Journal of the Korean Ceramic Society (한국세라믹학회지)

The Korean Ceramic Society (한국세라믹학회)
권호 표지
DOI QR코드

DOI QR Code

Development of Ceramic Body using Waste Celadon

청자 파도자기를 활용한 도자기 소지 개발

  • Lee, Jea-Il (Department of Ceramic Engineering, Myongji University) ;
  • Park, Joo-Seok (Korea Institute of Ceramic Engineering and Technology) ;
  • Lee, Yong-Seok (Department of Ceramic Engineering, Myongji University) ;
  • Lee, Byung-Ha (Department of Ceramic Engineering, Myongji University)
  • 이제일 (명지대학교 신소재공학과) ;
  • 박주석 (한국세라믹기술원 기업협력센터) ;
  • 이용석 (명지대학교 신소재공학과) ;
  • 이병하 (명지대학교 신소재공학과)
  • Published : 2009.11.30
Download PDF
⟨ Previous Next ⟩

Abstract

The yield is increasing as the manufacturing technology of ceramics progresses, however, there are many ceramics of poor quality due to variables upon producing ceramics. Some of those waste ceramics are recycled by sanitary ware or tile manufacturers, but most of them are filled in making environmental problem. Therefore, a research begins to recycle waste ceramic ware as alternative to some imported ceramic ware materials and to reduce environmental pollution. This study, succeeding last study which applied waste white ware as ceramic body material, aimed to solve problems of environment and materials by recycling waste ceradon generated in specially formed areas for ceramic in Gyeonggi-do such as Icheon, Yeoju and Gwangju as the ceramic body material. Consequently, the addition of waste ceramic ware into the ceramic body was judged to have limit up to 30% according to plasticity measurement. As we added shredded waste ceramic ware as much as 30% into basic ceramic body and checked its features, the pore rate and absorption rate were good to be average 4% and 3% respectively. In addition, it showed strength more than 720 kgf/$cm^2$ which is higher than existing ceradon body on the market with good sinter state; so it is judged to be available or developed as new ceramic body.

Keywords

References

  1. J. H. Lee, E. S. Na, and S.C.Choi, “A Study on the Effect of Residual Stress between Body and Glaze of Pottery on the Mechanical Strength,” Kor. J. Mat. Res., 9 [2] 181-86 (1999)
  2. Y. G. Jung, “Effect of Firing Temperature on Mechanical Property and Contact Damage in Pottery,” J. Kor. Ceram, Soc., 35 [12] 1343-50 (1998)
  3. W. M. Carty and U. dnSenapati, “Porcelain-Raw Materials, Processing, Phase Evolution and Mechanical Behavior,” J. Am. Ceram. Soc., 81 [1] 3-20 (1998) https://doi.org/10.1111/j.1151-2916.1998.tb02290.x
  4. A. W. Norris, D. Taylor, and I. Thorpe, “Range Curve: An Experimental Method for the Study of Vitreous Pottery Bodies,” Trans. J. Br. Ceram. Soc., 78 102-8 (1992)
  5. Y. Kobayashi, O. Ohira, Y. Ohashi, and E. Kato, “Effect of Firing Temperature on Bending Strength of Porcelain for Tableware,” J. Am. Ceram. Soc., 75 [7] 1801-6 (1992) https://doi.org/10.1111/j.1151-2916.1992.tb07200.x
  6. H. J. Lim, S. C. Choi, E. S. Lee, and J. S. Lee, "Effect of Processing Parameters on the Densification - Behaviors by Low Shrinkage in Clay Materials,” J. Kor. Ceram. Soc., 33 [7] 725-34 (1996)
  7. E. S. Lee, “Studies on the Mechanical Properties of Porcelain Bodies,” J. Kor. Ceram. Soc., 11 [3] 69-79 (1974)
  8. R. C. Bradt, “A High-Tech Approach to a Traditional Ceramic-The Toughness of Porcelain,” pp. 15~22 in proceeding of International Symposium on Fine Ceramics Arita 86, 1986
  9. F. Andreola, L. Barbieri, A. Corradi, I. Lancellotti, and T. Manfredini, “Utilisation of Municipal Incinerator Grate Slag for Manufacturing Porcelainized Stoneware Tiles Manufacturing,” J. Eur. Ceram. Soc., 22 [9-10] 1457-62 (2002) https://doi.org/10.1016/S0955-2219(01)00460-5
  10. I. Agote, A. Odriozola, N. Gutierrez, A. Santamaria, J. Quintanilla, P. Coupelle, and J. Soares, “Rheological Study of Waste Porcelain Feedstocks for Injection-Molding,” J. Eur. Ceram. Soc., 21 [16] 2843-53 (2001) https://doi.org/10.1016/S0955-2219(01)00210-2
  11. A. P. Luz, S. Ribeiro, “Use of Glass Waste as a Raw Material in Porcelain Stoneware Tile Mixtures,” Ceramics International, 33 761-65 (2007) https://doi.org/10.1016/j.ceramint.2006.01.001
  12. R. R. Menezes, H. G. Malzac Neto, L. N. L. Santana, H. L. Lira, H. S. Ferreira, and G. A. Neves, “Optimization of Wastes Content in Ceramic Tiles Using Statistical Design of Mixture Experiments,” J. Eur. Ceram. Soc., 28 3027-39 (2008) https://doi.org/10.1016/j.jeurceramsoc.2008.05.007
  13. R. R. Menezes, H. S.Ferreira, G. A. Neves, H. de L. Lira, and H. C. Ferreira. “Use of Granite Sawing Wastes in the Production of Ceramic Bricks and Tiles,” J. Eur. Ceram. Soc., 25 [7] 1149-58 (2005) https://doi.org/10.1016/j.jeurceramsoc.2004.04.020
  14. F. A. Costa Oliveira, V. Livramento, F. Delmas, “Novel Mullite-based Ceramics Manufactured from Inorganic Wastes I. Densification Behaviour,” J. Mater. Pro. Tech., 196 101-8 (2008) https://doi.org/10.1016/j.jmatprotec.2007.05.011
  15. J. O. Hong, S. G. Kang, K. G. Lee, Y. T. Kim, Y. J. Kim, J. H. Kim, and M. S. Park, “Characteristics of Sintered Bodies Made from the System of Paper Sludge Ash-Fly Ash-Clay,” J. Kor. Ceram. Soc., 38 [10] 908-13 (2001)
  16. S. W. Lee, H. J. Kim, and E. H. Kim, “Control of Permanent Shrinking of Recycled Castable Refractories from Waste Refractories of $Al_2O_3-SiO$,” J. Kor. Ceram. Soc., 29 [1] 15-22 (1992)
  17. J. I. Lee, Y. S. Lee, and B. H. Lee “Ceramics Body Development Using Waste Whiteware,” J. Kor. Ceram. Soc., 43 [10] 626-34 (2006) https://doi.org/10.4191/KCERS.2006.43.10.626
  18. B. S. Han, “Test and Characterization of Porcelain Body,” 14th Pottery Symposium in Korea, 14 47-58 (2001)
  19. H. Schneider, K. Okada, and J. A. Pask, “Mullite and Mullite Ceramics,” John Wiley & Sons, 148-67 (1994)
  20. I. S. Kim, S. W. Kang, J. S. Park, M. W. Lee, B. H. Lee, and K. H. Lee, “Influence of Mullite-seed on the Mullite Synthesis from Various Compositions,” J. Kor. Ass. Crystal Growth, 10 [1] 48-54 (2000)

Cited by

  1. Development of ceramic glazes utilizing wasted porcelains vol.21, pp.2, 2011, https://doi.org/10.6111/JKCGCT.2011.21.2.087