activation. For performance tests of separation device, we conducted release time test, preload test and shock test. The device was operated within 1.172sec and activated stably under load of 45kgf. Maximum shock was measured as 18G that is much less than the pyro-separation device produces. We confirmed the possibility as a satellite separation device through above presented tests.

본 논문에서는 나사잭의 메커니즘을 이용한 인공위성의 비폭발식 분리장치를 설계 및 제작하였다. 분리장치의 구동기로는 정격토크가 $1.7kgf{\cdot}cm$의 성능을 가진 회전형 피에조 모터를 사용하여 분리장치의 안정적인 작동이 이뤄지도록 하였다. 또한 인공위성의 분리장치로의 성능을 검증하기 위하여 반응속도 실험, 준정적 하중실험, 충격실험을 수행하였다. 실험을 수행한 결과, 반응속도는 약 1.172초로 측정되었고, 45kgf의 하중에서도 안정적으로 견딜 수 있음을 확인하였다. 최대 충격 가속도는 18G가 측정이 되었는데 이것은 폭발식 분리장치에 비해 매우 작은 값이다. 우리는 이러한 실험을 통하여 제안한 분리장치의 신뢰성을 확인하였으며, 인공위성 분리장치로써의 가능성을 제시하였다.

Keywords

References

  1. Andrew Peffer, “Development and Transition of Low-Shock Spacecraft Devices for Small Satellite", 14th Annual/USU Conference on Small Satellites
  2. www.tiniaerospace.com
  3. www.spacedev.com
  4. Kei Miyamoto, Kyochi Ui, Naoki Miyashita, Masafumi Iai, Takeshi Usuda, Saburo Matunaga, "Tokyo tech separationdemonstraion tsd as m-v roket sub-payload for nanosatellite separation mechanism", IAC-05-B.6.A
  5. 장영근, 이병훈, "소형인공위성 시장의 현황과 전망“, 한국항공우주학회지, 춘계학술발표회논문집, 2008 pp. 1101~1105
  6. 박현준, 탁원준, 한범구, 곽동기, 황재혁, 김병규, “소형 위성용 비 폭발식 저 충격 분리장치”, 한국항공우주학회지 2009, pp. 457~463.
  7. www.piezo-tech.com/
  8. Jens Muller, Chiristoph Zauner, "Low shock release unit-easy resettable and 100% reusable", Proceedings of the 10th European Space Mechanisms and Tribology Symposium, 24~26 September 2003.