DOI QR코드

DOI QR Code

Developments of Advanced Connection Type for Improvements of Mixed Structures (II)

혼합구조의 성능 향상을 위한 개선된 접합부의 개발 (II): 개선된 접합방식의 성능확인을 위한 모형실험 및 해석

  • 윤익중 (연세대학교 토목공학과) ;
  • 노병철 (상지대학교 건설시스템공학과) ;
  • 김문겸 (연세대학교 토목공학과) ;
  • 조성용 (GS건설(주) 토목구조팀 기술본부)
  • Received : 2007.08.28
  • Accepted : 2007.12.27
  • Published : 2008.03.31

Abstract

This study presents a way to validate the quality level of the proposed connection type and verify the experimental test, and performs a 3D nonlinear analysis corresponding to the experimental test. Two mixed-structure beams were cast and tested under a four-point static loading. Force-displacement relation, force-strain relation, force-opening width, and failure mode were observed from comparing the numerical results of the adopted FE model. Nonlinear analysis of mixed structures was carried out by utilizing the contact elements of a general purpose structural analysis computer program (ABAQUS). The results of numerical and experimental simulation show that the proposed L-shaped connection has greater stiffness under flexural loading and better structural performance with regard to the connection.

본 논문에서는 연계논문에서 제안된 혼합구조 접합부의 개선정도를 확인하기 위하여 2개의 혼합구조 실험체에 대하여 4절점 휨시험을 수행하였다. 혼합구조 접합부의 거동 분석을 위하여 3차원 비선형해석 결과와 실재하 실험 결과를 하중-처짐 관계, 하중-변형률 관계, 접합부 개구폭, 균열과 파괴모드를 통하여 비교하였다. 3차원 비선형 해석을 위하여 접촉요소를 사용하였으며 해석프로그램은 범용 구조 해석프로그램인 아바쿠스를 이용하였다. 실험과 해석의 결과로부터 제안된 L 모양의 접합부가 휨하중에서 기존안보다 강성이 크게 나타났으며, 보다 나은 구조적 성능을 나타냄을 확인하였다.

Keywords

References

  1. 김문겸, 노병철, 김정훈, 박현철(2006) 강-콘크리트 혼합거더 접합부의 정적 거동에 관한 연구, 한국콘크리트학회 봄학술대회논문집, 한국콘크리트학회, Vol. 18, No. 1, pp. 426-429
  2. 연세대학교 건설공학연구소(2004) 복합구조형식 교량의 접합부 거동분석 및 안전성 검토에 관한연구
  3. 허택녕, 윤익중, 김문겸, 조성용(2006) 개선된 접합부 방식을 갖는 혼합구조의 3차원 비선형 해석, 2006년 대한토목학회 정기 학술대회, 대한토목학회, pp. 702-705
  4. ABAQUS (2006) ABAQUS User's Manual, Version 6.6.1, Dassault System, 2004