• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.35 no.3
• /
• pp.21-28
• /
• 2003

It is essential to use base papers having proper surface characteristics in coating operation for improving coated paper quality and coater runnability. To fulfill these purposes surface sizing of coating base stock with anionic oxidized starch is commonly practiced. It is suggested that use of cationic starch for surface sizing rather than conventional oxidized starch will improve coated paper quality since cationic starch penetrates less into paper structure because of its strong electrostatic interaction with anionically charged paper surface. Strong interaction of cationic surface sizing starch with anionic coating color is expected to promote rapid immobilization of the coating color and improve coating holdout and optical property. The immediate objective of this study was to examine the influence of surface sizing starches on the properties of coated papers. Structural characteristics of the coatings formed on the substrate surface sized with cationic and anionic starches were examined. To enhance the efficiency of cationic surface sizing starch on coated paper properties, strongly charged cationic polymers were added to the surface sizing starch and its effect on coated paper properties was evaluated. Results showed that opacity and light scattering coefficient of coated paper were higher when base paper surface sized with cationic starch was used. Addition of less than 1% of cationic poly-DADMAC to the cationic surface sizing starch improved the opacity of coated paper significantly.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 1999.04b
• /
• pp.338-342
• /
• 1999

It has been proven in previous work that rosin sizing agents are distributed relatively homogeneously on the outer surface of paper. Therefore, rosin sizing agents on paper surfaces can be characterized by macro domain measurement techniques with very thin layer from the surface. In this work, the role of rosin sizing agents on paper surface was investigated by comparing wettability from contact angle measurement with the chemical state of the outermost surface by the ESCA. Furthermore, the role of rosin on the surface of paper was discussed by the quantity of hydroxyl groups obtained from chemical modification with the TFAA-ESCA technique. It was found from the ESCA data that the fixing mechanism with soap-type rosin sizing is different from that with emulsion-type rosin sizing.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.5
• /
• pp.54-62
• /
• 2012

The main role of surface sizing of linerboard is to improve surface and strength properties. Since surface sizing solution is applied on once dried web, substantial amount of drying energy is required. Saving of the drying energy associated with surface sizing can be made by increasing the solids content of the starch solution in size press. Therefore, it is highly desirable to develop low viscosity starches for surface sizing. A low viscosity oxidized starch was prepared and compared its effect of surface sizing with a conventional oxidised starch. Results showed increase in solids content of the starch solution decreased evaporation energy and drying time. Low viscosity starch penetrated deeper into paper and this improve various mechanical properties of linerboard.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.40 no.1
• /
• pp.1-8
• /
• 2008

It is essential to use base papers having proper surface characteristics in coating operation for improving coated paper quality and coater runnability. To fulfill these purposes, surface sizing of coating base stock with oxidized starch is commonly practiced. Use of cationic starch for surface sizing improves coated paper quality since cationic starch penetrates less into paper structure. The immediate objective of this study was to examine the influence of surface sizing with starch solutions containing cationic polymers on the rheology of coating colors and the effect on physical properties of coated papers. Changes of rheological characteristics of coating colors placed on the plastic substrate surface sized with cationic and anionic starch were determined. Results of rheological test showed that cationic polymer surface sizing agent increased electrostatic interaction with coating colors and increased storage modulus. This new technology of using cationic polymer as surface sizing additive was considered to be advantageous for base papers at low basis weights since it would improve the coverage and optical properties of coated papers.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.35 no.5
• /
• pp.17-25
• /
• 2003

The influence of base paper properties and fiber type on coating penetration was studied in terms of characterization of coating holdout using two types of hand sheets as the base paper which were prepared from thermomechanical pulp (TMP) and hardwood bleached kraft pulp(KP) sized internally with alkyl ketene dimmer (AKD). Laboratory rod draw down coater was used for surface sizing and coating application. Characterization of coating penetration was done by measuring the roughness of the backside of coating layer. The backside of the coating was exposed by dissolving the fibers in a solution of cupriethylenedimine (CEO). Data show that internal sizing of base paper is effective and surface sizing is more effective to prevent coating penetration. Comparing between the two types of base papers, backside roughness of coating layer of TMP sheet is much larger and sizing is more effective to reduce coating penetration than those of KP sheet. From the result of water absorption and sizing degree after surface sizing, it seems that internal sizing slows down molecular diffusion much more than capillary penetration, but surface sizing reduces the capillary penetration. Furthermore, predominant mechanism of water into paper of TMP sheet seems to be capillary penetration, but it is molecular diffusion in the case of KP sheet.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.1
• /
• pp.21-26
• /
• 2013

The influences of heat treatment and surface sizing on coating penetration were studied using two types of commercial base papers. Dry oven was used for heat treatment and laboratory rod draw down coater was used for surface sizing and coating application. Coating penetration was evaluated by measuring the roughness of the backside of coating layer. The backside of the coating was exposed by dissolving the fibers in a cupriethylenedimine(CED) solution. The results showed that both heat treatment and surface sizing were the effective methods to increase sizing degree and to reduce coating penetration.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06b
• /
• pp.245-250
• /
• 2006

This study was focused on the use of cationic PAM (Polyacrylamide) as a surface sizing additive to improve the surface sizing properties of paper. Effects of the ionic property, viscosity and charge density of PAM on bending stiffness of surface sized papers were investigated. Use of cationic PAM as a surface sizing additive improved bending stiffness while addition of anionic PAM did not show any effect. Increase of starch holdout with the addition of cationic PAM was attributed as a prime reason of stiffness increase. Viscosity of PAM was one of the most important factors affecting surface sizing due to its influence on the interaction between cationic PAM and oxidized starch solution. Greater improvement of bending stiffness of paper was obtained when high charged PAM was used as an additive. The order of addition was found to have significant influence on the effect of additives since it influences the formation of network structure among starch, cationic PAM, and SA (styrene acrylic acid copolymer). Investigation on the penetration of starch solution was carried out with CLSM (Confocal Laser Scanning Microscopy), and it was shown that the addition of cationic PAM to oxidized starch solution made starch molecules stay on the paper surface rather than penetrating into the paper structure because of the electrostatic interaction between negatively charged fibers and positively charged cationic PAM.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.34 no.1
• /
• pp.7-11
• /
• 2002

The print quality of a ink jet printer is generally affected by three major components of the printing process: printer, ink formulation, and paper. The result of this study indicated that the surface sized paper with oxidized starch and cationic starch differed ink jet print quality in terms of ink spread and black optical density of the print image. Paper properties, like air permeability and siting degree, which may influence the ink jet printing were also measured. It was found that black print quality was controlled by starch level and ionic charge on the paper surface. Cationic surface sizing starch improved black ink jet print quality.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.15 no.2
• /
• pp.131-143
• /
• 1997

Surface sizing is one of the important process to the paper making. Surface sizing had an effect on penetration of oils, physical propertiesm water resistance for the paper. This study was carried out for the purpose of improving printability with surface sizing of domestic newspaper. The samples were prepared by means of TAPPI method(TAPPI 205 om~88), and were wested by IGT printability tester. The results of this study showed that the set-off was reduced on the surface sized with oxidized starch.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.37 no.2 s.110
• /
• pp.11-20
• /
• 2005

This study was carried out to investigate the influence of paper stock type and heat treatment on sizing effect. Various types of pulps were used to make handsheets sized internally with AKD(alkyl ketene dimer) and externally with CMC(carboxyl methyl cellulose). Most of the handsheets were treated with heat by dry oven $(100^{\circ}C,\;30min)$ to evaluate the effect of heat treatment on sizing development. Internal sizing development of newsprint was very bad, but the effect of heat treatment was much higher than those of NBKP, BCTMP. In case of surface sizing, newsprint was more effective compared to the other pulps. Considering above mentioned results, it seems that internal sizing slows down water into paper by molecular diffusion much more than capillary penetration, but surface sizing slows down capillary penetration. With regard to density, a higher thickness sheets showed high heat treatment effect on sizing, therefore it assumed that heat treatment effect on sizing had very close relationship with sheet density.