참고문헌
- Yoshida, K. and Tuihiji, S., "Multiple Drawing of Rails for Linear Motion Guide," Advanced Technology of Plasticity, Vol. 1, pp. 367-372, 2002
- Lange, K., "Handbook of Metal Forming," McGraw-Hill Book Company, pp. 14.22-14.23, 1985
-
Br
$\ddot{u}$ cker, M., Keller, D. and Reissner, J., "Computer-Aided Drawing of Profile from Round and Square Bar," Annals of the CIRP, Vol. 37, No. 1, pp. 247-250, 1988 https://doi.org/10.1016/S0007-8506(07)61628-X - Joun, M. S. and Hwang, S. M., "Pass Schedule Optimal Design in Multi-Pass Extrusion and Drawing by Finite Element Method," Int., J. Mach. Tools Manufact., Vol. 33, No. 5, pp. 713-724, 1993 https://doi.org/10.1016/0890-6955(93)90102-Z
- Lee, S. K., Kim, B. M., Kim, S. W., Lee, Y. S. and Lee, J. H., "Optimal Die Profile Design in Tube Drawing Process for Prevention of Material Fracture," J. KSPE, Vol. 23, No. 11, pp. 78-84, 2006
- Basily, B. B. and Sansome, D. H., "Some Theoretical Considerations for the Direct Drawing of Section Rod from Round bar," Int. J. Mech. Sci., Vol. 18, pp. 201-209, 1976 https://doi.org/10.1016/0020-7403(76)90026-6
-
Bo
$\ddot{e}$ r, C. R. and Riegger, H., "Pattern Recognition in Steel Profile Production," Int. J. Mach. Tool. Des. Res., Vol. 26, No. 1, pp. 21-34, 1986 https://doi.org/10.1016/0020-7357(86)90193-9 - Steff, W. and Kopp, R., "Estimation of designing methods for the drawing of section rods and wire," Wire J. Int., pp. 104-109, 1995
- Kim, Y. C., Kim, D. J. and Kim, B. M., "Intermediate Die Design System for the Multi-Stage Drawing Process," Trans. NAMRI/SME, Vol. 28, pp. 69-74, 2000