DOI QR코드

DOI QR Code

Annealing Behavior of Pretilt Angles on Polyimide Surface with Rubbing and Ion Beam Irradiation

  • Lee, Sang-Keuk (Department of Electrical & Electronic Engineering, College of Engineering, Yonsei University) ;
  • Lim, Ji-Hun (Department of Electrical & Electronic Engineering, College of Engineering, Yonsei University) ;
  • Oh, Byeong-Yun (Department of Electrical & Electronic Engineering, College of Engineering, Yonsei University) ;
  • Kim, Young-Hwan (Department of Electrical & Electronic Engineering, College of Engineering, Yonsei University) ;
  • Han, Jeong-Min (Department of Electrical & Electronic Engineering, College of Engineering, Yonsei University) ;
  • Seo, Dae-Shik (Department of Electrical & Electronic Engineering, College of Engineering, Yonsei University)
  • 발행 : 2008.12.31

초록

We have studied the liquid crystal (LC) alignment, the pretilt angle generation, and the annealing behavior for a nematic liquid crystal (NLC) on the homogeneous polyimide (PI) surfaces by using the rubbing method and the ion beam (IB) method. An excellent LC alignment of the NLC on the PI surface with rubbing and IB irradiation were observed. The pretilt angle of NLC on the homogeneous PI surface for the rubbing method is decreased from $4.5^{\circ}$ to $3.5^{\circ}$ as rubbing time is increased, that of the for the IB irradiation method is decreased from $0.5^{\circ}$ to $0.1^{\circ}$ as the time of IB irradiation is increased. After the annealing, the pretilt angles of the rubbed PI surfaces increased up to $4^{\circ}$, these of the IB irradiated PI surfaces little increased. It is considered the side chain of the rubbed PI show the its abilities of the original capacities, while the side chain of the IB irradiated PI cannot show the its abilities of the original capacities due to the IB has already destroyed the side chain of the PI.

키워드

참고문헌

  1. D.-S. Seo, K. Muroi, and S. Kobayashi, "Generation of pretilt angle in nematic liquid crystal, 5CB, media aligned polyimide films prepared by spin coating and LB techniques: effects of rubbing", Mol.Cryst. Liq. Cryst., Vol. 213, p. 223, 1992 https://doi.org/10.1080/10587259208028733
  2. B. O. Myrvold and K. Kondo, "A population distribution model for the alignment of nematic liquid crystals", Liq. Cryst., Vol. 17, p. 437, 1994 https://doi.org/10.1080/02678299408036582
  3. R. Arafune, K. Sakamoto, S. Ushioda, S. Tanioka, and S. Murata, "Importance of rubbing-induced inclination of polyimide backbone structure for determination of the pretilt angle of liquid crystals", Phys. Rev. E., Vol. 58, p. 5914, 1998 https://doi.org/10.1103/PhysRevE.58.5914
  4. D.-S. Seo, K. Araya, N. Yoshida, M. Nishikawa, Y. Yabe, and S. Kobayashi, "Effect of the polymertilt angle for generation of pretilt angle in nematic liquid crystal on rubbed polyimide surfaces", Jpn. J.Appl. Phys., Vol. 34, p. L503, 1995 https://doi.org/10.1143/JJAP.34.L503
  5. H. Matsuda, D.-S. Seo, N. Yoshida, K. Fujibayashi, and S. Kobayashi, "Estimation of the static electricity and optical retardation produced by the rubbing polyimide and polyamide films with different fabrics", Mol. Cryst. Liq. Cryst., Vol. 264, p. 23, 1995 https://doi.org/10.1080/10587259508037298
  6. D.-S. Seo, S. Kobayashi, D.-Y. Kang, and H. Yokoyama, "Effects of rubbing and temperature dependence of polar anchoring strength of homogeneously aligned nematic liquid crystal on polyimide Langmuir-Blodgett orientation films", Jpn. J. Appl. Phys., Vol. 34, p. 3607, 1995 https://doi.org/10.1143/JJAP.34.3607
  7. B.-Y. Oh, K.-M. Lee, B.-Y. Kim, Y.-H. Kim, J.-W. Han, J.-M. Han, S.-K. Lee, and D.-S. Seo, "Surface reformation and electro-optical characteristics of liquid crystal alignment layers using ion beam irradiation", J. Appl. Phys., Vol. 104, p. 064502, 2008 https://doi.org/10.1063/1.2978364
  8. C.-H. Ok, D.-H. Kang, K.-M. Lee, J.-W. Han, B.-Y. Kim, B.-Y. Oh, Y.-H. Kim, J.- Y. Hwang, S.-K. Lee, J.-M. Han, and D.-S. Seo, "LC aligning capabilities of a nematic liquid crystal on homeotropic polyimide surface by new ion-beam irradiation", Trans. EEM, Vol. 8, No. 6, p. 265, 2007 https://doi.org/10.4313/TEEM.2007.8.6.265
  9. S.-K. Lee, D. -S. Choi, and D. -S. Seo, "Tilt angle generation in NLC on homeotropic polymer surface with ion beam irradiation as a function of incident angle", Trans. EEM, Vol. 9, No. 3, p. 120, 2008 https://doi.org/10.4313/TEEM.2008.9.3.120
  10. J.-M. Han, B.-Y. Kim, J.-Y. Kim, Y.-H. Kim, J.-W. Han, J.-Y. Hwang, S.-K. Lee, D.-H. Kang, C.-H. Ok, and D.-S. Seo, "Liquid crystal aligning capabilities treated on organic overcoat thin film by ion beam irradiation method", J. of KIEEME(in Korean), Vol. 20, No. 3, p. 245, 2007 https://doi.org/10.4313/JKEM.2007.20.3.245
  11. C.-Y. Lee, Y.-L. Liu, K. Y. Wu, M.-Y. Chen, and J.-C. Hwang, "Argon plasma beam scanning processes on polyimide films for liquid crystal alignment", Jpn. J. Appl. Phys., Vol. 47, p. 226, 2008 https://doi.org/10.1143/JJAP.47.226
  12. P. Chaudharl, J. Lacey, J. Doyle, E. Galligan, S. C. Alan, A. Callegarl, G. Hougham, N. D. Lang, P. S. Andry, R. John, K. H. Yang, M. Lu, C. Cal, J. Speidell, S. Purushothaman, J. Ritsko, M. Samnt, J. Stohrt, Y. Nakagawa, Y. Katoh, Y. Saitoh, K. Saka, H. Satoh, S. Odahara, H. Nakano, J. Nskshski, and Y. Shiota, "Atomic-beam alignment of inorganic materials for liquid-crystal displays", Nature, Vol. 411, p. 56, 2001 https://doi.org/10.1038/35075021
  13. J.-Y. Kim, B.-Y. Oh, B.-Y. Kim, Y.-H. Kim, J.-M. Han, and D.-S. Seo, "Compositional investigation of liquid crystal alignment on tantalum oxide via ion beam irradiation", Appl. Phys. Lett., Vol. 92, p. 043505, 2008 https://doi.org/10.1063/1.2838312
  14. S.-K. Lee, J.-H. Kim, B.-Y. Oh, B.-Y. Kim, J.-W. Han, Y.-H. Kim, J.-M. Han, J.-Y. Hwang, C.-H. Ok, and D.-S. Seo, "Liquid crystal alignment effects treated on SiNx thin film layers using ion beam irradiation", Jpn. J. Appl. Phys., Vol. 46, p. 7711, 2007 https://doi.org/10.1143/JJAP.46.7711