참고문헌
- K. Lange, Handbook of Metal Forming, McGraw-Hill Company, 1985
- W. Steuff, R. Kopp, 1995, Estimation of designing methods for the drawing of section rods and wire, Wire J. Int., Vol. 28, pp. 104-109
- K. Yoshida, S. Tuihiji, 2002, Multiple drawing of rails for linear motion, Adv. Technol., Plast., Vol. 1, pp. 367-372
- B. B. Basily, D. H. Sansome, 1976, Some theoretical considerations for the direct drawing of section for from round bar, Int. J. Mech., Sci., Vol. 18, pp. 201-208 https://doi.org/10.1016/0020-7403(76)90026-6
- JSTP, Drawing Process, Korona, 1990
- T. K. Lee, C. J. Lee, S. K. Lee, B. M. Kim, 2009, Prediction of drawing load in the shape drawing process, Trans. Mater. Process. Vol. 18, No. 4, pp. 323-328 https://doi.org/10.5228/KSPP.2009.18.4.323
- H. K. Shin, S. R. Lee, C. H. Park, D. Y. Yang, 2002, The optimal design of preform in 3-D forging by using electric field theory, Trans. Mater. Process. Vol. 11, No. 2, pp. 165-170 https://doi.org/10.5228/KSPP.2002.11.2.165
- J. E. Lee, T. K. Lee, S. K. Lee, B. M. Kim, 2008, Design of the cross sectional shape of intermediate die for shaped drawing of spline, Trans. Mater. Process. Vol. 17, No. 8, pp. 627-632
피인용 문헌
- Design Method for the Intermediate Dies in Multi-Stage Shape Drawing: The Case for a Hollow Linear Motion Guide Rail vol.24, pp.3, 2015, https://doi.org/10.5228/KSTP.24.3.15
- Optimization of Process Variables of Shape Drawing for Steering Spline Shaft vol.19, pp.2, 2010, https://doi.org/10.5228/KSPP.2010.19.2.132