References
- Collins, M. P. and Mitchell, D., Prestressed Concrete Structure, Prentice Hill, 1991, 766 pp
- ACI Committee 318, “Building Code Requirements for Structural Concrete and Commentary (ACI 318M-05),” American Concrete Institute, Farmington Hills, 2005, 436 pp
- American Association of State Highway and Transportation Officials, AASHTO LRFD Bridge Design Specifications, Third Edition, AASHTO, Washington, DC, 2004, 1450 pp
- CAN3-A23.3-M94, Design of Concrete Structure, Canadian Standard Association, Rexdale, Ontario, 1994, 353 pp
- BSI 8110-85, Section 4.3.7.3: Structural Use if Concrete, British Standards Institution, London, 1985, 161 pp
- DIN 4227, “Part 6: Prestressed Concrete, Construction of Prestressed Concrete Member,” German Code, 1980, 365 pp
- NEN 3880, “Part H: Regulations for Concrete,” Dutch Code, 1984, Section 503.1.3
- 한국콘크리트학회, 콘크리트구조설계기준 해설, 한국콘크리트학회, 2007, 523 pp
- Mojtahedi, S. and Gamble, W. L., “Ultimate Steel Stresses in Unbonded Prestressed Concrete,” ASCE, Journal of Structural Division, Vol. 104, No. ST7, 1978, pp. 1159-1165
- Warwaruk, J., Sozen, M. A., and Siess, C. P., “Investigation of Prestressed Concrete for Highway Bridges, Part.: Strength and Behavior in Flexure of Prestressed Beam,” Bulletin, Engineering Experiment Station, University of Illinois, Urbana, Ill, No. 464, 1962. 105 pp
- Janney, J. R., Hognestad, E., and Mchenry, D., “Ultimate Flexural Strength of Prestressed and Conventionally Reinforced Concrete Beam,” ACI Structural Journal, Title No. 52-37, 1956, pp. 601-620
- Du, G. and Tao, X., “Ultimate Stress of Unbonded Tendons in Partially Prestressed Concrete Beams,” PCI Journal, Vol. 30, No. 6, 1985, pp. 72-91 https://doi.org/10.15554/pcij.11011985.72.91
- Harajli, M. H. and Kanj, M. Y., “Ultimate Flexural Strength of Concrete Members Prestressed With Unbonded Tendons,” ACI Structural Journal, Vol. 88, No. 6, 1991, pp. 663-673
- Campbell, T. I. and Chouinard, K. L. “Influence of Non-prestressed Reinforcement on the Strength of Unbonded Partially Prestressed Concrete Member,” ACI Structural Journal, Vol. 88, No. 5, 1991, pp. 546-551
- Chakrabarti, P. R., “Ultimate Stress for Unbonded Post-Tensioning Tendons in Partially Prestressed Beam,” ACI Structural Journal, Vol. 92 No. 6, 1995, pp. 689-697
- 문정호, 임재형, 이창규, “비부착 프리스트레스트 보강재를 갖는 PSC 부재의 변위와 프리스트레스트 보강재 응력의 상관관계 및 변수별 효과,” 콘크리트학회 논문집, 14권, 2호, 2002, pp. 171-179 https://doi.org/10.4334/JKCI.2002.14.2.171
- Ozkul, O., Nassif, H., Tanchan, P., and Harajli, M. H., “Rational Approach for Predicting Stress in Beams with Unbonded Tendons,” ACI Structural Journal, Vol. 105, No. 3, 2008, pp. 338-347
- Tam, A. and Pannell, F. N., “The Ultimate Moment Resistance of Unbonded Partially Prestressed Reinforced Concrete,” Magazine of Concrete Research, Vol. 28, No. 97, 1976, pp. 203-208 https://doi.org/10.1680/macr.1976.28.97.203
- Lee, L. H., Moon, J. H., and Lim, J. H., “Proposed Methodology for Computing of Unbonded Tendon Stress at Flexural Failure,” ACI Structural Journal, Vol. 96, No. 6, 1999, pp. 1040-1048
- Harajli, M. H., “On the Stress in Unbonded Tendon at Ultimate: Critical Assessment and Proposed Change,” ACI Structural Journal, Vol. 103, No. 6, 2006, pp. 803-812
- Harajli, M. H., “Effect of Span-Depth Ratio on The Ultimate Steel Stress in Unbonded Prestressed Concrete Members,” ACI Structural Journal, Vol. 87, No. 3, 1990, pp. 305-312
- Naaman, A. E. and Alkhairi, F. M., “Stress at Ultimate in Unbonded Post Tensionning Tendons-Part 1: Evaluation of the State-of-the-Art,” ACI Structural Journal, Vol. 88, No. 5, 1991, pp. 641-651
- Naaman, A. E. and Alkhairi, F. M., “Stress at Ultimate in Unbonded Post Tensionning Tendons-Part 2: Proposed Methodology,” ACI Structural Journal, Vol. 88, No. 6, 1991, pp. 693-692
- Bondy, K. B., “Realistic Reqirements for Unbonded Post-Tensioning Tendons,” PCI Journal, Vol. 15, No. 1, 1970, pp. 50-59 https://doi.org/10.15554/pcij.02011970.50.59
- Au, F. T. K. and Du, J. S., “Prediction of Ultimate Stress in Unbonded Tendons,” Magazine of Concrete Research, Vol. 56, No. 1, 2004, pp. 1-11 https://doi.org/10.1680/macr.2004.56.1.1
- Macgregor, R. J. G., Kregor, M. E., and Breen, J. E., “Strength and Ductility of Three Span Externally Post-Tensioned Segmental Box Girder Bridge Model,” Research Report No. 365-3F, Center for Transportation Research, The University of Texas, Austin, Texas., 1989, 299 pp
- Robert-Wollmann, C. L., Kregor, M. E., Rogosky, D. M., and Breen, J. E., “Stress in External Tendons at Ultimate,” ACI Structural Journal, Vol. 102, No. 2, 2005, pp. 206-213
- Bui, D. K. and Niwa, J., “Prediction of Loading-Induced Stress in Unbonded Tendons at Ultimate,” Doboku Gakkai Ronbunshu E, Vol. 62, No. 2, 2006, pp. 428-443 https://doi.org/10.2208/jsceje.62.428
- Allouche, E. N., Campbell, T. I., Green, M. F., and Soudki, K. A., “Tendon Stress in Continuous Unbonded Prestressed Concrete Members-Part 1 : Parametric Study,” PCI Journal, Vol. 44, No. 1, 1999, pp. 86-93
- Allouche, E. N., Campbell, T. I., Green, M. F., and Soudki, K. A., “Tendon Stress in Continuous Unbonded Prestressed Concrete Members-Part 2 : Review of Literature,” PCI Journal, Vol. 44, No. 1 1999, pp. 60-73
- 박상렬, “외부 프리스트레싱으로 보강된 R.C 보에서 강재량 및 텐던깊이에 따른 프리스트레싱 강재의 극한응력,” 콘크리트학회 논문집, 15권, 4호, 2003, pp. 585-593 https://doi.org/10.4334/JKCI.2003.15.4.585
- 신경재, 김병준, “고장력 인장봉으로 보강된 RC보의 휨거동에 관한 연구,” 한국강구조학회논문집, 19권, 3호, 2007, pp. 259-270
- Tan, K. H. and Ng, C. K., “Effect of Deviators and Tendon Configuration on Behavior of Externally Prestressed Beams,” ACI Structural Journal, Vol. 88, No. 6, 1991, pp. 1-10
- Harajli, M. H. and Kanj, M. Y., “Service Load Behavior of Concrete Members Prestressed with Unbonded Tendons,” Journal of Structural Engineering, ASCE, Vol. 94, No. 1, 1997, pp. 2569-2589
- Harajli, M. H., Khairallah, N., and Nasif, H., “Externally Prestressed Members: Evaluation of Sencond-Order Effect,” Journal of Structural Engineering, ASCE, Vol. 125, No. 10, 1999, pp. 1151-1161 https://doi.org/10.1061/(ASCE)0733-9445(1999)125:10(1151)
- Sivaleepunth, C., Niwa, J., Bui, D. K., Tamura, S., and Hamada, Y., “Prediction of Tendon Stress and Flexural Strength of Externally Prestressed Concrete Beams,” Doboku Gakkai Ronbunshu E. Vol. 62, No. 1, 2006, pp. 260-273 https://doi.org/10.2208/jsceje.62.260
- Ozkul, O., Nasif, H. H., and Malhas, F., “Deflection Prediction and Cracking of Beams Prestressed with Unbonded Tendons,” Serviceability of Concrete: A Symposium Honoring Dr. E. G. Nawy, SP-225, American Concrete Institute, Farmington Hills, MI, 2005, pp. 93-118
- 임재형, 문정호, 이리형, “비부착 긴장재의응력에 영향을 미치는 중요변수에 대한 실험연구,” 콘크리트학회 논문집, 11권, 1호, 1999, pp. 209-219
- 이득행, 김강수, “포스트텐션 휨부재에서 비부착긴장재의 극한응력,” 콘크리트학회 논문집, 21권, 4호, 2009, pp. 489-500
- Mattok, A. H., “Flexural Strength of Prestressed Concrete Sections by Programable Calculator,” PCI Journal, Vol. 24, No. 1, 1979, pp. 32-54