References
- H.Y.Lee, J.K.Roe and A.lkenaga, 'Sliding Wear Properties for Ni-Al Based Intennetallic Compound Layer Coated on Ductile Cast lron by Combustion Synthesis', Wear, Vol. 260, pp. 83-89, 2006 https://doi.org/10.1016/j.wear.2004.12.033
- T.Kimata, K.Uenishi, A.Ikenaga and K.Kobayashi, 'Enhanced Densífication of Combustíon Synthesized Ni-Al Intennetallic Compound by Sí Addition', Intermetallics, No. 11, pp. 947-952, 2003 https://doi.org/10.1016/S0966-9795(03)00120-1
- H.Y.Lee, A.lkenaga, K.B.Kim and S.H.Kim, 'The Etfects of Induction Heating Rate on Properties of Ní-AI Based Intennetallic Compound Layer Coated on Ductile Cast lron by Combustion Synthesís', Intermetallics, No. 15, pp. 1050- 1056, 2007
- T.Murotani, T.Tacuchí, A.Ikenaga and Y.Hirose, ' Preparation of Ni-Al System Intennεtallic Compound by Reactive Sintering and Their Applications to Coating', J Jpn' Foμndry Eηg. Soc, Vol. 74, pp. 429-435, 2002
-
T.Murotani, T.Tacuchl, A.Ikenaga and Y.Hirose, '
$Ni_3Al$ Coating by Reactive Sintering and Theír Wear Characteristics', J of Jpn Foundry Eng Soc. vol. 75, No. 9, pp. 539-599, 2003 - A.Okamoto, N.Ueda, K.Demizu, T.Sone, A.Ikenaga and Y.Hirose, 'Preparation of Ní-AI Intennetallic Compound Coating on Spheoidal Graphite Cast Iron by Combustion Synthesis and Heat Treatment', J of Jpn Foundry Eng Soc, Vol. 76, No. 6, pp. 454-461, 2004
- A.lkenaga, Y.Goto, Y.Nitta, M.Kawamoto, K.Kobayashi and H.Araki, 'Densification of Ni-Al Intennetallic Coating on Spheroidal Graphite Cast Iron S ubstrate', J. Jpn. Foundry Eng Soc'' Vol. 68, pp. 852-857, 1996
- A.Ikenaga, Y.Goto, Y.Nitta, K.Kawamoto, K.Kobayashi and K. Uenishi, 'Fabrication of Ni-Al Intennetallic Compound Layer on Spheroidal Graphite Cast Iron Substrate by SHS Reaction', J. Jpn. Foundry Eng Soc. , Vol. 68, pp. 417-422, 1996
- A.Okamoto, A.lkenaga, T.Yoshimoto, Y.Hirose and H.Y. Lee, 'Effects on Silicon Additíon on NickelAluminide Surface Coatings Through Combustion Synthesis', J Jpn Foundry. Eng Soc., Vol. 77, pp. 744-751 , 2005
- C.Sierra and A.J.Vazquez, 'Dry Sliding Wear Behavior of Nickel Aluminides Coatings Produced by Selfpropagating High Temperature Synthesis', Interme-tallics Vol. 14, pp. 848-852, 2006 https://doi.org/10.1016/j.intermet.2005.12.005
- M .Salehi, F.Karimzadeh and A. Tahvílian, 'Fonnation of Ti-Ni Intermetallic Coatings on Carhon SteeI by a Duplex Proeess', Surf Coat. Tech., Vol. 48, pp. 55-60, 2001
- Z.Zhan, Y.He, D.Wang and w.Gao, 'Low-ternperature Processing of Fe-Al Intennetallic Coatings Assisted by Ball Milling', Intermetallics, Vol. 14, pp. 75-81 , 2006 https://doi.org/10.1016/j.intermet.2005.04.019
-
J.Li, Y.Ytn and H.Ma, ' Preparation and properties of
$Fe_3AI$ -based friction materials', Tribology Int, vol. 38, pp. 159-163, 2005 https://doi.org/10.1016/j.triboint.2004.07.024 - Materials Science Society of Japan, 'IntennetaIlic Compound for Materials', Japan, Shokabo Book Co, 1995
- Research group for cornbustion synthesis, 'Chernistry of Cornbustion Synthesis', Japan, TIC Book Co.; 1992
- H.Y.Lee, 'Analysis of Sliding Wear Mode on Anncaled Steel by X-ray Diffraction Technique', Wear, Vol. 256, pp. 657-663, 2004 https://doi.org/10.1016/S0043-1648(03)00512-X