• Title/Summary/Keyword: 리드 스크류

Search Result 7, Processing Time 0.029 seconds

Screw Vacuum Pump의 Screw 리드의 변화에 따른 성능평가 연구

  • Gang, Sang-Baek;No, Yeong-Ho;Yu, Jae-Gyeong
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2014.02a
    • /
    • pp.153-153
    • /
    • 2014
  • 건식 진공펌프(dry vacuum pump)는 기계적 저진공펌프 중 펌프 내부의 기체 배기통로에 오일을 전혀 사용하지 않는 펌프의 통칭으로써, 대개 비접촉형으로 여러 형태의 회전자가 고속으로 회전하면서 흡기구로부터 들어온 기체를 압축해 배기를 한다. 비접촉형에는 루츠(roots)형, 클로(claw)형, 스크류(screw)형, 스크롤(scroll)형 등이 있다. 그 중 스크류형 펌프는 큰 배기속도를 갖는 펌프의 설계에 유리하고 높은 운용온도가 가능하여 다수공정에 쉽게 적용할 수 있는 장점이 있다. 그러나 1단 펌프 구성을 갖게 됨에 따라 루츠형 대비 높은 소비전력 특성을 보이는 약점을 가지고 있다. 본 논문에서는 건식 진공펌프 중의 하나인 스크류형 진공펌프에 대하여, 기본적인 1단 펌프 구성에 스크류 리드(lead)의 변화를 주어 기존의 똑같은 리드의 스크류 진공펌프에 대한 소비전력 및 배기구 온도 등 스크류 형상에 대한 성능평가 연구를 진행 하고자 한다.

  • PDF

플라즈마 연질화 처리된 마이크로 구동 요소부품의 표면미세구조 변화

  • Lee, Sang-Min;An, Gyeong-Jun
    • Proceedings of the Korean Institute of Surface Engineering Conference
    • /
    • 2013.05a
    • /
    • pp.125-125
    • /
    • 2013
  • 기계부품 및 자동차부품 등의 내마모나 내피로성의 향상을 위한 표면처리로서 고주파처리, 침탄처리, 질화처리 등이 사용되고 있다. 최근에는 변형을 최소화 함으로써 후가공을 생략할 수 있는 질화처리가 주목받고 있다. 질화처리종류로는 염욕질화나 가스질화법이 사용되고 있으나, 이들에 비해 환경오염 및 공해가 적고 인체에 무해한 플라즈마 연질화법이 사용되고 있다. 플라즈마 연질화 기술은 IT기기의 제품에 적용되는 표면경화의 공정개발은 미비한 실정이다. 마이크로 구동 요소 부품중의 하나인 Leadscrew는 이송장치를 구성하는 핵심 부품으로 IT기기의 정밀 이송 및 구동제어에 사용되는 핵심 부품으로 사용되고 있으며, 리드스크류의 소재인 SWCH1018A(냉간압조용강선)은 표면 경도가 낮고 변형이 쉽기 때문에 표면 경화를 위한 플라즈마 연질화 기술을 이용하고자 했다. 본 연구는 플라즈마 연질화 공정을 적용한 시편의 표면경도를 높혀주고 변형을 최소화 할 수 있는 공정을 확인하는 것이다. 공정변수를 변화 시키면서 얻어진 시편의 표면미세 구조를 미소경도측정, XRD, SEM분석을 통하여 확인하였으며, 이를 통해 시편 표면경도를 높여주는 공정 조건을 도출하였다.

  • PDF

Tilting Effect of Automotive Seat System on Squeak Noise (자동차 시트 틸팅 각도에 따른 기어박스 마찰소음 영향도)

  • Kang, Jae-Young
    • Transactions of the Korean Society for Noise and Vibration Engineering
    • /
    • v.20 no.6
    • /
    • pp.577-582
    • /
    • 2010
  • The squeak propensity in the gear box of an automotive seat system is investigated analytically. The mating parts in the gear box are the lead screw and the nut, where the friction stresses are exerted on the thread of the screw. The lead screw is modeled as a circular beam allowing the bending and torsional vibrations. In the system, the lead screw converts rotating to translating motion so that it moves the automotive seat slightly tilted on the floor. The tilting angle is considered one major parameter in this study. Therefore, the equations of motion associated with the non-conservative friction force are derived with the inclusion of the tilting angle. It is found that the squeak noise corresponds to the several bending modes of the lead screw and its propensity is increased by the tilting angle of the seat.

The Characteristics of High Speed Feed Drive System using High Lean Screw (High Lead Ball Screw를 사용한 고속이송계의 특성)

  • 고해주;박성호;정윤교
    • Transactions of the Korean Society of Machine Tool Engineers
    • /
    • v.10 no.4
    • /
    • pp.97-103
    • /
    • 2001
  • The study on the high-speed machine tool is very important for the improvement of productivity since it can shortens cutting and non-cutting time. Especially, high speed of feed drive system is the major research field. In the industries of the advanced countries, the feed drive systems at the speed of 60 m/min have been already developed based on the high lead ball screws. In this study, a high speed feed drive system at the speed of 60 m/ min has been developed, and its movements characteris-tics are investigated. As the movement characteristics, positioning accuracy, angular accuracy, straightness and micro step-response are measured. Thermal characteristics of the system is also discussed. For measuring the movement characteris-tics, a laser interferometer, a memory-based Hi-coder and a cooling device are used. The experimental results confirm that the movement characteristics and the thermal behavior of the system are satisfactory in the aspect of accuracy and stability.

  • PDF

플라즈마 연질화에 따른 마이크로 구동부품의 기계적 특성과 내식성에 관한 연구

  • Kim, Gang-Sam;Lee, Sang-Min;An, Gyeong-Jun
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2013.02a
    • /
    • pp.300-300
    • /
    • 2013
  • 세계전자제품의 부품산업은 21세기 정보화 사회와 함께 IT 산업에서 급성장으로 인해 부품의 소형화, 경량화, 친환경화가 요구되고 있다. IT 산업에서 리드스크류(Leadsrew)는 마이크로 구동부품중의 이송장치를 구성하는 핵심 부품으로 탄소강과 합금강 및 스테인레스강 등이 사용되고 있다. 탄소강은 성형 가공성과 원가 절감에 최적의 소재로서 낮은 표면 경도로 인한 내마모성 저하와 부식 분위기에서의 내식성이 떨어지는 단점을 가지고 있다. 본 연구에서는 탄소강(S20C:${\oint}30{\times}h10$)을 이용하여 플라즈마 질화 표면처리를 통해 표면경도와 내마모성 향상 및 내식성을 높이는 연구를 수행하였다. 연구 방법으로 플라즈마 연질화 공정과 Post Oxidation 공정을 개발하였고, 질화 처리된 시험편에 대해 마이크로 비커스 경도, OEM&SEM, XRD 분석 및 염수분무(KS D 9502) 시험으로 특성을 분석하였다. 연구 결과로 탄소강(S20C)은 마이크로 비커스 경도 분석으로 표면 경도가 600Hv0.025 이상과 염수분무 시험으로 내식성은 24시간 이상의 결과를 얻었다.

  • PDF

Theoretical Velocity Analysis of Micro Robot Based on Crawling Locomotive Mechanism for Pipe Inspection Micro Robot (Crawling 방식을 이용한 관 탐사용 소형 로봇의 이동속도 해석)

  • Jang, Ki-Hyun;Park, Hyun-Jun;Kim, Byung-Kyu
    • Transactions of the Korean Society of Mechanical Engineers A
    • /
    • v.32 no.8
    • /
    • pp.633-641
    • /
    • 2008
  • Recently, the necessity for diagnosis and management of pipes has emerged as the issue due to contamination of water supply generated by corrosion of pipes. Although inspection has been performed with industrial endoscopes, the method has limits for full diagnosis of pipes due to the lack of working range. As a solution for this problem, many locomotive mechanisms for a micro robot with endoscope functions were proposed. In this paper, we analyze the locomotive mechanism of crawling robot proposed as locomotive device for pipe inspection. Based on a mechanical modeling of motor and micro robot inside small pipe, the theoretical formula for velocity is obtained. This derived theoretical formula is demonstrated the feasibility through the comparison with experimental result. Also, we could find the most important element influencing the moving velocity of micro robot when the robot operates in small pipe. Consequently, it is expected that this study can supply useful information to design of crawling robot to move in small pipe.

Non-explosive separation device using screw jack mechanism (나사잭 메커니즘을 이용한 비폭발식 분리장치)

  • Park, Hyun-Jun;Lee, Min-Su;Jo, Jae-Wook;Kim, Byung-Kyu
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.38 no.4
    • /
    • pp.321-326
    • /
    • 2010
  • The non-explosive release device using jack mechanism is designed and fabricated for the small satellite. As a triggering actuator for the release device, a piezo rotory motor with torque of more than $1.7kgf{\cdot}cm$ is employed to guarantee stable activation. For performance tests of separation device, we conducted release time test, preload test and shock test. The device was operated within 1.172sec and activated stably under load of 45kgf. Maximum shock was measured as 18G that is much less than the pyro-separation device produces. We confirmed the possibility as a satellite separation device through above presented tests.