Transactions of the Korean Society of Machine Tool Engineers (한국공작기계학회논문집)

The Korean Society of Manufacturing Technology Engineers (한국생산제조학회)
권호 표지

Research for Patent Application Tendency in the High Reliable Machining Center for Making of Ultra Precisional Component

고정밀 부품 가공을 위한 고유연성 머시닝센터의 특허동향 분석에 관한 연구

  • 김성민 (특허청 제어기계심사팀) ;
  • 고준빈 (한밭대학교 기계설계공학과) ;
  • 박희상 (충남대학교 대학원 BK21 메카트로닉스 사업단)
  • Published : 2008.12.15
Download PDF
⟨ Previous Next ⟩

Abstract

This paper research the trend of technology of the high efficient and reliability machining center and high flexibility parallel manipulator machining center including linear motor machining center, submicron machining center and direct drive 5 axis machining center using patent information of Korea, U.S.A, Japan and Europe. By using this, the technique level of Korea, the International trend of technology and condition of cooperation research was estimated and the necessity of research and development performance about the machining center for the IT part processing were inquired.

Keywords

References

  1. Yotaro, H., and Takaaki, N., 1995, "Actual Conceptual Design Process for an Intelligent Machining Center," Annals of the CIRP, Vol. 44, No. 1, pp. 123-128 https://doi.org/10.1016/S0007-8506(07)62289-6
  2. Lee, S. M., Choi, H., Lee, J. C., and Cheong, S. H., 2000, "A Study on the Surface Grinding using the Machining Center (II)," Proceeding of the Korean Society of Precision Engineering Autumn Conference, pp. 880-883
  3. Park, D. G. and Im, D. S., 2005, "on the Characteristics in Surface Cutting for Face Cutter of Machining Center," Transactions of the Korea Society of Machine Tool Engineers, Vol. 14, No. 2, pp. 21-26
  4. Kim, S. I. and Cho, J. W., 2004, "Thermal Characteristic Analysis of a High-Speed Horizontal Machining Center with Built-in Motor and Linear Motors," Transactions of the Korea Society of Machine Tool Engineers, Vol. 13, No. 5, pp. 30-37
  5. Choi, D. B., Kim, S. I., and Song, J. B., 1994, "Air Cooling Characteristics of a High-Speed Spindle System for Machine Tools," Transactions of the Korean Society of Precision Engineering, Vol. 11, No. 1, pp. 123-128
  6. Kim, S. H., Yoon, K. S., and Lee, M. H., 2003, "Contour Error Analysis and Feed Controller Optimization for Machining Center," Transactions of the Korea Society of Machine Tool Engineers, Vol. 12, No. 3, pp. 17-24
  7. Cho, B. H. and Seong, H. Y., 1999, "A Study on the Design Optimization of Thickness of Machining center Bed under Dynamic Loading by using Genetic Algorithm," Transactions of the Korea Society of Machine Tool Engineers, Vol. 8, No. 1, pp. 67-73
  8. Yoon, J. H., Lee, J. W., Jung, K. Y., and Jung, M. S., 1998, "Cutting Condition for Improving Cutting Efficiency and Accuracy by Ball End mill on a Machining Center," Transactions of the Korea Society of Machine Tool Engineers, Vol. 7, No. 3, pp. 99-103