체크무늬 Shirts의 Marking 효율성에 관한 연구

A Study on the Marking Efficiency of Check-Patterned Shirts

  • Hong, Eun-Hee (Dept. of Clothing and Textiles, Hanyang University) ;
  • Suh, Mi-A (Dept. of Clothing and Textiles, Hanyang University)
  • 발행 : 2009.10.30

초록

This study is focused on the elucidation of efficient and correct marking methods by comparing and analyzing marker efficiency depending on the marking job condition such as interval of checking-pattern, width of materials, and marker orientation using man's shirts. To compare the marking efficiency of shirts, plain and check-patterned materials with the intervals of $1.5{\times}1.5cm$, $3{\times}3cm$, and $5{\times}5cm$ were selected. First, in the comparison of marking efficiency depending on materials width, the highest efficiency was obtained with nap-either-way position of 150cm, plain materials and lowest efficiency with nap-one-way position of 150cm, $5{\times}5cm$ check-pattern materials. Regardless of the direction of marker position, the marking efficiency of 150cm width was higher than 110cm width in the plain, $1.5{\times}1.5cm$ and $3{\times}3cm$ check-pattern interval, but the marking efficiency of 110cm width was higher than 150cm width in the $1.5{\times}1.5cm$ check-pattern interval. Second, in the comparison of marking efficiency depending on the direction of marker position, regardless of check-pattern interval and material width, the highest efficiency was obtained with nap-either-way position. And nap-up-and-down and nap-one-way follows next. Third, in the comparison of marking efficiency depending on check-pattern interval, the efficiency of plain materials was higher than those of check-patterned materials. And increasing the intervals decreased marking efficiency and vice versa. So the lowest efficiency was obtained with $5{\times}5cm$ check patterned materials.

키워드

참고문헌

  1. 김민균, 박창규, 강태진, 이재곤, 김선경 (1993). “의복패턴의 자동 최적배열에 관한 연구.” 한국섬유학회지 30권 12호.
  2. 김정숙, 권수애, 최종명 (2002). 의류봉제과학. 서울: 교학연구사.
  3. 김혜경, 조은정 (2004). “원피스 드레스 패턴 마킹의 효율성에 관한 연구.” 복식 54권 1호.
  4. 박길순 (1999). “기성복 생산 공정의 Marking에 관한 연구.” 동덕여자대학교 대학원 석사학위논문.
  5. 박길순, 류신아 (2000). “의복생산시 마킹(Marking) 공정에 관한 연구.” 복식문화연구 8권 1호.
  6. 서은숙 (2003). “패턴제작 및 마킹의 CAD시스템 활성화에 관한 연구.” 덕성여자대학교 대학원 석사학위논문.
  7. 어미경 (2006). “A-line Skirt의 Marking 효율에 관한 연구.” 한국의상디자인학회지 8권 1호.
  8. 이미숙, 어미경, 서미아 (2006). “바지의 Marking 효율성에 관한 연구.” 한국의류산업학회지 8권 3호.
  9. 이미숙, 어미경, 서미아(2006). “테일러드 재킷의 Marking 효율성에관한 연구.” 복식문화연구 14권 2호.
  10. 이미숙, 어미경, 서미아 (2006). “Flare Skirt의 재단 조건에 따른 Marking 효율에 관한 연구.” 복식문화연구 14권 2호.
  11. 이병홍 (1995). “의복 구성 시 CAD를 이용한 기본원형의 자동제도 및 무늬 맞춤에 관한 연구.” 배화여자대학.
  12. 오선희 (1994). 봉제과학과 생산관리. 서울: 경춘사.
  13. 조은정 (1996). “어패럴 CAD시스템을 이용한 Marking 효율성에 관한 연구 - 블라우스 패턴을 중심으 로.” 동덕여자대학교 대학원 석사학위논문.
  14. Patty Brown Janett Rice (1999). 기성복 분석. 서울: 경춘사.