Browse > Article
http://dx.doi.org/10.4191/KCERS.2009.46.6.602

Development of Ceramic Body using Waste Celadon  

Lee, Jea-Il (Department of Ceramic Engineering, Myongji University)
Park, Joo-Seok (Korea Institute of Ceramic Engineering and Technology)
Lee, Yong-Seok (Department of Ceramic Engineering, Myongji University)
Lee, Byung-Ha (Department of Ceramic Engineering, Myongji University)
Publication Information
Journal of the Korean Ceramic Society / v.46, no.6, 2009 , pp. 602-608 More about this Journal
Abstract
The yield is increasing as the manufacturing technology of ceramics progresses, however, there are many ceramics of poor quality due to variables upon producing ceramics. Some of those waste ceramics are recycled by sanitary ware or tile manufacturers, but most of them are filled in making environmental problem. Therefore, a research begins to recycle waste ceramic ware as alternative to some imported ceramic ware materials and to reduce environmental pollution. This study, succeeding last study which applied waste white ware as ceramic body material, aimed to solve problems of environment and materials by recycling waste ceradon generated in specially formed areas for ceramic in Gyeonggi-do such as Icheon, Yeoju and Gwangju as the ceramic body material. Consequently, the addition of waste ceramic ware into the ceramic body was judged to have limit up to 30% according to plasticity measurement. As we added shredded waste ceramic ware as much as 30% into basic ceramic body and checked its features, the pore rate and absorption rate were good to be average 4% and 3% respectively. In addition, it showed strength more than 720 kgf/$cm^2$ which is higher than existing ceradon body on the market with good sinter state; so it is judged to be available or developed as new ceramic body.
Keywords
Recycle; Waste ceramic; Ceradon; Ceramic body; Environmental problem;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
Times Cited By SCOPUS : 3
연도 인용수 순위
1 J. H. Lee, E. S. Na, and S.C.Choi, “A Study on the Effect of Residual Stress between Body and Glaze of Pottery on the Mechanical Strength,” Kor. J. Mat. Res., 9 [2] 181-86 (1999)   과학기술학회마을
2 I. Agote, A. Odriozola, N. Gutierrez, A. Santamaria, J. Quintanilla, P. Coupelle, and J. Soares, “Rheological Study of Waste Porcelain Feedstocks for Injection-Molding,” J. Eur. Ceram. Soc., 21 [16] 2843-53 (2001)   DOI   ScienceOn
3 B. S. Han, “Test and Characterization of Porcelain Body,” 14th Pottery Symposium in Korea, 14 47-58 (2001)
4 H. Schneider, K. Okada, and J. A. Pask, “Mullite and Mullite Ceramics,” John Wiley & Sons, 148-67 (1994)
5 Y. G. Jung, “Effect of Firing Temperature on Mechanical Property and Contact Damage in Pottery,” J. Kor. Ceram, Soc., 35 [12] 1343-50 (1998)   과학기술학회마을
6 W. M. Carty and U. dnSenapati, “Porcelain-Raw Materials, Processing, Phase Evolution and Mechanical Behavior,” J. Am. Ceram. Soc., 81 [1] 3-20 (1998)   DOI   ScienceOn
7 A. W. Norris, D. Taylor, and I. Thorpe, “Range Curve: An Experimental Method for the Study of Vitreous Pottery Bodies,” Trans. J. Br. Ceram. Soc., 78 102-8 (1992)
8 Y. Kobayashi, O. Ohira, Y. Ohashi, and E. Kato, “Effect of Firing Temperature on Bending Strength of Porcelain for Tableware,” J. Am. Ceram. Soc., 75 [7] 1801-6 (1992)   DOI
9 H. J. Lim, S. C. Choi, E. S. Lee, and J. S. Lee, "Effect of Processing Parameters on the Densification - Behaviors by Low Shrinkage in Clay Materials,” J. Kor. Ceram. Soc., 33 [7] 725-34 (1996)   과학기술학회마을
10 E. S. Lee, “Studies on the Mechanical Properties of Porcelain Bodies,” J. Kor. Ceram. Soc., 11 [3] 69-79 (1974)   과학기술학회마을
11 R. C. Bradt, “A High-Tech Approach to a Traditional Ceramic-The Toughness of Porcelain,” pp. 15~22 in proceeding of International Symposium on Fine Ceramics Arita 86, 1986
12 F. Andreola, L. Barbieri, A. Corradi, I. Lancellotti, and T. Manfredini, “Utilisation of Municipal Incinerator Grate Slag for Manufacturing Porcelainized Stoneware Tiles Manufacturing,” J. Eur. Ceram. Soc., 22 [9-10] 1457-62 (2002)   DOI   ScienceOn
13 A. P. Luz, S. Ribeiro, “Use of Glass Waste as a Raw Material in Porcelain Stoneware Tile Mixtures,” Ceramics International, 33 761-65 (2007)   DOI   ScienceOn
14 R. R. Menezes, H. G. Malzac Neto, L. N. L. Santana, H. L. Lira, H. S. Ferreira, and G. A. Neves, “Optimization of Wastes Content in Ceramic Tiles Using Statistical Design of Mixture Experiments,” J. Eur. Ceram. Soc., 28 3027-39 (2008)   DOI   ScienceOn
15 R. R. Menezes, H. S.Ferreira, G. A. Neves, H. de L. Lira, and H. C. Ferreira. “Use of Granite Sawing Wastes in the Production of Ceramic Bricks and Tiles,” J. Eur. Ceram. Soc., 25 [7] 1149-58 (2005)   DOI   ScienceOn
16 F. A. Costa Oliveira, V. Livramento, F. Delmas, “Novel Mullite-based Ceramics Manufactured from Inorganic Wastes I. Densification Behaviour,” J. Mater. Pro. Tech., 196 101-8 (2008)   DOI   ScienceOn
17 J. O. Hong, S. G. Kang, K. G. Lee, Y. T. Kim, Y. J. Kim, J. H. Kim, and M. S. Park, “Characteristics of Sintered Bodies Made from the System of Paper Sludge Ash-Fly Ash-Clay,” J. Kor. Ceram. Soc., 38 [10] 908-13 (2001)   과학기술학회마을
18 S. W. Lee, H. J. Kim, and E. H. Kim, “Control of Permanent Shrinking of Recycled Castable Refractories from Waste Refractories of $Al_2O_3-SiO$,” J. Kor. Ceram. Soc., 29 [1] 15-22 (1992)   과학기술학회마을
19 J. I. Lee, Y. S. Lee, and B. H. Lee “Ceramics Body Development Using Waste Whiteware,” J. Kor. Ceram. Soc., 43 [10] 626-34 (2006)   과학기술학회마을   DOI   ScienceOn
20 I. S. Kim, S. W. Kang, J. S. Park, M. W. Lee, B. H. Lee, and K. H. Lee, “Influence of Mullite-seed on the Mullite Synthesis from Various Compositions,” J. Kor. Ass. Crystal Growth, 10 [1] 48-54 (2000)   과학기술학회마을