대한금속재료학회지 (Korean Journal of Metals and Materials)

  • 제47권2호
  • /
  • Pages.129-137
  • /
  • 2009
  • /
  • 1738-8228(pISSN)
  • /
  • 2288-8241(eISSN)
대한금속재료학회 (The Korean Institute of Metals and Materials)
권호 표지

TiN피막 코팅된 치과주조용 합금의 부식거동

Corrosion Behaviors of TiN Coated Dental Casting Alloys

  • 조호형 (조선대학교 치과대학 치과재료학교실 및 생체재료나노계면활성화센터, 2단계 BK21) ;
  • 박근형 (조선대학교 치과대학 치과재료학교실 및 생체재료나노계면활성화센터, 2단계 BK21) ;
  • 김원기 (조선대학교 치과대학 치과재료학교실 및 생체재료나노계면활성화센터, 2단계 BK21) ;
  • 최한철 (조선대학교 치과대학 치과재료학교실 및 생체재료나노계면활성화센터, 2단계 BK21)
  • Jo, Ho-Hyeong (Department of Dental Materials & Research Center of Nano-Interface Activation for Biomaterials, College of Dentistry, 2nd Stage of Brain Korea 21 for College of Dentistry, Chosun University) ;
  • Park, Geun-Hyeng (Department of Dental Materials & Research Center of Nano-Interface Activation for Biomaterials, College of Dentistry, 2nd Stage of Brain Korea 21 for College of Dentistry, Chosun University) ;
  • Kim, Won-Gi (Department of Dental Materials & Research Center of Nano-Interface Activation for Biomaterials, College of Dentistry, 2nd Stage of Brain Korea 21 for College of Dentistry, Chosun University) ;
  • Choe, Han-Cheol (Department of Dental Materials & Research Center of Nano-Interface Activation for Biomaterials, College of Dentistry, 2nd Stage of Brain Korea 21 for College of Dentistry, Chosun University)
  • 투고 : 2008.09.21
  • 발행 : 2009.02.25
⟨ 이전 논문 다음 논문 ⟩

초록

Corrosion behaviors of TiN coated dental casting alloys have been researched by using various electrochemical methods. Three casting alloys (Alloy 1: 63Co-27Cr-5.5Mo, Alloy 2: 63Ni-16Cr-5Mo, Alloy 3: 63Co-30Cr-5Mo) were prepared for fabricating partial denture frameworks with various casting methods; centrifugal casting(CF), high frequency induction casting(HFI) and vacuum pressure casting(VP). The specimens were coated with TiN film by RF-magnetron sputtering method. The corrosion behaviors were investigated using potentiostat (EG&G Co, 263A. USA) in 0.9% NaCl solution at $36.5{\pm}1^{\circ}C$. The corrosion morphologies were analyzed using FE-SEM and EDX. Alloy 1 and Alloy 2 showed the ${\alpha}-Co$ and ${\varepsilon}-Co$ phase on the matrix, and it was disappeared in case of TiN coated Alloy 1 and 2. In the Alloy 3, $Ni_2Cr$ second phases were appeared at matrix. Corrosion potentials of TiN coated alloy were higher than that of non-coated alloy, but current density at passive region of TiN coated alloy was lower than that of non-coated alloy. Pitting corrosion resistances were increased in the order of centrifugal casting, high frequency induction casting and vacuum pressure casting method from cyclic potentiodynamic polarization test.

키워드

참고문헌

  1. R. G. Craig, W. J. O'brien, and J. M. Powers, Dental materials, 2nd ed., p.201,The C.V Mosby Co. (1979)
  2. R. G. Craig, and J. M. Powers, Restorative dental materials, 11th ed., Mosby, Inc., p.481-507 (2002)
  3. R. Earnshaw, Brit Dent J. 67, 101 (1956)
  4. S. Civjan, E. F. Hugut, W. L. Erhard, and G. J. Vaccaro, J Pros Dent. 28, 77 (1972) https://doi.org/10.1016/0022-3913(72)90157-6
  5. H. C. Choe, and Y. M. Ko, The Korea research society for Dental material 31, 21 (2004)
  6. H. C. Choe, and Y. M. Ko, Materials Science Forum 475, 2287 (2005) https://doi.org/10.4028/www.scientific.net/MSF.475-479.2287
  7. T. C. Nilson, Oliveira, A. Elivelton, Ferreira, T. Lais, Duarte, R. Sonia Biaggio, C. Romeu, Rocha-Filho, Nerilso Bocchi, Electrochimica Acta 51, 2068 (2006) https://doi.org/10.1016/j.electacta.2005.07.015
  8. D. E. MacDonald, F. Betts, M. Stranick, S. Doty, and A. L. Boskey, J Biomed Mater Res. 54, 4480 (2001) https://doi.org/10.1002/1097-4636(20010315)54:4<480::AID-JBM30>3.0.CO;2-T
  9. Z. L. Zhang, and T. Bell, Surface Engineering 1, 131 (1985) https://doi.org/10.1179/sur.1985.1.2.131
  10. D. M. Brunette, P. Tengvall, M. Textor, and P. Thomsen, Titanium in medicine, Springer, 320 (2001)
  11. H. C. Choe, K. S. Hong, Y. M. Ko, and B. O. Kim, J. Kor Inst Met & Mater. 44, 400 (2006)
  12. J. K. Lee, H.C. Choe, and C.H. Chung, Metals and Materials International 10, 327 (2004) https://doi.org/10.1007/BF03185981
  13. M. J. Han, H. C. Choe, and C.H. Chung, Metals and Materials International 11, 449 (2005) https://doi.org/10.1007/BF03027494
  14. M. Y. Oh, W. G. Kim, and H. C. Choe, J. Kor. Inst. Met. & Mater. 10, 691 (2008)