과제정보
연구 과제 주관 기관 : 교량설계핵심기술연구단
참고문헌
- 건설교통부(2005) 도로교설계기준, 한국도로교통협회
- 교량설계핵심기술연구단(2009) 교량설계핵심기술연구 - 교량 해석 및 설계 선진화, 건설교통부, 한국건설교통기술평가원, 03산C02-01, 5차년도 연구보고서
- 박민석, 배두병, 황희승(2001) 고속도로 교량 활하중 정형화에관한 연구, 한국도로공사 연구보고서, 도로연 01-26
- 박영석, 심낙훈(2000) 도로교의 피로하중모형에 관한 연구, 대한토목학회논문집, 제 20권, 5A호, pp. 715-724
- 배두병, 정경섭, 조재병, 황의승(1996) 강형교의 교통량 분석을 통한 설계 피로하중산정과 발생응력의 모형화 연구, 한국강구조학회 보고서
- 배두병, 황희승(2004) 강교량 설계를 위한 피로하중모형, 대한토목학회논문집, 제24권, 1A호, pp. 225-232
- 신동구, 권태형, 박영석(2007) 통행차량 특성을 반영한 강교량피로설계트럭의 피로파괴 신뢰도해석, 한국강구조학회 논문집, 제19권 2호, 2007년 4월, pp. 211-221
- 조은영, 신동구(2009a) 허용응력설계법 및 하중저항계수설계법에 의한 강합성 거더교 설계결과 비교(I- 플레이트 거더), 대한토목학회논문집, 심사중
- 조은영, 신동구(2009b) 허용응력설계법 및 하중저항계수설계법에 의한 강합성 거더교 설계결과 비교 (II- 박스 거더), 대한토목학회논문집, 심사중
- AASHTO(1996) Standard Specifications for Highway Bridges(16th Ed.)
- AASHTO(2004) AASHTO LRFD Bridge Design Specifications
- BSI(1985) BS 5400: Steel, concrete and composite bridges, Part 2 Specification for Loads
- CEN(1994) Eurocode 4: Design of Composite Steel and Concrete Structures-Part2: Rules for Bridges
- CSA(2000) Canadian Highway Bridge Design Code, CAN/CAS-S6-00, Canadian Standards Association International, Toronto, Ontario, Canada
- Keating, P. B., and Fisher, J. W.(1985) Review of fatigue tests and design criteria on welded details, Fritz Engrg. Lab. Report 488-I(85), Lehigh Univ., Bethlehem, Penn., USA
- Laman, J. A.(1995) Fatigue load models for girder bridges, Ph.D Thesis, Univ. of Michigan, Ann Arbor, Michigan, USA
- Miner, M. A.(1945) Cumulative damage in fatigue, J. Appl. Mech., Trans. ASME, Vol. 67, pp. A159
- Nyman, W.E. and Moses, F.(1985) Calibration of bridge fatigue design model, J. Struc. Eng., ASCE, 111(6), pp. 1251-1266 https://doi.org/10.1061/(ASCE)0733-9445(1985)111:6(1251)
- OHBDC(1981) Ontario Highway Bridge Design Code, Ontario Ministry of Transportation and Communication, Downsview, Ontario, Canada
- Rackwitz, R. and Fiessler, B.(1978) Structural reliability under combined random load sequences, Computers and Structures, Vol. 9, pp. 489-494 https://doi.org/10.1016/0045-7949(78)90046-9
- Raju, S. K., Moses. F. and Schilling, C. G.(1990) Reliability calibration of fatigue evaluation and design procedures, J. Struc. Eng., ASCE, 116(5), pp. 1356-1369 https://doi.org/10.1061/(ASCE)0733-9445(1990)116:5(1356)
- Schilling, C. G. and Klippstein, K. H.(1977) Fatigue of steel beams by simulated bridge traffic, J. Struc. Eng., ASCE, 103(8), pp. 425-438
- Schilling, C. G.(1982) Lateral-distribution factors for fatigue design, J. Struc. Eng., ASCE, 108(9), pp. 2015-2033
- Schilling, C. G.(1984) Stress cycles for fatigue design of steel bridges, J. Struc. Eng., ASCE, 110(6), pp. 1222-1234 https://doi.org/10.1061/(ASCE)0733-9445(1984)110:6(1222)