한국신뢰성학회지:신뢰성응용연구 (Journal of Applied Reliability)

  • 제8권2호
  • /
  • Pages.101-111
  • /
  • 2008
  • /
  • 1738-9895(pISSN)
  • /
  • 2733-8320(eISSN)
한국신뢰성학회 (The Korean Reliability Society)
권호 표지

FMEDA를 활용한 디지털 신호처리기 보드의 진단 유효범위의 측정

Measurement of a Diagnostic Coverage for a Digital Signal Processor Board Using an FMEDA

  • 금종룡 (한국원자력연구원 계측제어.인간공학연구부) ;
  • 서용석 (한국원자력연구원 계측제어.인간공학연구부) ;
  • 이준구 (한국원자력연구원 계측제어.인간공학연구부) ;
  • 박재윤 (한국원자력연구원 계측제어.인간공학연구부)
  • Keum, Jong-Yong (I&C.HFE Division, Korea Atomic Energy Research Institute) ;
  • Suh, Yong-Suk (I&C.HFE Division, Korea Atomic Energy Research Institute) ;
  • Lee, Jun-Koo (I&C.HFE Division, Korea Atomic Energy Research Institute) ;
  • Park, Je-Yun (I&C.HFE Division, Korea Atomic Energy Research Institute)
  • 발행 : 2008.06.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Good diagnostics improves both the safety and system unavailability of digital safety systems. The measure of a diagnostic capability is called the Coverage Factor. Because the Failure Modes, Effects and Diagnostic Analysis (FMEDA) provides information on the failure rates and failure mode distributions necessary to calculate a diagnostic coverage factor for a component, the FMEDA can be used as a useful tool to calculate it. Through performing FMEDA on a digital signal processor (DSP) board used in a digital safety system, it is shown that some components of the DSP board can be replaced or improved to satisfy the required diagnostic coverage. That is, the FMEDA can serve as a useful verification tool to design a diagnostic capability for the DSP board.

키워드