3-aminopropyltrimethoxysilane(APTMOS)을 코팅한 PET 필름의 산소차단성 연구

The Oxygen Barrier Properties of 3-aminopropyltrimethoxysilane (APTMOS) Coatings on PET Film

  • 이성구 (한국생산기술연구원 청정생산기술연구부) ;
  • 김현준 (경기대학교 화학공학과)
  • Lee, Sung-Koo (Green Engineering Team, Korea Institute of Industrial Technology) ;
  • Kim, Hyun-Joon (Department of Chemical Engineering, Kyonggi University)
  • 발행 : 2009.06.30

초록

The oxygen barrier films were formed on poly(ethylene terephthalate) (PET) substrate by a sol-gel process using 3-aminoproprytrimethoxysilane (APTMOS). The effects of solvent type, coating times and incorporation of fumed silica on oxygen permeability coefficient were investigated. The APTMOS coating film prepared from methanol as a solvent exhibited higher oxygen barrier properties than that using THF. The oxygen permeability coefficient of coated film with APTMOS/methanol by coating 7 times was measured to be $2.28{\times}10^{-6}$, while that of PET film was $1.16{\times}10^{-4}$ GPU. The addition of fumed silica does not affect the oxygen barrier properties. It may be explained that silica particles disrupt chain packing, which leads to an increase in free volume for permeation.

키워드

참고문헌

  1. Judeinstein, P. and Sanchez, C., "Hybrid Organic-Inorganic Materials; a Land of Multidisciplinarity", J. Mater. Chem., Vol. 6, pp. 511-525, 1996. https://doi.org/10.1039/jm9960600511
  2. Uhlmann, D.R. and Teowee, G., "Sol-Gel Science and Technology; Current State and Future Prospects", J. Sol-Gel Sci. Technol., Vol. 13, pp. 153-162, 1998. https://doi.org/10.1023/A:1008692430779
  3. Haas, K.H., Amberg-Schwab, S., Rose, K. and Schottner, G., "Functionalized Coatings Based on Inorganic-Organic Polymers and Their Combination with Vapor Deposited Inorganic Thin Films", Surface Coatings Technol., Vol. 111, pp. 72-79, 1999. https://doi.org/10.1016/S0257-8972(98)00711-7
  4. Jang, J., Bae, J. and Kang, D., "Role of Silane Coupling Agents for Performance Improvement of Poly-(vinyl acetate)/tetraethylorthosilicate Hybrid Composites Prepared by a Sol-Gel Process", Polym. Int., Vol. 50, pp. 1247-1251, 2001. https://doi.org/10.1002/pi.734
  5. Chu, L., Daniels, M.W. and Francis, L.F., "Use of (Clycidoxypropyl)trimethoxysilane as a Binder in Colloidal Silica Coatings", Chem. Mater., Vol. 9, pp. 2577-2582, 1997. https://doi.org/10.1021/cm9702880
  6. Schrotter, J.C., Smaihi, M. and Guizard, C., "Polyimide-Siloxane Hybrid Materials: Influence of Coupling Agents Addition on Microstructure and Properties", J. Appl. Polym. Sci., Vol. 61, pp. 2137-2149, 1996. https://doi.org/10.1002/(SICI)1097-4628(19960919)61:12<2137::AID-APP12>3.0.CO;2-4
  7. Kim, H., "The Preparation of Sol-Gel Derived Aminoalkoxysilane Films and its Application for Oxygen Barrier", J. Semiconductor & Display Equipment Technology., Vol. 5, pp. 17-21, 2006.
  8. Kim, H., Lim, C. and Hong, S.I., "Gas Permeation Properties of Organic-Inorganic Hybrid Membranes Prepared from Hydroxyl-Terminated Polyether and 3-isocyanatopropyltriethoxysilane", J. Sol-Gel Sci. Technol., Vol. 36, pp. 213-221, 2005. https://doi.org/10.1007/s10971-005-3782-y
  9. Brinker, C.J., "Hydrolysis and Condensation of Silicates: Effect on Structure", J. Non-cryst. Solids, Vol. 100, pp. 31-40, 1988. https://doi.org/10.1016/0022-3093(88)90005-1
  10. He, Z., Pinnau, I., and Morisato, A.,"Nanostructured Poly(4-methyl-2-pentyne)/Silica Hybrid Membranes for Gas Separation", Desalination, Vol. 146, pp. 11-15, 2002. https://doi.org/10.1016/S0011-9164(02)00463-0
  11. Ahn, J., Chung, W., Pinnau, I. and Guiver, M.D., "Polysulfone/Silica Nanoparticle Mixed-Matrix Membranes for Gas Separation", J. Membrane Sci., Vol. 314, pp. 123-133, 2008. https://doi.org/10.1016/j.memsci.2008.01.031
  12. Jang, K. and Kim, H., "The Gas Barrier Coating of 3-Aminopropyltriethoxysilane on Polypropylene Film", J. Sol-Gel Sci. Technol., Vol. 41, pp. 19-24, 2007. https://doi.org/10.1007/s10971-006-0114-9
  13. Metroke, T.L., Kachurina, O. and Knobbe, E.T., "Spectroscopic and Corroson Resistance Characterization of GLYMO-TEOS Ormosil Coatings for Aluminum Alloy Corrosion Inhibition" Progress in Organic Coatings, Vol. 44, pp. 295-298, 2002. https://doi.org/10.1016/S0300-9440(02)00063-2