Journal of the Korea Concrete Institute (콘크리트학회논문집)

Korea Concrete Institute (한국콘크리트학회)
권호 표지
DOI QR코드

DOI QR Code

An Experimental Study on the Flexural Behavior of RC Beams Strengthened with NSM and EBR CFRP Strips

표면매입 및 외부부착 탄소섬유판으로 보강된 RC보의 휨 거동에 관한 실험 연구

  • 임동환 (동서대학교 건축토목공학부)
  • Published : 2008.10.31
Download PDF
⟨ Previous Next ⟩

Abstract

The purpose of this study is to investigate the flexural strengthening effectiveness for the beams combined reinforced with NSM CFRP strips and EBR CFRP strips. To accomplish this objective, a total of nine concrete T beams were tested. From this study, it is found that the flexural stiffness and strength of the beams combined reinforced with NSM and EBR strips were significantly improved compared to the beams strengthened only with NSM CFRP strip. The maximum increase of flexural strength was 347% compared to the beam without CFRP strip. Failure of the beam combined reinforced with NSM and EBR strips (T shape) is initiated by debonding of EBR strips attached on the bottom face, and it was succeeded a part of separatio-n of NSM strips along the longitudinal direction and secondly failure of NSM strips was occurred, eventually sudden explosive failure with the separation of concrete cover in the shear region. This result shows that the NSM and EBR strips have good combination to resist applied load and the combined reinforcement with NSM and EBR strips can redistribute appropriately the total stress subjected concrete beam to the EBR and NSM strips.

본 연구에서는 탄소섬유판 표면 매입 공법 및 외부 부착공법의 장점을 활용하기 위하여, 새로운 형상의 탄소섬유판을 제작하여 실험을 수행하였으며, 탄소섬유판 표면 매입 및 외부 부착이 혼합된 보강 방식의 휨 거동 효과를 분석하였다. 본 연구 결과, 표면매입 (NSM) 및 표면부착 (EBR) 탄소섬유판이 결합한 T형 탄소섬유판으로 보강된 철근콘크리트 부재의 휨 강성 및 극한강도는 섬유판으로 보강되지 않은 보에 비하여 크게 증진되며, 그 최대 증가율은 보강되지 않은 부재의 경우보다 약 347%로 나타났다. 이는 매입 (NSM) 및 부착 (EBR) 탄소섬유판의 상호 구속 효과가 매우 뛰어나 하중을 분배하여 따라서 저항 능력이 크게 개선되는 것으로 판단되었다. 또한 T형 탄소섬유판으로 보강된 철근콘크리트 부재의 파괴는 표면부착 탄소섬유판의 부착 탈락으로 시작되며, 단계적으로 매입 섬유판의 파괴되면서 전단부 콘크리트 피복이 탈락하는 파괴양상으로 나타났다. 매입 탄소섬유판 (NSM CFRP strip) 및 표면부착 (EBR) 탄소판의 극한변형률은 각각 $8,600{\mu}{\varepsilon}{\sim}22,000{\mu}{\varepsilon}$ 및 $7,000{\sim}9,000{\mu}{\varepsilon}$의 범주로 나타나 하중 분배 능력이 우수하며, 따라서 노후 구조물 보강방식으로 효과적인 것으로 판단된다.

Keywords

References

  1. De Lorenzis, L. and Teng, J. G., "Near-Surface Mounted FRP Reinforcement: An Emerging Technique for Strengthening Structures," ELSEVIER, Composite Part B, Vol. 38, 2007, pp. 119-143. https://doi.org/10.1016/j.compositesb.2006.08.003
  2. Hassen, T. and Rizkalla, S., "Bond Mechanism of Near-Surface- Mounted Fiber-Reinforced Polymer Bars For Flexural Strengthening of Concrete Structures," ACI, Structural Journal, Vol. 101, No. 6, 2004, pp. 830-838.
  3. Hassen, T. and Rizkalla, S., "Investigation of Bond in Concrete Structures Strengthened with Near Surface Mounted Carbon Fiber Reinforced Polymer Strips," ASCE, Composite Construction Journal, Vol. 7, No. 3, 2003, pp. 248-257. https://doi.org/10.1061/(ASCE)1090-0268(2003)7:3(248)
  4. Novidis, D., Pantazopoulou, S. J., and Tentoluris, E., "Experimental Study of Bond of NSM-FRP Reinforcement," ELSEVIER, Construction Building Materials, Vol. 27, 2007, pp. 1760-1770.
  5. Rizkalla, S. and EI-Hacha, R., "Near-Surface-Mounted Fiber- Reinforced Polymer Reinforcements for Flexural Strengthening of Concrete Structures," ACI, Structural Journal, Vol. 101, No. 5, 2004, pp. 717-726.
  6. Taljsten, B., Carolin, A., and Nordin, H., "Concrete Structures Strengthened with Near Surface Mounted Reinforcement of CFRP," Adv, Structure Engineering, Vol. 6, No. 3, 2003, pp. 201-213. https://doi.org/10.1260/136943303322419223
  7. Oehlers, D. J., Rashid, R., and Seracino, R.. "IC Debonding Resistance of Group of FRP NSM Strips in Reinforced Concrete Beams," ELSEVIER, 2007, pp. 1574-1582.
  8. Oehlers, D. J., Liu, I., and Seracino, R., "A Generic Design Approach for EB and NSM Longitudinally Plated RC Beams," ELSEVIER, Construction Building Materials, Vol. 21, 2007, pp. 697-708. https://doi.org/10.1016/j.conbuildmat.2006.06.018
  9. De Lorenzis, L., Strengthening of RC Structures with Near-Surface Mounted FRP Rods, MS Thesis, Dept. of Civ. Engrg., The University of Missouri-Rolla, Rolla, MO, 2000.
  10. De Lorenzis, L., Lundgren, K., and Rizzo, A., "Anchorage Length of Near-Surface Mounted Fiber-Reinforced Polymer Bars for Concrete Strengthening-Experimental Investigation and Numerical Modeling," ACI, Structural Journal, Vol. 101, No. 2, 2004, pp. 269-278.
  11. Mohamed Ali, M. S., Oehlers, D. J., and Giffith, M. C., "Seracino R, Interfacial Stress Transfer of Near Surface Mounted FRP-to-Concrete Joints," Engineering Structures, in Press, 2008.
  12. Raizal Saifulnaz, M. R. Oehlers, D. J., and Seracino, R., "IC Debonding of FRP NSM and EB Retrofitted Concrete: Plate and Cover Interactions Tests", ASCE, Composite, in Press, 2008.
  13. Seracino, R., Raizal Saifulnaz, M. R., and Oehlers, D. J., "Generic Intermediate Crack Debonding Resistance of EB and NSM Plate-to-Concrete Joints," ASCE, Composite Construction Journal, Vol. 11, No. 1, 2007, pp. 62-70. https://doi.org/10.1061/(ASCE)1090-0268(2007)11:1(62)

Cited by

  1. Bond Behavior between Near-Surface-Mounted Fiber Reinforced Polymer Plates and Concrete in Structural Strengthening vol.23, pp.5, 2011, https://doi.org/10.4334/JKCI.2011.23.5.675
  2. Strengthening Effect of Reinforced Concrete Beams Strengthened with NSM CFRP Reinforcements and Various Reinforcement Details vol.23, pp.6, 2011, https://doi.org/10.4334/JKCI.2011.23.6.781
  3. Bond Strength of Near Surface-Mounted FRP Plate in Concrete Corresponding to Space and Bond Length vol.25, pp.1, 2013, https://doi.org/10.4334/JKCI.2013.25.1.037