Engineering Characteristics of the Light Weight Soil Using Phosphogypsum and EPS Beads

인산석고-EPS 조각을 활용한 경량혼합토의 공학적 특성

  • 김영상 (전남대학교 건설.환경공학부) ;
  • 서동은 ((주)EJ tech 토목설계부) ;
  • 김원봉 (전남대학교 건설.환경공학과) ;
  • 이우범 (전남대학교 건설.환경공학부)
  • Received : 2009.02.20
  • Accepted : 2009.08.24
  • Published : 2009.10.01

Abstract

The current study developed light-weighted mixed soil that can solve problems related with soft soil such as ground subsidence, sliding and lateral displacement of ground. By reducing weight of reclaimed soil through mixing phosphogypsum and recycled EPS beads with the weathered granite soil. A series of geotechnical laboratory tests including physical index test, compaction test, CBR test, and direct shear test were performed and engineering properties were reviewed in order to assess applicability of the light-weighted mixed soil for roads and abutment and various back-filling materials at the reclamation area. Based on the laboratory test results, it was found that the maximum dry unit weight of the light-weighted soil ranges $14.32{\sim}15.79kN/m^3$ and the optimum water content ranges 21.91~24.23%, which means there is 11~19.3% weight decrease effect when comparing with general weathered granite soil. Also it was found that the corrected CBR value ranges 10.4~18.4% satisfying the domestic regulations on road subgrade and back-filling material. In addition, as for shear strength parameter, cohesion ranges 10.79~18.64 kPa and internal frictional angle ranges $35.4{\sim}37.2^{\circ}$, which are similar with those of general construction soil and back-filling material used in Korea. So it can be concluded that light-weighted mixed soil with phosphogypsum can be used effectively for soft reclamation ground as actual filling material and back-filling material. From the current study, it was found that light-weighted mixed soil with phosphogypsum has not only weight reduction effect, but also has no special problems in shear strength and bearing capacity. Therefore, it is expected that phosphogypsum can be recycled in bulk as road subgrade and back-filling material at the reclamation area.

본 연구에서는 산업부산물인 인산석고와 EPS 조각을 기존의 성토용 토사에 혼합하여 지반응력을 감소시킴으로써 고함수비로 준설매립된 공유수면 내 초연약지반의 침하, 활동파괴, 측방유동 등의 문제를 해결할 수 있는 경량혼합토를 개발하였다. 개발된 경량혼합토는 공유수면 매립지역에서 대량이용이 가능한 도로 및 교대의 성토재료, 각종 뒤채움재로의 사용에 대한 적용성을 평가하기 위하여 기본물성시험, 다짐시험, CBR시험, 전단강도시험 등 일련의 실내시험을 수행하였고 지반공학적 특성을 검토하였다. 시험결과, 경량혼합토의 최대건조단위중량은 $14.32{\sim}15.79kN/m^3$, 최적함수비는 21.91~24.23%로 일반 화강풍화토와 비교할 때 9.4~19.3%의 하중감소 효과가 있으며, 수정 CBR값은 10.4~18.4%로 국내 도로노상 및 뒤채움재에 대한 규정을 만족하는 것으로 나타났다. 또한 전단강도정수는 점착력 10.79~18.64kPa, 내부마찰각 $35.4{\sim}37.2^{\circ}$로 각각 나타나 국내에서 일반적으로 사용되는 성토재료 및 뒤채움재 범위를 충족시키는 것으로 평가되어 실제 성토재료 및 뒤채움재로 연약지반에서 효과적으로 활용이 가능할 것으로 판단되었다. 본 연구를 통하여 개발된 인산석고 경량혼합토는 하중감소 효과가 있으면서도 전단강도와 지지력면에서 큰 문제가 없어서 연약한 임해매립지반의 도로 노상토 및 뒤채움재로 사용될 수 있어 인산석고의 대량 재활용방안이 될 것으로 판단된다.

Keywords

Acknowledgement

Supported by : 한국산업단지공단

References

  1. 건설교통부 (2000), 도로설계편람, 제 4편 토공 및 배수, pp. 405-1-7, 407-1-4, 408-24-26.
  2. 건설교통부 (2005), 골재채취업무편람, 건설선진화본부 건설지원팀, pp. 4-8
  3. 김홍택, 방윤경 (1996), 지오그리드-폐 EPS 조각 혼합경량토의 마찰특성, 한국지반공학회지, 제12권, pp. 163-183.
  4. 방윤경, 김홍택, 김승욱, 박민용, 박성철 (2003), 경량성토재로서의 부산석회 재활용 방안 연구, 한국지반환경공학회 가을학술 발표회 논문집, pp. 19-26.
  5. 신방웅, 이종규 (2000), 폐스티로폴 입자와 현장발생토를 활용한 경량혼합토의 공학적 특성, 한국지반환경공학회논문집, 제1권 1호, pp. 43-50.
  6. 이용수, 정형식, 정하익 (2001), 성토재료로서 인산석고의 공학적 환경적 특성, 한국지반공학회논문집, 제17권, 4호, pp. 331-339.
  7. 이용수 (2002), 인산석고 혼합 준설점토의 물리 화학적 특성과 환경적 영향, 박사학위논문, 한양대학교, pp. 71-147.
  8. 정하익 등 (2001), 인산부산석고의 매립성토재 및 지반재료로서 유효활용에 관한 연구, 건기연 2001-026, 남해화학주식회사, pp. 5-252.
  9. 한국도로공사 (2001), 도로설계요령, 제 2권 토공 및 배수, pp. 85-102.
  10. 환경부령 제316호 (2008), 폐기물관리법 시행규칙, 66조 3항 관련 별표 16의2.