• Transactions of Materials Processing
• /
• v.18 no.7
• /
• pp.550-555
• /
• 2009

In the multi-pass shape drawing process, the pass schedule that includes the determination of reduction ratio and intermediate die shape is very important. This study used the equal reduction, equal load, and electric field analysis method for pass schedule of the multi-pass shape drawing. The reduction ratio was calculated by the equal reduction and equal load method. And the intermediate die shape was determined by the result of the electric field analysis and the calculated reduction ratio. The proposed pass schedule method was applied to a shape drawing for producing cross roller guide. Finally, FE-analysis and shape drawing experiment were performed to verify the effectiveness of the proposed method.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.10a
• /
• pp.91-92
• /
• 2009

• ICROS
• /
• v.1 no.1
• /
• pp.50-50
• /
• 1995

It has been pointed out in the literature that the Routh approximation method for order reduction has limitations in treating transfer functions with the denominator-numerator order difference not equal to one. The purpose of this paper is to present a new algorithm based on the Routh approximation method that can be applied to general rational transfer functions, yielding reduced models with arbitrary order.

• The Transactions of the Korea Information Processing Society
• /
• v.1 no.3
• /
• pp.380-390
• /
• 1994

In this paper, we propose an equal-cost bifurcated routing algorithm which may be useful in practical computer network design problem. The performance of the routing algorithm is evaluated using the conventional Monte Carlo simulation and a transient queueing approximation. The relative errors between the closure approximation and the Monte Carlo simulation was fairly small. The closure approximation may be used to evaluate the performance of the load splitting algorithms, which results in considerable execution time reduction. The performance of the proposed algorithm is compared to that of the known algorithms based on average packet delay. For networks that have many non-disjoint equal-paths, the proposed algorithm performed better than other algorithms.

• Design & Manufacturing
• /
• v.13 no.2
• /
• pp.1-5
• /
• 2019

In this study, micro cellular injection molding of automobile head lamp housing with uneven thickness structure was performed to obtain improvement on deformation and light-weight of the part. The thickness of the presented model was uniformly modified to control the deformation of the molded part. In order to maximize the lightweight ratio, the model having an average thickness of 2.0 mm were thinly molded to an average thickness of 1.6 mm. GFM(Gas Free Molding) and CBM(Core Back Molding) technology were applied to improve the problems of the conventional foam molding method. Equal Heat & Cool system was also applied by 3D cooling core and individual flow control system. Warpage of the molded parts with even cooling was minimized. To improve the mechanical properties of foamed products, complex resin containing nano-filler was used and variation of mechanical properties was evaluated. It was shown that the weight reduction ratio of products with light-weighted injection molding was 8.9 % and the deformation of the products was improved from the maximum of 3.6 mm to 2.0 mm by applying Equal Heat & Cool mold cooling system. Also the mechanical strength reduction of foamed product was less than 12% at maximum.

• Environmental and Resource Economics Review
• /
• v.20 no.2
• /
• pp.167-198
• /
• 2011

The Korean government recently announced greenhouse gases (GHG) emissions reduction target as 30% of 2020 business as usual (BAU) emission projection. As carbon emissions trading is widely used to achieve reductions in the emissions of pollutants, this study deals with the sectoral allocation of initial carbon emission permits in Korea. This research tests the effectiveness of a variety of allocation rules based on the bankruptcy problem in cooperative game theory and hybrid input-output tables which combines environmental statistics with input-output tables. The impact of initial emission permits allocation on economic growth is also analyzed through green growth accounting. According to the analysis result, annual GDP growth rate of Korea is expected to be 4.03%, 4.23%, and 3.67% under Proportional, Constrained Equal Awards, and Constrained Equal Losses rules, respectively. These rates are approximately from 0.69% points to 0.13% points lower than the growth rate of 4.36% without compulsory $CO_2$ reduction. Thus, CEA rule is the most favorable in terms of GDP growth. This study confirms the importance of industry level study on the carbon reduction plan and initial carbon emission permits should reflect the characteristic of each industry.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.4 no.3
• /
• pp.204-209
• /
• 2004

A partial matched filter (PMF) for semi-coherent correlation code acquisition of the DSSS-CPFSK signal is proposed. It is a calculation-reduced structure of the hard-limited signal based FIR filter, yet its code acquisition time is equal to that of the hard-limited signal based FIR filter. The PMF eliminates duplicate calculations by utilizing the characteristic that the hard-limited DSSS-CPFSK signal has same value in several consecutive samples. For example, the PMF can achieve about 95% reduction in gate size, as compared to the hard-limited signal based FIR filter, when the modulation index of the DSSS-CPFSK signal is equal to 1.5 and the sample rate is equal to 40 sample/chip.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.17 no.3
• /
• pp.107-115
• /
• 2013

The purpose of this study was to investigate the performance of hollow reinforced concrete bridge column sections with reinforcement details for material quantity reduction. The proposed reinforcement details has have economic feasibility and rationality and makes construction periods shorter. A model of column sections with reinforcement details for material quantity reduction was tested under quasistatic monotonic loading. As a result, the proposed reinforcement details for material quantity reduction was were equal to existing reinforcement details in terms of the required performance. In the a subsequent paper, the an experimental and analytical study will be performed for the performance assessment of hollow reinforced concrete bridge column sections with reinforcement details for material quantity reduction will be performed.

• International Journal of Highway Engineering
• /
• v.17 no.5
• /
• pp.19-24
• /
• 2015

PURPOSES : The noise, which is typically generated by fast moving vehicles, can be intercepted by installing a noise barrier with a soundproof panel. However, reflections from the panels cause secondary noise, and hence lower the effectiveness of the panels. In this study, the reduction of reflection noise by considering the shape, especially zigzag one, of the soundproof panel have been evaluated. METHODS : The simulation model used in this study was Nord2000, which simulates real-road situations effectively. Based on the simulation results, the joining angle of $133^{\circ}$ with the pattern width (a) equal to 2 m and the projection height (b) equal to 0.5 m was adapted in the zigzag shape as the best profit designing factors. RESULTS: The measuring results at middle height, 15 m showed reduction at all points except the point with average -1.6 dB. At a greater height of 30 m, 2 points showed reduction. A real-sized facility was constructed to investigate the reflected sound from a zigzag shaped panel up to the height of 5 m. CONCLUSIONS: The reduction effects were detected in all the receive points in the range of 2-6 m distances and 1-5 m heights comparing the plane panel. Compared to plane panel, the noises are reduced at an average of 2.4 dBA.

• Transactions on Control, Automation and Systems Engineering
• /
• v.1 no.1
• /
• pp.50-53
• /
• 1999

It has been pointed out in the literature that the Routh approximation method for order reduction has limitations in treating transfer functions with the denominator-numerator order difference not equal to one. The purpose of this paper is to present a new algorithm based on the Routh approximation method that can be applied to general rational transfer functions, yield ing reduced models with arbitrary order.