한국정밀공학회지 (Journal of the Korean Society for Precision Engineering)

  • 제27권1호
  • /
  • Pages.113-118
  • /
  • 2010
  • /
  • 1225-9071(pISSN)
  • /
  • 2287-8769(eISSN)
한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지

라만 분광법을 이용한 잔류응력 측정에 관한 연구

A Study on Residual Stress Measurement Using Raman Spectroscopy

  • 강민성 (성균관대학교 기계공학부 일반대학원) ;
  • 김상영 (성균관대학교 기계공학부 일반대학원) ;
  • 박수 (성균관대학교 기계공학부 일반대학원) ;
  • 구재민 (성균관대학교 기계공학부) ;
  • 석창성 (성균관대학교 기계공학부)
  • Kang, Min-Sung (Department of Mechanical Engineering, Sungkyunkwan Univ.) ;
  • Kim, Sang-Young (Department of Mechanical Engineering, Sungkyunkwan Univ.) ;
  • Park, Soo (Department of Mechanical Engineering, Sungkyunkwan Univ.) ;
  • Koo, Jae-Mean (Department of Mechanical Engineering, Sungkyunkwan Univ.) ;
  • Seok, Chang-Sung (Department of Mechanical Engineering, Sungkyunkwan Univ.)
  • 발행 : 2010.01.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

A straight pipe is used after complicated bending work in a mechanical system. In this work process, the plastic deformation of the pipe produces residual stress in the pipe. This residual stress significantly affects the behavior of pipe fracture. For this reason, residual stress must be evaluated. Measuring the residual stress of a U-shaped pipe is difficult with existing destructive and nondestructive measurement methods. In this paper, the residual stress of a U-shaped aluminum pipe (99.7% pure aluminum) was evaluated from the Raman shift by Raman spectroscopy and FEM(Finite Element Method, FEM) analysis. The results of the stiffness test by FEM analysis are compared with those by experiments. The analyzed results of the Raman spectra showed a similar tendency with the results of the FEM analysis with respect to the residual stress distributions in U-shaped pipes. Also, the results of the bending tests showed resemblance to each other.

키워드

참고문헌

  1. Kim, S. Y., Koo, J. M. and Seok, C. S., "Evaluation of residual stress of copper pipe by using raman spectroscopy," Modern Physics Letters B, Vol. 22, No. 11, pp. 1007-1012, 2008. https://doi.org/10.1142/S0217984908015759
  2. Kim, S. Y., Kim, H. I., Seok, C. S., Lee, J. K., Mo, J. Y. and Park, D. Y., "Evaluation of Tensile Properties and Bending-induced Residual Stress of Slender Copper Pipe," Key Engineering Materials, Vol. 321-323, pp. 636-639, 2006.
  3. Kim, S. Y., Lee, J. K., Mo, J. Y., Koo, J. M. and Seok, C. S., "Evaluation of Residual Stress in the U-shaped Aluminum Pipe," Proc. of KSME Autumn Conference, pp. 1-6, 2006.
  4. Jeon, S. G., Kim, J. H., Shin, J. Y. and Lee, S. G., "A Study on Improvements of Residual Stress of Pipe Bending By X-ray Diffractometer Test," Proc. of KSAE Autumn Conference, Vol. III, pp. 1111-1116, 2004.
  5. Yoo, K. B. and Kim, J. H., "Residual Stress Evaluation and Fatigue Life Prediction in the Welded Joint by X-ray Diffraction," Proc. of KSME Spring Annual Meeting, pp. 68-73, 2009.
  6. ASTM E1683-02, "Standard Practice for Testing the Performance of Scanning Raman Spectrometers" Annual Book of ASTM Standard, pp. 1-6, 2002.
  7. MSC. Software Corp., MSC.Marc and MSC.Marc Mentat.