Assessment of External and Internal Corrosion Growth Rate for Metallic Water Pipes

상수도 금속관의 외면과 내면 부식속도 평가에 관한 연구

  • 배철호 (한국수자원공사 수자원연구원) ;
  • 김주환 (한국수자원공사 수자원연구원) ;
  • 김정현 (한국수자원공사 수자원연구원) ;
  • 홍성호 (숭실대학교 환경화학공학과)
  • Received : 2007.11.15
  • Accepted : 2007.12.07
  • Published : 2008.01.01

Abstract

In this study, external and internal pit growth rate model and external non-linear regression corrosion model were proposed by measuring pit depths and evaluating various soil factors known to contribute to the corrosion for metallic water pipes. Average pit depths of external and internal for metallic water pipes were measured 1.38 mm and 2.13 mm, and internal pit growth rate also fasted twice than external pit growth rate. This means the corrosion potential of water quality was higher than soil. The corelation between external corrosion rate and each soil corrosion factor was low. However, proposed external non-linear regression corrosion model considering all soil corrosion factors showed a little higher correlation ($R^2=0.46$) than conventional model.

본 연구에서는 상수도 금속관의 관 내 외면 부식상태를 평가하고, 내 외면 부식깊이(속도)와 매설년수의 관계를 통하여 내 외면 공식성장속도, 그리고 국내의 토양특성 인자들이 관 외면부식에 미치는 영향을 평가하여 관 외면의 노후상태를 예측할 수 있는 부식속도 모델을 제안하였다. 수집된 관체의 외면 부식깊이는 평균적으로 1.38 mm, 내면은 2.13 mm이었고, 이는 수질 등 내면부식영향 인자가 토양 등 외면부식영향 인자보다 부식에 미치는 영향이 크기 때문이며, 평균 공식성장 속도도 내면이 외면보다 두 배정도 빠른 것으로 나타났다. 외면부식에 영향을 주는 각 토양과 외면부식속도와의 상관성은 높지 않았으나, 모든 토양항목을 포함하여 회귀분석을 통하여 수립된 외면부식속도 예측모델은 기존 모델과 비교하여 더 높은 상관성을 보였다.

Keywords

Acknowledgement

Supported by : 환경부