References
- R. Atkinson, "A Simple Theory of the Johnsen-Rahbek Effect," Brit. J. Appl. Phys., 2 [2] 325-32 (1969) https://doi.org/10.1088/0022-3727/2/3/303
- T. Watnabe, T. Kitabayashi, and C. Nakayama, "Electrostatic Force and Absorption Current of Alumina Electrostatic Chuck," Jpn. J. Appl. Phys., 31 2145-50 (1992) https://doi.org/10.1143/JJAP.31.2145
- T. Watnabe, T. Kitabayashi, and C. Nakayama, "Relationship between Electrical Resistivity and Electrostatic Force of Alumina Electrostatic Chuck," Jpn. J. Appl. Phys., 32 864-71 (1993) https://doi.org/10.1143/JJAP.32.864
- J. van Elp, P.T.M. Giesen, and A.M.M. de Groof, "Lowthermal Expansion Electrostatic Chuck Materials and Clamp Mechanisms in Vacuum and Air," Microelectronic Eng., 73-74 941-47 (2004) https://doi.org/10.1016/S0167-9317(04)00248-5
- G. Kalkowski, S. Risse, G. Harnisch, and V. Guyenot, "Electrostatic Chucks for Lithography Applications," Microelectronic Eng., 57-58 219-22 (2001) https://doi.org/10.1016/S0167-9317(01)00519-6
- J. C. Bang, "Fabrication of Borosilicate Glass-Coated Electrostatic Chucks(in Kor.)," J. Microelectronics & Packaging Soc., 9 [1] 49-52 (2002)
- G. Kalkowski, S. Risse, and V. Guyenot, "Electrostatic Chuck Behavior at Ambient Conditions," Microelectronic Eng., 61-62 357-61 (2002) https://doi.org/10.1016/S0167-9317(02)00501-4
- G. Kalkowski, S. Risse, S. Mller, and G. Harnisch, "Electrostatic Chucks for EUV Masks," Microelectronic Eng., 83 714-17 (2006) https://doi.org/10.1016/j.mee.2006.01.049
- C. M. Whang, W. J. Jeong, and S. W. Choi, "Synthesis of Aluminum Nitride Powder from Aluminum Hydroxide by Carbothermal Reduction-Nitridation(in Kor)," J. Kor. Ceram. Soc., 31 [8] 893-901 (1994)
- S. K. Yang and J. B. Kang, "Synthesis of Aluminum Nitride Whisker by Carbothermal Reaction I. Effect of Fluoride Addition(in Kor)," J. Kor. Ceram. Soc., 41 [2] 118-24 (2004) https://doi.org/10.4191/KCERS.2004.41.2.118
- G. A. Slack, "Nonmetallic Crystals with High Thermal Conductivity," J. Phy. Chem. Solids, 34 321-35 (1973) https://doi.org/10.1016/0022-3697(73)90092-9
- S. A. Jang and G. M. Choi, "Electrical Conduction in Aluminum Nitride," J. Am. Ceram. Soc., 76 [4] 957-60 (1993) https://doi.org/10.1111/j.1151-2916.1993.tb05319.x
-
W.-J. Lee, S.-M. Lee, K.-B. Shim, and H.-T. Kim, "Effects of Sintering Conditions on the Electrical Conductivity of 1 wt%
Y_2O_3-doped$ AlN Ceramics(in Kor)," J. Kor. Ceram. Soc., 44 [2] 116-23 (2007) https://doi.org/10.4191/KCERS.2007.44.2.116 - D. R. Clarke, "Varistor Ceramics," J. Am.Ceram. Soc., 82 [3] 485-502 (1999) https://doi.org/10.1111/j.1151-2916.1999.tb01793.x
-
S. Rodewald, J. Fleig, and J. Maier, "The Distribution of Grain Boundary Resistivities in
SrTiO_3$ Polycrystals: a Comparison between Spatially Resolved and Macroscopic Measurements," J. Eur. Ceram. Soc., 21 [10-11] 1749-52 (2001) https://doi.org/10.1016/S0955-2219(01)00108-X
Cited by
- Powder Mixture by Various Dispersants in Non-aqueous Solvents vol.51, pp.4, 2014, https://doi.org/10.4191/kcers.2014.51.4.324