DOI QR코드

DOI QR Code

부순모래 치환율별 목표슬럼프 값 고정에 따른 화학혼화제의 특성에 관한 연구

A Study on the Chemical Admixture According to Target Slump Value by Crushed Sand Replacement Rate

  • 발행 : 2008.08.25

초록

With an increased use of alternative aggregate due to exhaustion of quality aggregate resources, the amount of used crushed aggregates have been increased and as a result, development of admixture materials has also been improved and its amount of use is increasing from day to day in order to secure quality in concrete. Accordingly, the purpose of this study is to make concrete of good quality by using chemical admixture developed in this study by replacement rate of fine aggregate. At first, susceptibility, compressive strength ratio and length change ratio in both fresh and hardened concrete were evaluated according to corresponding regulation. As for high performance related regulation, APC NO.3 and PC series were going to rule, and as for AE agent regulation, replacement ratio of fine aggregate of high performance chemical admixture was 10:0 and other chemical admixture met quality regulation for AE agent.

키워드

참고문헌

  1. 개정 콘크리트 표준시방서 해설집, 한국콘크리트 학회편 2003. pp.95-122
  2. 김광서외4인, 콘크리트의 단위수량 추정에 미치는 배합 및 혼 화재 요인의 영향, 대한건축학회학술발표논문집, 2002
  3. 김무한, 신한식, 김문한, 건축재료학, 2000.1
  4. 김을용외 4인, 메타카올린 콘크리트의 특성에 미치는 단위수 량변화의 영향에 관한 실험적 연구, 한국콘크리트학회 학술발 표대회논문집 Vol.17 No.2, p.p. 585-590, 2005
  5. 김정길외3인, 폴리카본산계 고성능감수제를 사용한 고유동 페 이스트의 유동물성, 대한건축학회학술발표논문집, p.p. 475- 480, 2005
  6. 대한건축학회, 건축공사표준시방서, 1999. pp. 107-118
  7. 정일영, 한천구, 정상진, 건축재료실험, 1995
  8. 정헌수 외4명, 건축재료학, 세진사, 2002. pp. 53-69
  9. 한국산업표준협회, KS규격집, 1995
  10. 한국콘크리트학회, 유동화 콘크리트, 기문당, 2004. 12
  11. 한국콘크리트학회, 콘크리트 혼화재료, 기문당, 1997
  12. 한국콘크리트학회, 특수콘크리트공학, 기문당, 2004. 12
  13. 한국콘크리트학회, 최신콘크리트공학, 1997
  14. 한국콘크리트학회, 부순모래 및 부순모래 콘크리트, 기문당, 1998
  15. 한천구, 콘크리트 특성과 배합설계, 1998
  16. 한천구, 황인선, 콘크리트의 내구특성에 미치는 단위수량의 영향, 淸州大學校 産業科學硏究, Vol.20, No.2, 2003
  17. 한천구, 황인성 잔골재 및 혼화재료 요인이 콘크리트의 블리딩에 미치는 영향, 대한건축학회논문집, 제18권 6호, 2002.6
  18. 한천구외3명, 콘크리트의 초기 강도발현에 미치는 혼화재료의 영향, 대한건축학회학술발표논문집, Vol.19 No.9, p.p. 95-102, 2003
  19. Tarun R. Naik. Shiw S. sin호. Mathew P. Tharaniyil, and Robert B. Wendorf, Application of Foundry By-Product Materals in Manufacture of cincrete and Masonry Product. ACI Materials Joural. January-Feburart 1996. pp. 44-51

피인용 문헌

  1. Workability and Strength Characteristics of Lathe Scrap Reinforced Cementitious Composites vol.20, pp.6, 2016, https://doi.org/10.11112/jksmi.2016.20.6.040
  2. A Study on Properties of Concrete Made of Natural and Crushed Sand in High Temperatures vol.24, pp.1, 2012, https://doi.org/10.4334/JKCI.2012.24.1.053