참고문헌
- Choi, K. J. and Yao, S. C., 1987, “Mechanisms of Film Boiling Heat Transfer of Normally Impacting Spray”, Int. J. Heat Mass Transfer, Vol. 30, No. 2, pp. 311-318 https://doi.org/10.1016/0017-9310(87)90119-0
- Ohkubo, H. and Nishio, S., 1990, “Study on Accurate Prediction of Heat Transfer Characteristics of Mist Cooling(Effects of Surface Wettability)”, JSME Int. Journal Series II, Vol. 33, No. 2, pp. 326-332
- Buckingham, F. P. and Haji-Sheikh, A., 1995, “Cooling of High-Temperature Cylindrical Surfaces Using a Water-Air Spray”, Trans. of the ASME, Vol. 117, pp. 1018-1027 https://doi.org/10.1115/1.2836276
- Lee, P. J., Choi, H. W. and Lee, S. H., 2000, “The Effect of Ambient Air Condition on a Hot Steel Plate Cooled by Impinging Water Jet”, Trans. of the KSME (B), Vol. 24, No. 1, pp. 29-38
- Lee, P. J., Choi, H. W. and Lee, S. H., 2003, “Effect of Nozzle Height on Heat Transfer of a Hot Steel Plate Cooled by an Impinging Water Jet”, Trans. of the KSME (B), Vol. 27, No. 5, pp. 668-676 https://doi.org/10.3795/KSME-B.2003.27.5.668
- Vader, D. T., Incropera, F. P. and Viskanta, R., 1991, “A Method for Measuring Steady Local Heat Transfer to an Impinging Liquid Jet”, Experimental Thermal and Fluid Science, Vol. 4, pp. 1-11 https://doi.org/10.1016/0894-1777(91)90016-K
- Wu, S. J., Shin, C. H. and Cho, H. H., 2004, “The Local Measurements of Single Phase and Boiling Heat Transfer by Confined Planar Impinging Jets”, Trans. of the KSME (B), Vol. 28, No. 8, pp. 895-901 https://doi.org/10.3795/KSME-B.2004.28.8.895
- Zumbrunnen, D. A., Incropera, F. P. and Viskanta, R., 1990, “Method and Apparatus for Measuring Heat Transfer Distributions on Moving and Stationary Plates Cooled by a Planar Liquid Jet”, Experimental Thermal and Fluid Science, Vol. 3, pp. 202-213 https://doi.org/10.1016/0894-1777(90)90088-O
- Xu, F. and Gadala, M. S., 2006, “Heat Transfer Behavior in the Impingement Zone Under Circular Water Jet”, Int. J. Heat and Mass Transfer, Vol. 49, pp. 3785-3799 https://doi.org/10.1016/j.ijheatmasstransfer.2006.03.034
- Baonga, J. B., Louahlia-Gualous, H. and Imbert, M., 2006, “Experimental Study of the Hydrodynamic and Heat Transfer of Free Liquid Jet Impinging a Flat Circular Heated Disk”, Applied Thermal Engineering, Vol. 26, pp. 1125-1138 https://doi.org/10.1016/j.applthermaleng.2005.11.001
- Alifanov, O. M., 1994, “Inverse Heat Transfer Problems”, Springer-Verlag, Berlin
- Beck, J. V., Blackwell, B. and Clair, C. R. ST. JR., 1985, “Inverse Heat Conduction Ill-Posed Problems”, A Wiley-Interscience Publication, New York
- Colaco, M. J. and Orlande, H. R. B., 1999, “Comparison of Different Versions of the Conjugate Gradient Method of Function Estimation”, Numerical Heat Transfer(Part A), Vol. 36, pp. 229-249 https://doi.org/10.1080/104077899274859
- Kim, W. S., Ozisik, M. N. and Choi, E. R., 1999, “Alternate Application of Regular and Modified Conjugated Gradient Method”, Hybrid Methods in Engineering, Vol. 1, No. 3, pp. 217-234
- Kang, D. H., Kwag, D. S., Kim, W. S. and Lee, Y. K., 2003, “A Study on the Estimation of One-Dimensional Heat Fluxes on the Slab in Reheating Furnace by Using Inverse Analysis”, Trans. of the KSME (B), Vol. 27, No. 1, pp. 61-68 https://doi.org/10.3795/KSME-B.2003.27.1.061
- Kim, S. K. and Lee, W. I., 2004, “Implementation of Inverse Method for Estimating Undetermined Boundary in a Two-Dimensional Slab Based on Temperature Measurement”, Numerical Heat Transfer(Part A), Vol. 46, pp. 515-523 https://doi.org/10.1080/10407780490487939
- Wang, T. Y. and Chen, C. C. P., 2003, “Thermal-ADI; A Linear-Time Chip-Level Dynamic Thermal-Simulation Algorithm Based on Alternating-Direction-Implicit(ADI) Method”, IEEE Trans. VLSI Systems, Vol. 11, No. 4, pp. 691-700 https://doi.org/10.1109/TVLSI.2003.812372
- Al-Ahamdi, H. M., Yao, S. C. and Kasperski, K., 2002, “Experimental Study on the Spray Cooling of High Temperature Metal Using Full Cone Industrial Sprays”, 2002 Steelmaking Conference Proceedings, pp. 365-374