참고문헌
- Rajukar, K. P., Levy, G., Malshe, A., Sundaram, M. M., McGeough, J., Hu, X., Rensnick, R. and DeSilva, A., 'Micro and Nano Machining by Electro-Physical and Chemical Processes,' Annals of CIRP, Vol. 55, No. 2, pp. 643-666, 2006 https://doi.org/10.1016/j.cirp.2006.10.002
- Masuzawa, T., Okajima, K., Taguchi, T. and Fujino, M., 'EDM-Lathe for Micromachining,' Annals of CIRP, Vol. 51, No. 1, pp. 355-358, 2002 https://doi.org/10.1016/S0007-8506(07)61535-2
- Schuster, R., Kirchner, V., Allongue, P. and Ertl, G., 'Electrochemical Micromachining,' Science, Vol. 289, No. 98, pp. 98-101, 2000 https://doi.org/10.1126/science.289.5476.98
- Masuzawa, T., Fujino, M. and Kobayashi, K., 'Wire Electro-Discharge Grinding Method,' Annals of the CIRP, Vol. 34, No. 1, pp. 431-434, 1985 https://doi.org/10.1016/S0007-8506(07)61805-8
- Park, B. J., 'Effects of Tool Electrode Size on Micro Electrochemical Machining Using Ultra Short Pulses,' PhD Dissertation Seoul National University, 2006
- Kim, B. H., Lee, Y. S., Choi, D. K. and Chu, C. N., 'Taper reduction in micro electrochemical milling using disk type electrode,' J. of the KSPE, Vol.22, No. 4, pp. 167-172, 2005
- Advincula, R. C., 'Polymer Brushes,' Wiley-VHC, Weinheim, pp. 6-10, 2004