참고문헌
- Malguarnera, S. C. and Manisali, A., "The effects of processing parameters on the tensile properties of weld lines in injection molded thermoplastics," Polym. Eng. Sci., Vol. 21, No. 10, pp. 586-593, 1981. https://doi.org/10.1002/pen.760211004
- Malguarnera, S. C., Manisali, A. and Riggs, D. C., "Weld line structures and properties in injection molded polypropylene," Polym. Eng. Sci., Vol. 21, No. 17, pp. 1149-1155, 1981. https://doi.org/10.1002/pen.760211706
- Tomari, K., Tonogai, S., Harada, T., Hamada, H., Lee, K., Morii, T. and Maekawa, Z., "The V-Notch at weld lines in polystylene injection molding," Polym. Eng. Sci., Vol. 30, No. 15, pp. 931-936, 1990. https://doi.org/10.1002/pen.760301508
- Yao, D. and Kim, B., "Direct-search-based automatic minimization of weldlines in injection-molded parts," Polym. Plast. Tech. Engng., Vol. 37, No. 4, pp. 509-525, 1998. https://doi.org/10.1080/03602559808001377
- Park, J. C. and Kim, B. H., "Automated mold design to optimize multi-quality characteristics in injection molded parts based on the utility theory and modified complex method," J. Kor. Soc. Prec. Engng., Vol. 17, No. 9, pp. 210-221, 2000.
- Selden, R., "Effect on processing on weld line strength in five thermoplastics," Polym. Eng. Sci., Vol. 37, No. 1, pp. 205-218, 1997. https://doi.org/10.1002/pen.11663
- Kim, J. K., Song, J. H., Chung, S. T. and Kwon, T. H., "Morphology and mechanical properties of injection molded articles with weld lines," Polym. Eng. Sci., Vol. 37, No. 7, pp. 1202-1210, 1997.
- Tosello, G., Gava, A., Hansen, H. N., Lucchetta, G. and Marinello, F., "Characterization and analysis of weld lines on micro-injection moulded parts using atomic force microsco-py (AFM)," Wear, Vol. 266, No. 5-6, pp. 534-538, 2009. https://doi.org/10.1016/j.wear.2008.04.077
- Chen, S. C., Jong, W. R., Chang, Y. J., Chang, J. A. and Cin, J. C., "Rapid mold temperature variation for assisting the micro injection of high aspect ratio micro-feature parts using induction heating technology," J. Micromech. Microeng., Vol. 16, No. 9, pp. 1783-1791, 2006.
- Kim, S., Shiau, C. S., Kim, B. and Yao, D., "Injection molding nanoscale features with the aid of induction heating," Polym. Plast. Tech. Engng., Vol. 46, No. 11, pp. 1031-1037, 2007. https://doi.org/10.1080/03602550701522344
- Chen, S. C., Jong, W. R. and Chang, J. A., "Dynamic mold surface temperature control using induction heating and its effects on the surface appearance on weld line," J. Appl. Polym. Sci., Vol. 101, No. 2, pp. 1174-1180, 2006. https://doi.org/10.1002/app.24070
- Park, K. and Kim, Y. S., "Effect of mold temperature on mechanical properties of an injection-molded part with microfeatures," J. Polym. Engng., Vol. 29, No. 1-3, pp. 135-154, 2009. https://doi.org/10.1515/POLYENG.2009.29.1-3.135
- Park, K., Choi, S., Lee, S. J. and Kim, Y. S., "Injection molding for a ultra thin-wall part using induction heating," Trans. J. Kor. Soc. Mech. Engng.(A), Vol. 32, No. 6, pp. 95-102, 2008.
- Fisa, B. and Rahmani, M., "Weld line strength in injection molded glass fiber-reinforced polypropylene, "Polym. Eng. Sci., Vol. 31, No. 18, pp. 1330-1336, 1991. https://doi.org/10.1002/pen.760311807
- Tomari, K., Takashima, H. and Hamada, H., "Improvement of weldline strength of fiber reinforced polycarbonate injection molded articles using simultaneous composite injection molding, " Adv. Polym. Techol., Vol. 14, No. 1, pp. 25-34, 1995 https://doi.org/10.1002/adv.1995.060140103