Transactions on Electrical and Electronic Materials

  • 제9권6호
  • /
  • Pages.237-242
  • /
  • 2008
  • /
  • 1229-7607(pISSN)
  • /
  • 2092-7592(eISSN)
한국전기전자재료학회 (The Korean Institute of Electrical and Electronic Material Engineers)
권호 표지
DOI QR코드

DOI QR Code

Experimental Study of the Aspheric-plano Lens Fabrication using Compression Glass Molding

  • Ryu, Seong-Mi (Department of Nursing, Gwangju Health College University) ;
  • Kim, Hye-Jeong (Ultra Precision Optics Team, Korea Photonics Technology Institute)
  • 발행 : 2008.12.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The effects of the process parameters in the molding of aspheric glass lenses for camera phone modules have been investigated experimentally. The molding conditions were optimized with respect to the form accuracy (PV) (the response variable) of the molded lens. The experimental conditions were obtained by employing a factorial design method. From the analysis of variance (ANOVA) and P-value (significance level), the slow cooling rate was found to affect the response variable most significantly. The lens molded under the optimum molding condition showed a transcription ratio of 93.4%.

키워드

참고문헌

  1. H. U. Kim, S. H. Jeong, Y. P. Park, S. S. Kim, H. J. Kim, and J. H. Kim, "DLC coating effect of WC core surface for glass molding lens", J. of KIEEME(in Korean), Vol. 19, No. 11, p. 1050, 2006 https://doi.org/10.4313/JKEM.2006.19.11.1050
  2. H. Ohmori and H. M. Shimizi (eds.), Innovations in polishing of precision optics, in: International Progress on Advanced Optics and Sensors, Universal Academy Press Inc., Tokyo, 2003
  3. D. H. Cha, H. J. Kim, H. U. Kim, S. S. Kim, Y. P. Park, and J. H. Kim, "Fabrication and optical evaluation of aspheric glass lenses for 3 megapixel zoom camera phone module", Optical Review, Vol. 14, No. 3, p. 145, 2007 https://doi.org/10.1007/BF02919415
  4. K. Park and J. H. Ahn, "Design of experiment considering two-way interactions and its application to injection molding processes with numerical analysis", J. Mater. Process. Technol., Vol. 146, p. 221, 2004 https://doi.org/10.1016/j.jmatprotec.2003.10.020
  5. X. Lu and L. S. Khim, "A statistical experimental study of the injection molding of optical lenses", J.Mater. Process. Technol., Vol. 113, p. 189, 2001 https://doi.org/10.1016/S0924-0136(01)00606-9
  6. W. B. Young, "Effect of process parameters on injection compression molding of pickup lens", Applied Mathematical Modelling, Vol. 29, p. 955, 2005 https://doi.org/10.1016/j.apm.2005.02.004
  7. H. J. Kim, D. H. Cha, J. K. Lee, S. S. Kim, and J. H. Kim, "A study on pressing conditions in the molding of aspheric glass lenses for phone camera module using design of experiments", J. of KIEEME(in Korean), Vol. 20, No. 8, p. 720, 2007 https://doi.org/10.4313/JKEM.2007.20.8.720
  8. D. H. Cha, H. J. Kim, J. K. Lee, H. U. Kim, S. S. Kim, and J. H. Kim, "A Study of mold grinding and pressing conditions in the molding of aspheric glass lenses for camera phone module", Materials and Manufacturing Processes, Vol. 23, No. 7, p. 683, 2008 https://doi.org/10.1080/15560350802316991