Restorative Dentistry and Endodontics

The Korean Academy of Conservative Dentistry (대한치과보존학회)
권호 표지
DOI QR코드

DOI QR Code

PHYSICAL PROPERTIES OF DIFFERENT SELF-ADHESIVE RESIN CEMENTS AND THEIR SHEAR BOND STRENGTH ON LITHIUM DISILICATE CERAMIC AND DENTIN

수종의 자가 접착 레진 시멘트의 물성 및 lithium disilicate ceramic과 상아질에 대한 전단결합강도 비교

  • Shin, Hye-Jin (Department of Dentistry, Collage of Medicine, Ajou University) ;
  • Song, Chang-Kyu (Department of Conservative Dentistry, Collage of Dentistry, Kangnung National University) ;
  • Partk, Se-Hee (Department of Conservative Dentistry, Collage of Dentistry, Kangnung National University) ;
  • Kim, Jin-Woo (Department of Conservative Dentistry, Collage of Dentistry, Kangnung National University) ;
  • Cho, Kyung-Mo (Department of Conservative Dentistry, Collage of Dentistry, Kangnung National University)
  • 신혜진 (아주대학교 의과대학 치과학교실) ;
  • 송창규 (강릉대학교 치과대학 치과보존학교실) ;
  • 박세희 (강릉대학교 치과대학 치과보존학교실) ;
  • 김진우 (강릉대학교 치과대학 치과보존학교실) ;
  • 조경모 (강릉대학교 치과대학 치과보존학교실)
  • Published : 2009.05.31
Download PDF
⟨ Previous Next ⟩

Abstract

The purpose of this study was to evaluate the physical properties of different self-adhesive resin cements and their shear bond strength on dentin and lithium disilicate ceramic and compare these result with that of conventional resin cement. For this study, four self-adhesive resin cements (Rely-X Unicem, Embrace Wetbond, Mexcem, BisCem), one conventional resin cement (Rely-X ARC) and one restorative resin composite (Z-350) were used. In order to evaluate the physical properties, compressive strength, diametral tensile strength and flexural strength were measured. To evaluate the shear bond strength on dentin, each cement was adhered to buccal dentinal surface of extracted human lower molars. Dentin bonding agent was applied after acid etching for groups of Rely-X ARC and Z-350. In order to evaluate the shear bond strength on ceramic, lithium disilicate glass ceramic (IPS Empress 2) disks were prepared. Only Rely-X ARC and Z-350 groups were pretreated with hydrofluoric acid and silane. And then each resin cement was adhered to ceramic surface in 2 mm diameter. Physical properties and shear bond strengths were measured using a universal testing machine. Results were as follows 1. BisCem showed the lowest compressive strength, diametral tensile strength and flexural strength. (P<0.05) 2. Self-adhesive resin cements showed significantly lower shear bond strength on the dentin and lithium disilicate ceramic than Rely-X ARC and Z-350 (P<0.05) In conclusion, self-adhesive resin cements represent the lower physical properties and shear bond strength than a conventional resin cement.

본 연구의 목적은 치면 처리와 수복물 내면의 처리가 필요 없는 자가 접착 레진 시멘트의 물성 및 lithium disilicate ceramic과 상아질에 대한 전단결합강도를 측정하고 기존의 레진 시멘트와 비교하여 임상적 유용성을 알아보고자 하는 것이다. 실험군인 자가 접착 레진 시멘트로는 Rely-X Unicem, Embrace Wetbond, Maxcem, BisCem을, 대조군으로는 기존의 레진 시멘트인 Rely-X ARC, 수복용 복합레진인 Z-350을 사용하였다. 각 레진 시멘트의 물성 평가를 위하여 테플론 주형을 이용하여 시편을 제작하고 만능 시험기를 이용하여 압축강도, 간접인장강도, 굴곡강도를 측정하였다. IPS Empress 2 및 상아질 시편에 제조사의 지시대로 Rely-X ARE군과 Z-350군에만 전처리를 시행 후 각 시멘트를 접착하고 전단결합강도를 측정하였다. 실험 결과는 다음과 같았다. 1. 자가 접착 레진 시멘트인 Biscem이 가장 낮은 물리적 성질을 나타내었다 (P<0.05). 2. 자가 접착 레진 시멘트의 상아질 및 도재에 대한 전단결합강도는 기존의 레진 시멘트에 비해 유의성 있게 낮은 값을 나타내었다. (P<0.05). 이상의 결과로 볼 때 자가 접착 레진 시멘트는 기존의 레진 시멘트에 비해 물리적 성질 및 상아질과 lithium disilicate ceramic에 대한 전단결합강도가 떨어지는 것으로 사료된다.

Keywords

References

  1. Saygili G, Sahmali S. Effect of ceramic surface treatment on the shear bond strengths of two resin luting agents to all-ceramic materials. J Oral Rehabil 30(7):758-64, 2003 https://doi.org/10.1046/j.1365-2842.2003.01027.x
  2. Nuray A, Laura E. Tam, Dorothy M. Mechanical and physical properties of contemporary dental luting agents. J Prosthet Dent 89(2):127-34. 2003 https://doi.org/10.1067/mpr.2003.20
  3. Dietschi D, Maeder M, Meyer JM, Holz J. In vitro resistance to fracture of porcelain inlays bonded to tooth. Quintessence Int 21(10):823-31, 1990
  4. Blatz MB, Sadan A, Kern M. Resin-ceramic bonding: a review of the literature. J Prosthet Dent 89(3):268-74, 2003 https://doi.org/10.1067/mpr.2003.50
  5. Mak YF, Lai SC, Cheung GS, Chan AW, Tay FR, Pashley DH. Micro-tensile bond testing of resin cements to dentin and an indirect resin composite. Dent Mater 18(8):609-21, 2002 https://doi.org/10.1016/S0109-5641(02)00005-2
  6. 오선경, 허복, 김현철. 법랑질에 대한 total-etching과 selfetching 접착제의 산부식 효과와 미세인장결합강도. 대한치과보존학회지 29:273-280, 2004
  7. Knobloch LA, Gailey D, Azer S, Johnston WM, Clelland N, Kerby RE. Bond strengths of one- and two-step self-etch adhesive systems. J Prosthet Dent 97(4):216-22, 2007 https://doi.org/10.1016/j.prosdent.2007.02.013
  8. Technical data sheet: Rely X Unicem, 3M ESPE, St Paul. USA; 2007
  9. Pereira PN, Okuda M, Sano H, Yoshikawa T, Burrow MF, Tagami J. Effect of intrinsic wetness and regional difference on dentin bond strength. Dent Mater 15(1):46-53, 1999 https://doi.org/10.1016/S0109-5641(99)00013-5
  10. Tay FR, Pashley DH, Suh BI, Carvalho RM, Itthagarun A. Single-step adhesives are permeable membranes. J Dent 30(3):371-82, 2002 https://doi.org/10.1016/S0300-5712(02)00064-7
  11. Reis A, Loguercio AD, Carvalho RM, Grande RH. Durability of resin dentin interfaces: effects of surface moisture and adhesive solvent component. Dent Mater 20(7):669-76, 2004 https://doi.org/10.1016/j.dental.2003.11.006
  12. Asmussen E, Peutzfeldt A. Influence of UEDMA BisGMA and TEGDMA on selected mechanical properties of experimental resin composites. Dent Mater 14(1):51-6, 1998 https://doi.org/10.1016/S0109-5641(98)00010-4
  13. Chung KH, Greener EH. Correlation between degree of conversion, filler concentration and mechanical properties of posterior composite resins. J Oral Rehabil 17(5):487-94, 1990 https://doi.org/10.1111/j.1365-2842.1990.tb01419.x
  14. Wood M, Kern M, Thompson VP, Romberg E. Ten-year clinical and microscopic evaluation of resin-bonded restorations. Quintessence Int 27(12):803-7, 1996
  15. 조민우, 박상혁, 김종률, 최경규. 레진시멘트의 접착 내구성에관한 연구. 대한치과보존학회지 32:343-355, 2007
  16. Nakabayashi N. Dentinal bonding mechanisms. Quintessence Int 22(2):73-4, 1991
  17. Kumbuloglu O, Lassila LV, User A, Toksavul S, Vallittu PK. Shear bond strength of composite resin cements to lithium disilicate ceramics. J Oral Rehabil 32(2):128-33, 2005 https://doi.org/10.1111/j.1365-2842.2004.01400.x
  18. Escribano N, de la Macorra JC. Microtensile bond strength of self-adhesive luting cements to ceramic. J Adhes Dent 8(5):337-41, 2006
  19. Ozcan M, Vallittu PK. Effect of surface conditioning methods on the bond strength of luting cement to ceramics. Dent Mater 19(8):725-31, 2003 https://doi.org/10.1016/S0109-5641(03)00019-8
  20. Thurmond JW, Barkmeier WW, Wilwerding TM. Effect of porcelain surface treatments on bond strengths of composite resin bonded to porcelain. J Prosthet Dent 72(4):355-9, 1994 https://doi.org/10.1016/0022-3913(94)90553-3
  21. Fabianelli A, Goracci C, Bertelli E, Monticelli F, Grandini S, Ferrari M. In vitro evaluation of wall-towall adaptation of a self-adhesive resin cement used for luting gold and ceramic inlays. J Adhes Dent 7(1):33-40, 2005

Cited by

  1. Effect of curing modes on micro-hardness of dual-cure resin cements vol.36, pp.2, 2011, https://doi.org/10.5395/JKACD.2011.36.2.132
  2. The effect of the strength and wetting characteristics of Bis-GMA/TEGDMA-based adhesives on the bond strength to dentin vol.36, pp.2, 2011, https://doi.org/10.5395/JKACD.2011.36.2.139
  3. Shear bond strength of a self-adhesive resin cement to resin-coated dentin vol.51, pp.1, 2013, https://doi.org/10.4047/jkap.2013.51.1.27
  4. Compressive Strength Evaluation in Brazed ZrO2/Ti6Al4V Joints Using Finite Element Analysis vol.25, pp.5, 2016, https://doi.org/10.1007/s11665-016-2043-2