한국항공우주학회지 (Journal of the Korean Society for Aeronautical & Space Sciences)

  • 제37권7호
  • /
  • Pages.642-652
  • /
  • 2009
  • /
  • 1225-1348(pISSN)
  • /
  • 2287-6871(eISSN)
한국항공우주학회 (The Korean Society for Aeronautical and Space Sciences)
권호 표지
DOI QR코드

DOI QR Code

항공기 겹침이음 조립구조의 프레팅 피로수명 예측

Prediction of Fretting Fatigue Life for Lap Joint Structures of Aircraft

  • 권정호 (울산대학교 항공우주공학과) ;
  • 주선영 (울산대학교 항공우주공학과 대학원)
  • 발행 : 2009.07.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

항공기 주구조에 많은 부분은 겹침이음 형태의 조립구조이며 이러한 구조는 프레팅 손상으로 인해 단순피로에 비해 현저히 수명이 감소된다. 특히 노후 항공기의 경우 프레팅 피로균열은 감항안전을 저해하는 중요한 요인으로 최근 대두된 수명연장 문제와 관련해서도 손상허용성 평가에 프레팅 피로수명 예측이 필수적으로 요구되고 있다. 이러한 배경으로 본 연구에서는 볼트 체결력이 서로 다른 겹침이음 구조시편에 대하여 일련의 프레팅 피로시험을 수행하고 탄소성 접촉응력 유한요소해석 결과로부터 프레팅 파라미터를 구하고 균열발생 및 성장 수명예측 모델식과 최근 제안된 수정 모델식을 통하여 프레팅 피로수명을 예측하였다. 또한 시험결과와 비교분석함으로써 실제 항공기 겹침이음 구조에 프레팅 피로수명 예측 모델식의 적용 유효성을 고찰하였다.

Most of lap jointed aircraft structures encounter the fretting damages, which provoke fretting cracks prematurely and lead to significant reduction of fatigue life. In the case of ageing aircrafts especially, this fretting fatigue problem is a fatal threat for the safety and airworthiness. Recently, as the service life extension program(SLEP) of ageing aircrafts has become a hot issue, the prediction of fretting fatigue life is also indispensable. On these backgrounds, a series of experimental tests of fretting fatigue on bolted lap joint specimens, were performed. And the fretting crack initiation and propagation life of each specimen were evaluated using existing and newly proposed prediction models with the fretting parameters obtained from the FEA results for elasto-plastic contact stress analyses. The validations of prediction models were also discussed, comparing the prediction results with experimental test ones.

키워드

참고문헌

  1. Forsyth, P. J. E., “Occurrence of fretting fatigue failures in practice",- In Fretting Fatigue, R. B. Waterhouse, ed., London: Elsevier Applied Science Publishers, 1981, pp. 99-125.
  2. Ricci Moretti, L. U., Segerfrojd, G. and Palmberg, B., "Fatigue behavior of mechanical joints: A Programme Overview and an Introduction to Fretting and Fretting Fatigue with Special Applacation to Joints", Royal Institute of Technology Departmaent of Aeronautics, The Aeronautical Research Institute of Sweden, KTH Report No. 98-33, 1998. pp. 108-114.
  3. Piascik, R. S. and Willard, S. A., “The characteristics of fatigue damage in the fuselage riveted lap splice joint", Technical Report NASA/TP-97-206257, NASA Langley Research Center, 1999. pp. 23-27.
  4. Muller, R. P. G. , “An experimental and analytical investigation on the fatigue behaviour of fuselage riveted lap joints", Ph.D thesis, Delt University of Technology, The Netherlands, 1995. pp. 34-38.
  5. McVeigh, P. A. and Farris, T. N., "Finite element analysis of fretting stresses", Journal of Tribology No. 119, Vol. 4, 1997. pp. 797-801. https://doi.org/10.1115/1.2833887
  6. Szolwinski, M. P. and Farris, T. N., "Observation, analysis and prediction of fretting fatigue in 2024-T351 Al-alloy," Wear, No. 221, 1998, pp. 24-36. https://doi.org/10.1016/S0043-1648(98)00264-6
  7. 권정호, 황경정, “2024-T351 알루미늄 합금 판 프레팅 피로수명 예측", 한국항공우주학회지, 제35권 7호, 2007. pp. 601-611.
  8. Murakami, Y., Stress Intensity Factors Handbook, Vol.II, Pergamon Press, 1987.
  9. Anderson, T. L., Fracture Mechanics, CRC Press, Inc., Boca Raton, Florida, U.S.A., 1995.
  10. Irwin, G. R., “Plastic zone near a crack and fracture toughness", Proc. of the 7th Sagamore Conference, Vol. IV, 1960, pp. 63-76.
  11. Elber, W., "The significance of fatigue crack closure", Damage Tolerance in Aircraft Structures, ASTM STP No. 486, Philadelphia, U.S.A., 1971, pp. 230-242.
  12. Paris, P. C., Gomez, M. P. and Anderson, W. E., "A ratinal analytic theory of fatigue", The Trend in Engineering, Univ. of Washington, Seattle, WA, Vol. 13, Jan. 1961, pp. 9-14.
  13. ABAQUS/Standard User's Manual, Vol. 2, Hibbit, Karlsson and Sorensen, Inc., 1995.
  14. Metallic Materials and Elements for Aerospace Vehicle Structures, MIL-HDBK-5G, Vol. 1, November 1994.
  15. 박재춘 외 3명, 신기계설계학, 청문각, 1988, p. 154.
  16. Collins, J. A, Failure of Materials in Mechanical Design, John Wiley & Sons, 1981, pp. 481-484.
  17. 권정호외 5인, “2024-T351 알루미늄 합금 겹침이음 구조에 대한 프레팅 피로손상 연구”, 국방과학연구소 기초연구 중간보고서, TECD-101, 2004.
  18. Engle, R. M., "CRACK II User's Manual", AFFDL TM-173-FBE, Aug. 1974.

피인용 문헌

  1. Degradation Assessment of Aluminum Alloy 6061-T6 Using Ultrasonic Attenuation Measurements vol.33, pp.1, 2013, https://doi.org/10.7779/JKSNT.2013.33.1.20
  2. Durability Analysis by Shape of Brake Disk Structure vol.22, pp.1, 2013, https://doi.org/10.7735/ksmte.2013.22.1.36