Journal of the Institute of Electronics Engineers of Korea SD (대한전자공학회논문지SD)

The Institute of Electronics and Information Engineers (대한전자공학회)
권호 표지

Investigation on Fabrication Process and Tolerance of Resistance Body with A Uniform Thickness Shape on Organic Substrate for Application of Embedded Resistor

Embedded Resistor 적용을 위한 Organic 기판 위에 균일한 두께의 형상을 갖는 저항체의 제조공정과 편차에 대한 조사

  • Published : 2008.04.25
Download PDF
⟨ Previous Next ⟩

Abstract

This paper investgated on fabrication process and tolerance of resistance body with a uniform thickness formed by the process of cavity type on organic substrate for application of embedded resistor. To improve the tolerance of resistance value according to a position of PCB cause by conventional screen printing, we introduced the process of cavity type from organic substrate. A resistor with a desired shape and volume was precisely formed by the process of cavity using a resistor paste and screen printing. This method can increase PCB's productivity by shortening its production time because process conditions of a screen prining device can be set quickly without any affection on its position accuracy.

본 논문에서는 Embedded resistor 적용을 위한 오개닉 기판 위에 캐버티(Cavity) 공정에 의해서 형성된 균일한 두께를 갖는 저항체의 제조 방법과 저항편차에 대해서 조사했다. 기존의 스크린 프린팅에 의해서 발생하는 PCB의 위치에 따른 저항값의 편차를 개선하기 위하여 캐버티 공정을 소개했다. 원하는 모양과 부피를 갖는 저항은 스크린 프린팅과 페이스트를 이용하여 cavity 공정에 의해 정확하게 형성되어 졌다. 이 방법은 PCB의 생산 공정시간을 줄일 수 있고, 스크린 프린팅의 정밀도에 의한 큰 영향 없이 빠르게 공정 조건을 배치할 수 있으므로써 생산량을 개선시킬 수 있다.

Keywords

References

  1. T.Lenihan, (2002), "Embedded Thin Film Resistor, Capacitors and Inductors In Flexible Polyimide Films", 1996 Electronic Component and Technology Conference, 1996
  2. Bruce C.Kim, (2001), "A New Test Method for Embedded Passives in High Density Package Substrate", 2001 Electronic Component and Technology Conference, 2001
  3. Richard Ulrich,(2004), "Embedded Resistors and Capacitors for Organic-Based SOP", IEEE Trans. on advanced packaging, Vol.27, No.2, May 2004
  4. William J. Borland and Saul Ferguson, "Embedded Passive Components in Printed Wiring Boards: A Technology Review," Circuitree, March 2001
  5. Gregory Dunn, John Savic, Troy Bachman, Remy Chelini, Tim Dean, (2005), "Improvements in polymer thick film(PTF) resistor technology" circuiTree, Motorola
  6. William D.Callister, (2003), "Materials science and engineering an introduction," Sixth Edition, PP. 581-582
  7. NCMS Program Report, Advanced Embedded Passives Technology(AEPT), Sept 2003