DOI QR코드

DOI QR Code

프루브 길이에 따른 A5052 겹치기 마찰교반접합 특성

Characteristics of Friction Stir Lap Welded A5052 with Probe Length

  • Ko, Young-Bong (Korea Testing & Research Institute) ;
  • Kang, Chae-Won (Materials Science and Metallurgical Engineering of Kyungpook National University) ;
  • Choi, Jun-Woong (Research Institute of Medium & Small Shipbuilding) ;
  • Park, Kyeung-Chae (Materials Science and Metallurgical Engineering of Kyungpook National University)
  • 발행 : 2009.12.31

초록

The Friction Stir Welding (FSW) has mainly been used for making butt joints in Al alloys. The development of Friction Stir Lap Welding (FSLW) would expand the number of applications. In this study, for effective application on thin aluminum alloy lap joint, non-heat treatment A5052 alloys were joined by FSLW with the length of probe 2.3 mm and 3.0 mm. Investigating the characteristics of joint area showed the results were as below ; When the length of probe was 2.3 mm, good joint area was formed at all welding condition except for 600 rpm-700 mm/min. In the case of 3.0 mm probe length, there was formed good joint area without defects at 1500 rpm-100 mm/min. The width of joint area, position and size of defects were very important factors for FSLW, due to heat input and stirring intensity.

키워드

참고문헌

  1. 장석기, 한국박용기관학회지, 27(6) (2003) 728
  2. Y. C. Chen and K. Nakata, Metallugical and Materials Transactions A, 39A (2008) 1985
  3. D. Fersini, A. Pirondi, Engineering Fracture Mechanics, 74 (2007) 468 https://doi.org/10.1016/j.engfracmech.2006.07.010
  4. 이창길, 김성준, 한흥남, 대한금속·재료학회지, 43(11) (2005) 718
  5. Fomotake Hirata, Material Science & Engineering A, 456 (2007) 344 https://doi.org/10.1016/j.msea.2006.12.079
  6. Won-Bae Lee, Journal of KWS, 22(3) (2004) 265
  7. Vijay Soundararajan, JMEPEG, 16 (2007) 477 https://doi.org/10.1007/s11665-007-9081-8
  8. Z. W. Chen, Materials Science and Engineering A, 474 (2008) 312 https://doi.org/10.1016/j.msea.2007.05.074
  9. 박재철, 김성종, 한국표면공학회지, 42(1) (2009) 13 https://doi.org/10.5695/JKISE.2009.42.1.013

피인용 문헌

  1. Characteristics of Friction Stir Lap Weldment according to Joining Parameter in 5052 Aluminium Alloy vol.45, pp.5, 2012, https://doi.org/10.5695/JKISE.2012.45.5.181
  2. Characteristics of Friction Stir Welded AZ31 Mg Alloys with Shoulder Diameter and Rotating Speed vol.46, pp.1, 2013, https://doi.org/10.5695/JKISE.2013.46.1.036
  3. FSW Properties of Aluminum alloy 5000/6000 for Small Boat vol.32, pp.1, 2014, https://doi.org/10.5781/JWJ.2014.32.1.34