참고문헌
- Rodgers, C., Watts, J., Nichols, K. and Brent, R., 2001, Microturbines, in : Borbely, A.M. and Kreider, JF, ed. Distributed Generation, CRC Press, pp. 119-150
- Kang, Y. M., and McKeirnan, R. 2003, “Annular Recuperator Development and Performance Test for 200kW Microturbine,” ASME Paper GT-2003-38522
- Shibata, R., Nakayama, Y., Machiya, S. and Kobayashi, K., 2003, “The Development of 300kW Class High Efficiency Micro Gas Turbine “RGT3R”,” Proc. of the Int. Gas Turbine Congress, Tokyo, Japan, IGTC2003Tokyo TS-115
- McDonald, C. F. and Rogers, C., 2005, “Ceramic Recuperator and Turbine – The Key to Achieving a 40 Percent Efficient Microturbine,” ASME paper GT2005-68644
- Kim, S. W., 2004, The Study on the Development of the Onsite Cogeneration System Using a Microturbine, Report to MOCIE of Korea
- Lee, J. J., Kim, T. S., 2004, “Analysis of Operation Performance of a Micro Gas Turbine Generator System,” Journal of Fluid Machinery, Vol. 8, No. 5, pp.13-21
- Lee, J. J., Yoon, J. E., Kim, T. S., 2006, “Operation Simulation of a Microturbine Based on Test Data,” Journal of Fluid Machinery, Vol. 9, No. 6, pp.22-28 https://doi.org/10.5293/KFMA.2006.9.6.022
- Lee, J. J., Yoon, J. E., Kim, T. S. and Sohn, J. L., 2007, “Performance Test and Component Characteristics Evaluation of a Micro Gas Turbine,” Journal of Mechanical Science and Technology, Vol. 21, No. 1, pp. 141-152 https://doi.org/10.1007/BF03161720
- Lee, J. H. and Kim, T. S., 2006, “Analysis of Design and Part Load Performance of Micro Gas Turbine/Organic Rankine Cycle Combined Systems,” Journal of Mechanical Science and Technology, Vol. 20, pp. 1502-1513 https://doi.org/10.1007/BF02915973
- Kim, T. S., Hwang, S. H., 2004, “Performance Characteristics for Off-design Operation of Micro Gas Turbines,” Journal of Fluid Machinery, Vol. 7, No. 3, pp.39-47 https://doi.org/10.5293/KFMA.2004.7.3.039
- Kim, T. S., Hwang, S. H., 2006, “Part load Performance Analysis of Recuperated Gas Turbines Considering Engine Configuration and Operation Strategy,” Energy, Vol. 31, pp. 260-277 https://doi.org/10.1016/j.energy.2005.01.014
- Gonzalez, M. A., Padilla, R., Willinger, R., 2004, “Combined Heat Power Technologies : Application Studies of Options Including Micro Gas Turbines,” ASME Paper GT-2004-53909
- Brasz, J. J. and Biederman, B. P., 2003, “Low Temperature Waste Heat Power Recovery Using Refrigeration Equipment,” 21st IIR International Congress of Refrigeration, Washington DC, USA, ICR0587
- Toshiaki, T., Masanori, O., Satoshi, S., Kenichirou, M., 2005, “Improvement of Micro Gas Turbine Performance by Steam Injection-Verification of the Steam Injection Effect and Stable Operation-,” Asian Congress on Gas Turbines, ACGT 2005-068
- Capstone Turbine Co., http://www.microturbine.com/
피인용 문헌
- A Study on the Model of Thermal Plume Flow in the Forest Fire vol.12, pp.1, 2009, https://doi.org/10.5293/KFMA.2009.12.1.007
- vol.12, pp.1, 2009, https://doi.org/10.5293/KFMA.2009.12.1.070